Interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd0.96Zn0.04 Te (211)B substrates by molecular beam epitaxy

Double-crystal x-ray rocking curve (DCRC) and secondary-ion mass-spectroscopy (SIMS) measurements have been performed to investigate the effect of rapid thermal annealing on the interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd_0.96Zn_0.04Te (211)B substrates by molecular beam epitaxy. The sharp satellite peaks of the DCRC measurements on a 100-period HgTe/CdTe (100Å/100Å) superlattice show a periodic arrangement of the superlattice with high-quality interfaces. The negative direction of the entropy change obtained from the diffusion coefficients as a function of the reciprocal of the temperature after RTA indicates that the Hg diffusion for the annealed HgTe/CdTe superlattice is caused by an interstitial mechanism. The Cd and the Hg concentration profiles near the annealed HgTe/CdTe superlattice interfaces, as measured by SIMS, show a nonlinear behavior for Hg, originating from the interstitial diffusion mechanism of the Hg composition. These results indicate that a nonlinear interdiffusion behavior is dominant for HgTe/CdTe superlattices annealed at 190°C and that the rectangular shape of HgTe/CdTe superlattices may change to a parabolic shape because of the intermixing of Hg and Cd due to the thermal treatment.     

Control of circulating current in two parallel three-phase boost rectifiers

One unique feature in parallel three-phase converters is a potential zero-sequence circulating current. To avoid the circulating current, most present technology uses an isolation approach, such as transformers or separate power supplies. This paper proposes a parallel system where individual converters connect both AC and DC sides directly without additional passive components to reduce size and cost of the overall parallel system. In this case, the control of the circulating current becomes an important objective in the converter design. This paper: (1) develops an averaged model of the parallel converters based on a phase-leg averaging technique; (2) a zero-sequence model is then developed to predict the dynamics of the zero-sequence current; (3) based on the zero-sequence model, this paper introduces a new control variable, which is associated with space-vector modulation; (4) a strong zero-sequence current control loop is designed to suppress the circulating current; and (5) simulation and experimental results validate the developed model and the proposed control scheme.     

Performance of GaAs-AlGaAs V-grooved inner stripe quantum-well wirelasers with different current blocking configurations

GaAs-AlGaAs V-grooved inner stripe (VIS) quantum-well wire (QWW) lasers grown by metalorganic chemical vapor deposition with different current blocking configurations, n-blocking on p-substrate (VIPS), p-n-p-n blocking on n-substrate (VI(PN)_nS) and p-blocking on n-substrate (VINS) have been fabricated and characterized. The VIPS QWW lasers show the most stable characteristics with effective current confinement: one of the lasers shows fundamental transverse mode, lasing up to 5 mW/facet, typical threshold current of 39.9 mA at 818.5 mm, an external differential quantum efficiency of 24%/facet, and characteristic temperature of 92 K. The current tuning rate was almost linear at 0.031 mm/mA, and the temperature tuning rate was measured to be 0.14 nm/°C. Comparison of the light output versus current characteristics of the lasers with different current blocking configurations is presented here     

Apoptotic Effects of Anthocyanins from Vitis coignetiae Pulliat Are Enhanced by Augmented Enhancer of the Rudimentary Homolog (ERH) in Human Gastric Carcinoma MKN28 Cells

Evidence suggests that augmented expression of a certain gene can influence the efficacy of targeted and conventional chemotherapies. Here, we tested whether the high expression of enhancer of the rudimentary homolog (ERH), which serves as a prognostic factor in some cancers, can influence the efficacy of anthocyanins isolated from fruits of Vitis coignetiae Pulliat, Meoru in Korea (AIMs) on human gastric cancer cells. The anticancer efficacy of AIMs was augmented in ERH-transfected MKN28 cells (E-MKN28 cells). Molecularly, ERH augmented AIM-induced caspase-dependent apoptosis by activating caspase-3 and -9. The ERH-augmented apoptotic effect was related to mitochondrial depolarization and inhibition of antiapoptotic proteins, XIAP, and Bcl-2. In addition, reactive oxygen species (ROS) generation was augmented in AIMs-treated E-MKN28 cells compared to AIMs-treated naïve MKN28 cells. In conclusion, ERH augmented AIM-induced caspase-dependent mitochondrial-related apoptosis in MKN28 cells. A decrease in expression of Bcl-2 and subsequent excessive ROS generation would be the mechanism for ERH-augmented mitochondrial-related apoptosis in AIMs-treated MKN28 cells. A decrease in expression of XIAP would be another mechanism for ERH-augmented caspase-dependent apoptosis in AIMs-treated MKN28 cells.     

