An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding

Abstract

The I-shaped cross-sectional beam of CFRP (CFRP I-beam) is usually manufactured by the continuous protrusion method. Carbon fibers can only be arranged in the longitudinal direction. The CFRP I-beam with arbitrary arrangement of carbon fiber was manufactured with applying the electro-activated deposition molding method. The carbon fiber fabric was immersed in the deposition solution and energized, epoxy resin precipitated around carbon fiber and impregnated. The resin-impregnated fabric was installed to the mold, and the CFRP I-beam was fabricated. The CFRP I-beam was subjected to three-point bending tests, and the relationship between load-deflection was simulated by finite-element analysis.     

Effect of applying voltage on photocatalytic destruction of 1,4-dioxane in aqueous system

In the current work, we prepared a TiO₂ coating on stainless mesh using electrophoretic deposition (EPD), and applied voltage to a stainless mesh to examine the synergy effect on photocatalysis of both 1,4-dioxane and ethylene glycol diformate (EGDF), a main intermediate of the photocatalysis of 1,4-dioxane. The photocatalytic decomposition rate of 1,4-dioxane depends on applying voltage under diffusion-limited reaction conditions. Ethylene glycol diformate and 1,4-dioxane exhibited inverse voltage dependence. Voltage swing provides high-efficiency photocatalysis of 1,4-dioxane while suppressing EGDF formation. This method will be effective for a photocatalysis system containing several chemicals, each with different voltage dependence.     

Preparation of a crack-free rough titania coating on stainless steel mesh by electrophoretic deposition

TiO₂ (anatase) coating was prepared on stainless mesh by electrophoretic (EPD) process utilizing an isopropyl alcohol (IPA)-based suspension with submicron TiO₂ powder. When the deposition time was 30 s, a smooth thin coating was obtained. It remained crack-free even after sintering. Coating surface morphology was roughened by UV pre-illumination of the suspension. Photocatalytic decomposition of IPA to acetone and resultant electrochemical reaction at cathode during EPD provides heterogeneous deposition.     

The performance of wood and tile roofing assemblies exposed to continuous firebrand assault

The performance of tile roofing assemblies as well as untreated cedar shake roofing assemblies exposed to continuous firebrand showers were compared. Specifically, experiments were conducted for two types of concrete tile roofing assemblies (flat and profiled), one type of terracotta tile roofing assembly (flat) and an untreated (without any fire retardant) cedar shake roofing assembly. The design of the roofing assemblies was based on construction guidelines in the USA. The duration of the firebrand flux was fixed at 20 min, and the wind speed was varied from 6 m/s to 9 m/s. These wind speeds were chosen to be able to compare roofing assembly performance to similar assemblies exposed to a batch‐feed firebrand generator which had limited duration of firebrand exposure (6 min). The average firebrand mass flux that arrived at the surface of the roofing assemblies was 0.3 g/m²s Results indicated that for the untreated cedar shake assemblies, ignition occurred easily from the firebrand assault, and this type of roofing assembly generated their own firebrands after ignition. To attempt to quantify the degree of penetration, the number of firebrands that penetrated the tile roofing assemblies, and deposited onto the underlayment/counter‐batten system was counted as function of wind speed for each assembly. Firebrand penetration was observed, even for the flat tile assemblies. It is believed that these are the first‐ever experiments described in the peer‐reviewed literature to expose wood and tile roofing experiments to continuous wind‐driven firebrand showers. Copyright © 2016 John Wiley & Sons, Ltd.     

Understanding structure ignition vulnerabilities using mock‐up sections of attached wood fencing assemblies

Firebrand production from structure combustion becomes a key factor in the magnitude of how quickly a large outdoor fire may spread. Post‐fire disaster investigations suggest that attached building components, such as wood fencing assemblies are known to be prone to ignition in these fires, and may provide pathways to structure ignition. Here, a comparison of ignition results from full‐scale fencing assembly experiments conducted using a full‐scale wind tunnel facility, to mock‐ups of full‐scale fencing assemblies using the recently developed experimental capability at the National Research Institute of Fire and Disaster (NRIFD) are discussed. In both experimental facilities, the fencing assemblies were exposed to firebrand showers using custom built continuous feed firebrand generators with size and mass distributions similar to those generated from structure combustion. Similar ignition behaviors were observed between the full‐scale fencing assemblies and the mock‐up of full‐scale fencing assemblies. Additional experiments are required for other fencing assembly types to further verify these important findings.     

