Accurate estimation of capacities and cross-traffic of all links in a path using ICMP timestamps

The estimation of the link capacity and its available bandwidth in an end-to-end path is crucial for network management, admission control and flow control for adaptive applications. This paper introduces an estimation mechanism able to accurately estimate the available bandwidth of all links in an end-to-end path, through its capacity and cross-traffic estimation. The estimation procedures resort to the dispersions of packet pairs and trains using the concepts of ICMP Timestamp and Traceroute that, efficiently used together, enable the measurement of the dispersions in all links in the path. These mechanisms were evaluated through simulation experiments, where we analyzed the influence of the several network parameters on each estimation mechanism. The results show that these estimation methods are able to accurately estimate both the capacity and the cross-traffic of all links in a path with moderate length and with low overhead.     

Atmospheric corrosion of reference metals in Antarctic sites

This paper presents the results obtained at three Antarctic test sites participating in the “Ibero-American Map of Atmospheric Corrosiveness” (MICAT), a project on atmospheric corrosion carried out during the period 1988–1994 at some 70 sites distributed across 12 countries of the Latin-American region, Spain and Portugal. The three Antarctic sites are located near the coastline.The singular climatic characteristics of Antarctic regions are related with the purity of the air, the absence of rainfall and the formation of ice on the metallic surface during an important part of the exposure time. However, electrochemical activity is possible below ice layers. This situation affects the structure and morphology of corrosion product films and the resulting corrosion rates of metallic surfaces.     

Mechanical improvement of concrete by irradiated polypropylene fibers

Fiber reinforced concrete (FRC) contains fibers physically mixed with gravel, sand, cement, and water. So far, adequate mechanical performance of FRC has been obtained at high cost and using complex technologies; important here is the geometry and surface characteristics of the polymers. We have modified polymeric‐fiber surfaces by using gamma radiation. Irradiated polypropylene (PP) fibers were submitted to 0, 5, 10, 50, and 100 kGy of gamma irradiation dosages. First, tensile strength of PP fibers was evaluated, and then fibers blended at 0, 1.0, 1.5, and 2.0% in volume with Portland cement, gravel, sand, and water. The highest values of compressive strength were obtained with irradiated‐fibers at 10 kGy and 1.5% in volume of fiber. The result is 101 MPa, as compared to 35 MPa for simple concrete without fibers. POLYM. ENG. SCI., 45:1426–1431, 2005. © 2005 Society of Plastics Engineers     

Do individual factors matter? A survey of scientists’ patenting in Portuguese public research organisations

This paper addresses scientists’ behaviour regarding the patenting of knowledge produced in universities and other public sector research organisations (PSROs). Recent years have witnessed a rapid growth in patenting and licensing activities by PSROs. We argue that the whole process depends to a certain extent on scientists’ willingness to disclose their inventions. Given this assumption, we conduct research into individual behaviour in order to understand scientists’ views concerning the patenting of their research results. Data from a questionnaire survey of Portuguese researchers from nine PSROs in life sciences and biotechnology is presented and analysed and complemented with in-depth interviews. The results reveal that overall the scientists surveyed show a low propensity to become involved in patenting and licensing activities, despite the fact that the majority had no “ethical” objections to the disclosure of their inventions and the commercial exploitation of these. Perceptions about the impacts of these activities on certain fundamental aspects of knowledge production and dissemination are however divergent. This may account for the low participation levels. Furthermore, most scientists perceived the personal benefits deriving from this type of activity to be low. Similarly, the majority also believed that there are many difficulties associated with the patenting process and that they receive limited support from their organisations, which lack the proper competences and structures to assist with patenting and licensing.     

Medium and substitution pattern effects on the action of hydroxyflavones as photoprotectors against singlet molecular oxygen-mediated photooxidation of fats

The ability of mono-, di-, tri-and tetra-hydroxyflavones (7-and 3-hy-droxyflavones, 7, 8-dihydroxyflavone, baicalein and fisetin) to act as photoprotectors against singlet molecular oxygen [O²(Δ_g)]-initiated photooxidation of fats has been established by a kinetic study. The overall quenching rate constants for a series of five hydroxyflavones perfectly parallel their respective behaviour as inhibitors of the sensitized photooxidation of linoleic acid. The best antioxidative effect was exerted by 7-hydroxyflavone which does not chemically react with O²(¹Δ_g). Nevertheless for the remaining flavonoids of the series, the physical deactivation of O²(¹Δ_g) largely prevails over the chemical process. As for the cases of phenols and related hydroxy-aromatic derivatives, the ionization of the -OH group in the flavones, dramatically accelerates the rate of photooxidation. Under these conditions, the 7-hydroxyflavone also reacts effectively with O²(¹Δ_g). Given that flavonoids are natural oil components, this medium effect should be taken into account during the oil-refining process, in order to avoid the flavonoid photodestruction.     