Delay and link utilization aware routing protocol for wireless multimedia sensor networks

Wireless Multimedia Sensor Networks (WMSNs) consist of networks of interconnected devices involved in retrieving multimedia content, such as, video, audio, acoustic, and scalar data, from the environment. The goal of these networks is optimized delivery of multimedia content based on quality of service (QoS) parameters, such as delay, jitter and distortion. In multimedia communications each packet has strict playout deadlines, thus late arriving packets and lost packets are treated equally. It is a challenging task to guarantee soft delay deadlines along with energy minimization, in resource constrained, high data rate WMSNs. Conventional layered approach does not provide optimal solution for guaranteeing soft delay deadlines due to the large amount of overhead involved at each layer. Cross layer approach is fast gaining popularity, due to its ability to exploit the interdependence between different layers, to guarantee QoS constraints like latency, distortion, reliability, throughput and error rate. The paper presents a channel utilization and delay aware routing (CUDAR) protocol for WMSNs. This protocol is based on a cross-layer approach, which provides soft end-to-end delay guarantees along with efficient utilization of resources. Extensive simulation analysis of CUDAR shows that it provides better delay guarantees than existing protocols and consequently reduces jitter and distortion in WMSN communication.     

Time-of-flight sensor and color camera calibration for multi-view acquisition

This paper presents a multi-view acquisition system using multi-modal sensors, composed of time-of-flight (ToF) range sensors and color cameras. Our system captures the multiple pairs of color images and depth maps at multiple viewing directions. In order to ensure the acceptable accuracy of measurements, we compensate errors in sensor measurement and calibrate multi-modal devices. Upon manifold experiments and extensive analysis, we identify the major sources of systematic error in sensor measurement and construct an error model for compensation. As a result, we provide a practical solution for the real-time error compensation of depth measurement. Moreover, we implement the calibration scheme for multi-modal devices, unifying the spatial coordinate for multi-modal sensors. The main contribution of this work is to present the thorough analysis of systematic error in sensor measurement and therefore provide a reliable methodology for robust error compensation. The proposed system offers a real-time multi-modal sensor calibration method and thereby is applicable for the 3D reconstruction of dynamic scenes.     

A numerical reconstruction method in inverse elastic scattering

In this paper a new numerical method for the shape reconstruction of obstacles in elastic scattering is proposed. Initially, the direct scattering problem for a rigid body and the mathematical setting for the corresponding inverse one are presented. Inverse uniqueness issues for the general case of mixed boundary conditions on the boundary of our obstacle, which are valid for a rigid body as well are established. The inversion algorithm based on the factorization method is presented into a suitable form and a new numerical scheme for the reconstruction of the shape of the scatterer, using far-field measurements, is given. In particular, an efficient Tikhonov parameter choice technique, called Improved Maximum Product Criterion (IMPC) and its linchpin within the framework of the factorization method is exploited. Our regularization parameter is computed via a fast iterative algorithm which requires no a priori knowledge of the noise level in the far-field data. Finally, the effectiveness of IMPC is illustrated with various numerical examples involving a kite, an acorn, and a peanut-shaped object.     

Leaf-to-Whole Plant Spread Bioassay for Pepper and Ralstonia solanacearum Interaction Determines Inheritance of Resistance to Bacterial Wilt for Further Breeding

Bacterial wilt (BW) disease from Ralstonia solanacearum is a serious disease and causes severe yield losses in chili peppers worldwide. Resistant cultivar breeding is the most effective in controlling BW. Thus, a simple and reliable evaluation method is required to assess disease severity and to investigate the inheritance of resistance for further breeding programs. Here, we developed a reliable leaf-to-whole plant spread bioassay for evaluating BW disease and then, using this, determined the inheritance of resistance to R. solanacearum in peppers. Capsicum annuum ‘MC4′ displayed a completely resistant response with fewer disease symptoms, a low level of bacterial cell growth, and significant up-regulations of defense genes in infected leaves compared to those in susceptible ‘Subicho’. We also observed the spreading of wilt symptoms from the leaves to the whole susceptible plant, which denotes the normal BW wilt symptoms, similar to the drenching method. Through this, we optimized the evaluation method of the resistance to BW. Additionally, we performed genetic analysis for resistance inheritance. The parents, F₁ and 90 F₂ progenies, were evaluated, and the two major complementary genes involved in the BW resistance trait were confirmed. These could provide an accurate evaluation to improve resistant pepper breeding efficiency against BW.