Experimental investigation of structure vulnerabilities to firebrand showers

Attempting to experimentally quantify the vulnerabilities of structures to ignition from firebrand showers has remained elusive. The coupling of two facilities has begun to unravel this difficult problem. The NIST Firebrand Generator (NIST Dragon) is an experimental device that can generate a firebrand shower in a safe and repeatable fashion. Since wind plays a critical role in the spread of WUI fires in the USA and urban fires in Japan, NIST has established collaboration with the Building Research Institute (BRI) in Japan. BRI maintains one of the only full scale wind tunnel facilities in the world designed specifically for fire experimentation; the Fire Research Wind Tunnel Facility (FRWTF). The present investigation is aimed at extensively quantifying firebrand penetration through building vents using full scale tests. A structure was placed inside the FRWTF and firebrand showers were directed at the structure using the NIST Dragon. The structure was fitted with a generic building vent, consisting of only a frame fitted with a metal mesh. Six different mesh sizes openings were used for testing. Behind the mesh, four different materials were placed to ascertain whether the firebrands that were able to penetrate the building mesh assembly could ignite these materials. Reduced scale test methods afford the capability to test new vent technologies and may serve as the basis for new standard testing methodologies. As a result, a new experimental facility developed at NIST is presented and is known as the NIST Dragon's LAIR (Lofting and Ignition Research). The NIST Dragon's LAIR has been developed to simulate a wind driven firebrand attack at reduced scale. The facility consists of a reduced scale Firebrand Generator (Baby Dragon) coupled to a bench scale wind tunnel. Finally, a series of full scale experiments were conducted to visualize the flow of firebrands around obstacles placed downstream of the NIST Dragon. Firebrands were observed to accumulate in front of these obstacles at a stagnation plane, as was observed when the structure was used for firebrand penetration through building vent experiments, due to flow recirculation. The accumulation of firebrands at a stagnation plane presents a severe threat to ignitable materials placed near structures.     

Effects of dressing containing plant sterol on serum cholesterol concentration and the safety evaluation in borderline or mildly hypercholesterolemic Japanese subjects

In a placebo-controlled double-blind study, we examined the effects of dressing containing plant sterol (PS) on blood lipids and the safety in Japanese borderline or mildly hypercholesterolemic subjects. Fifty-nine subjects [total cholesterol (TC) concentration > or = 200 mg/dL] were randomly divided into two groups and were given daily 15 g of dressing containing 800 mg of PS [PS(+)-group] or without PS [PS(-)-group] for 12 weeks. Every 4 weeks, fasting blood was examined and subjective symptoms were analyzed. Serum TC, low-density lipoprotein cholesterol (LDL-C) and apolipoprotein B (ApoB) concentrations did not change in the PS(-)-group, while TC and ApoB significantly decreased in the PS(+)-group at 8 and 12 weeks and LDL-C at 4, 8 and 12 weeks. Moreover, serum TC, LDL-C and ApoB concentrations were significantly lower than those of PS(-)-group at 8 and 12 weeks. Other laboratory tests were all in normal ranges and no adverse events were observed. The results indicated that PS-containing dressing decreased serum TC, LDL-C and ApoB concentrations in borderline or mildly hypercholesterolemic subjects. It is therefore proved that the dressing containing PS is helpful in maintaining blood cholesterol level normal and hence, the health of Japanese.     

Developmental ability of cloned embryos from neural stem cells

The success rate is generally higher when cloning mice from embryonic stem (ES) cell nuclei than from somatic cell nuclei, suggesting that the embryonic nature or the undifferentiated state of the donor cell increases cloning efficiency. We assessed the developmental ability of cloned embryos derived from cultured neural stem cell (NSC) nuclei and compared the success rate with that of embryos cloned from other donor cells such as differentiated NSCs, cumulus cells, Sertoli cells and ES cells in the mouse. The transfer of two-cell cloned embryos derived from cultured NSC nuclei into surrogate mothers produced five live cloned mice. However, the success rate (0.5%) was higher in embryos cloned from cultured NSC nuclei than from differentiated NSCs (0%), but lower than that obtained by cloning mice from other cell nuclei (2.2-3.5%). Although the in vitro developmental potential to the two-cell stage of the cloned embryos derived from NSC nuclei (73%) was similar to that of the cloned embryos derived from other somatic cell nuclei (e.g., 85% in Sertoli cells and 75% in cumulus cells), the developmental rate to the morula-blastocyst stage was only 7%. This rate is remarkably lower than that produced from other somatic cells (e.g., 50% in Sertoli cells and 54% in cumulus cells). These results indicate that the undifferentiated state of neural cells does not enhance the cloning efficiency in mice and that the arrest point for in vitro development of cloned embryos depends on the donor cell type.     

Experimental and Molecular Dynamics Simulations of Tribochemical Reactions with ZDDP: Zinc Phosphate–Iron Oxide Reaction

Zinc phosphate glass is considered to be the main constituent of tribofilms generated under boundary lubrication with zinc dialkyldithiophosphate (ZDDP), a well-known antiwear additive. The reaction occurring during friction between zinc phosphate glasses and steel native iron oxide layer is investigated by both an experimental approach and by Molecular Dynamics simulations (MD). The importance of this “tribochemical” reaction in the general ZDDP antiwear process is discussed.     

A Comparison of Equating Methods and Linking Designs for Developing an Item Pool under Item Response Theory

The existence of an item pool can bring out the various merits of using item response theory (IRT). This study considered the case where the development of an item pool is in progress. We examined the robustness of four calibration methods in three linking designs using simulated data. The data were generated assuming that a small-sized item pool had already been developed and new items were to be added to that item pool. The results suggested that the item characteristic curve method generally performed well. The performance of the fixed common item parameter calibration method and the concurrent calibration method worsened in one of the linking designs where the number of common items was small. The results also suggested that performance was better when the sample size per form and the number of common items were large.