一种5 重real-time PCR筛查转基因水稻方法的建立

以转基因水稻中最常用的CaMV35S启动子、NOS终止子、Cry1Ab/Ac基因、HPT基因及SPS水稻内标基因为研究对象，利用5 种不同的荧光信号（FAM、HEX、Taxas Red、Cy5、Cy5.5）进行多重实时聚合酶链式反应（real-time polymerase chain reaction，real-time PCR）检测方法的研究。通过引物组合筛选、反应体系优化、特异性测试、灵敏度测试、适用性测试等一系列实验，建立了5 重real-time PCR方法，灵敏度可达0.032%。此方法具有灵敏度高、结果准确、通量大等优点，可实现水稻中转基因成分的快速、高效检测。     

弹道靶道测量精度检测方法之探讨

该文分析了弹道靶道测量中的精度问题及通常使用的静态检测方法,并针对静态检测与靶道实测相差甚远的问题,提出了一种动态检测方法.该方法充分考虑到弹道靶道的测量对象是高速飞行体以及照片质量、气流附面层、发射时的恶劣环境和振动等因素对测量精度的影响,结合误差理论,给出了动态精度的计算公式,在已建成的IB-12中间弹道靶道中应用,效果良好.     

Coal liquefaction using a hydrogenated creosote oil solvent: H-atom transfer from hydrogen donor components in the solvent

The presence of hydroaromatic, hydrogen donor components in a coal-derived solvent is one of the more important factors in the successful operation of a non-catalytic coal liquefaction process. Various hydrogen donor species present in a hydrogenated creosote oil have been identified. Their rate of disappearance under conditions that are consistent with a short residence time coal liquefaction process has been used to rank the reactivities of the various hydrogen donors. 1,2,3,10b-Tetrahydrofluoranthene was found to be an exceptional donor while 4,5-dihydropyrene, the hexahydropyrenes and 9,10-dihydrophenanthrene were found to be quite active. Sym.-octahydrophenanthrene and 2a,3,4,5-tetrahydroacenaphthene exhibited moderate activity. Tetralin and the four methyltetralin isomers were found to be unreactive under the coal liquefaction conditions employed.     

二滩水电站油、水、风系统设备运行与改造

水电站辅助设备的运行直接影响水电站运行的安全性和可靠性。二滩水电站投运初期，油、水、风系统先后出现了许多问题，通过应用新产品和新技术对其进行了改造。为水电厂辅助设备的设计、选型、安装提供了宝贵的经验，并对水电厂辅助设备的检修、调试和运行维护有一定的指导作用。     

常用激光介质膜的斜入射性能

本文给出了多层介质膜反射率与入射角的关系的计算机程序，并列出了部份常用激光膜片反射率-角度曲线。     

T_C≥400°C高温PTC陶瓷的研制

利用国产原料，采用传统的陶瓷材料制备工艺，研制了居里温度ＴＣ≥４００°Ｃ的高温ＰＴＣ陶瓷，制成了居里温度ＴＣ＝４１２°Ｃ，电阻Ｒ≤１０３Ω，ｌｇ（Ｒｍａｘ／Ｒｍｉｎ）＝４的高性能ＰＴＣ热敏陶瓷材料     

防止减速器“跑,冒,漏”油的几种新方法

介绍了防止减速器“跑，冒，漏”油的几种新方法。     

Explicit robust schemes for implementation of a class of principal value-based constitutive models: Symbolic and numeric implementation

The issue of developing effective and robust schemes to implement a class of the Ogden-type hyperelastic constitutive models is addressed. To this end, special purpose functions (running under MACSYMA) are developed for the symbolic derivation, evaluation, and automatic FORTRAN code generation of explicit expressions for the corresponding stress function and material tangent stiffness tensors. These explicit forms are valid over the entire deformation range, since the singularities resulting from repeated principal-stretch values have been theorectically removed. The required computational algorithms are outlined, and the resulting FORTRAN computer code is presented.     

镀镍云母导电复合材料的研究

对云母粒子化学镀镍及以LDPE为基材,镀镍云母粒子为填料制备的导电复合材料进行研究。认为此种导电复合材料只有质量轻、强度大及良好的导电等性能。