Qualitative and Quantitative Comparison of Plasma Exosomes from Neonates and Adults

Exosomes are extracellular vesicles that contain nucleic acids, lipids and metabolites, and play a critical role in health and disease as mediators of intercellular communication. The majority of extracellular vesicles in the blood are platelet-derived. Compared to adults, neonatal platelets are hyporeactive and show impaired granule release, associated with defects in Soluble N-ethylmaleimide-sensitive fusion Attachment protein REceptor (SNARE) proteins. Since these proteins participate in biogenesis of exosomes, we investigated the potential differences between newborn and adult plasma-derived exosomes. Plasma-derived exosomes were isolated by ultracentrifugation of umbilical cord blood from full-term neonates or peripheral blood from adults. Exosome characterization included size determination by transmission electron microscopy and quantitative proteomic analysis. Plasma-derived exosomes from neonates were significantly smaller and contained 65% less protein than those from adults. Remarkably, 131 proteins were found to be differentially expressed, 83 overexpressed and 48 underexpressed in neonatal (vs. adult) exosomes. Whereas the upregulated proteins in plasma exosomes from neonates are associated with platelet activation, coagulation and granule secretion, most of the underexpressed proteins are immunoglobulins. This is the first study showing that exosome size and content change with age. Our findings may contribute to elucidating the potential “developmental hemostatic mismatch risk” associated with transfusions containing plasma exosomes from adults.     

Structural characterization of reactor blends of polypropylene and ethylene‐propylene rubber

Blends of isotactic polypropylene (PP), ethylene‐propylene rubber copolymer (EPR), and ethylene‐propylene crystalline copolymer (EPC) can be produced through in situ polymerization processes directly in the reactor and blends with different structure and composition can be obtained. In this work we studied the structure of five reactor‐made blends of PP, EPR, and EPC produced by a Ziegler‐Natta catalyst system. The composition of EPR was related to the ratio between ethylene and propylene used in the copolymerization step. The ethylene content in the EPR was in the range of 50–70 mol %. The crystallization behavior of PP and EPC in the blends was influenced by the presence of the rubber, and some specific interactions between the components could be established. By preparative temperature rising elution fractionation (P‐TREF) analysis, the isolation and characterization of crystalline EPC fractions were made. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2155–2162, 2004     

Effect of low‐temperature plasma and chitosan treatment on wool dyeing with Acid Red 27

This study examines in detail the influence of low‐temperature plasma and biopolymer chitosan treatments on wool dyeability. Wool knitted fabrics were treated and characterized by whiteness and shrink‐resistance measurements. Surface modification was assessed by contact‐angle measurements of human hair fibers, which were used as a model to study the wetting properties of the treated wool knitted fabrics. The dyeing behavior was assessed from the diffusion mechanism point of view. The dyeing kinetics were measured at two different pHs (4.2 and 6.5) and three different temperatures (60, 85, and 100°C) to gain information about the contribution of the surface modification treatment to the dyeing mechanism. The exhaustion and reflectance data were compared, and the apparent diffusion coefficients were calculated. On the basis of the obtained results, a model for the dyeing mechanism of the chitosan treated wool was proposed. When treated with chitosan, the polymer sheath spread on the surface of the fibers acted as a predominant dyeing site in very short dyeing times, thus interacting with the dye and in later stages imparting the dye to the wool fiber. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2204–2214, 2005     

A description of phase inversion behaviour in agitated liquid-liquid dispersions under the influence of the Marangoni effect

The influence of the Marangoni effect on phase inversion behaviour is examined by integrating a microscopic study of the drop coalescence process, in which thin film drainage in the presence of insoluble surfactant occurs, into a macroscopic phase inversion model which has been developed previously using a Monte Carlo technique. This is achieved via an immobility factor, obtained from a comparison of the film drainage times for surfactant-laden systems and surfactant-free systems as a function of the drop approach velocity, surface Péclet number, initial surfactant concentration and the Hamaker constant, which is then used to modify the coalescence probability in the phase inversion model. On the one hand, the results indicate that the Marangoni effect removes any influence that the viscosity ratio has on phase inversion due to immobilisation of the interface, thus shielding the flow in the film from the effects of the flow in the dispersed phase; the point at which phase inversion occurs therefore tends towards equivolume holdups with the addition of surfactant. On the other hand, when comparisons are made with pure systems in which surfactant is absent, the system is seen to be either stabilised or de-stabilised from inversion depending on the viscosity ratio of the system. This is attributed to the influence of surfactant on the dispersion morphologies on either side of the inversion (i.e. water-in-oil dispersions and oil-in-water dispersions) and depends on the dispersed phase holdup; the Marangoni effect is felt stronger when the dispersed phase holdup is low.     

Trans-10 18:1 in ruminant meats: A review

Trans (t) fatty acids (TFA) from partially hydrogenated vegetable oils (i.e., industrial trans) have been phased out of foods in many countries due to their promotion of cardiovascular disease. This leaves ruminant-derived foods as the main source of TFA. Unlike industrial TFA where catalytic hydrogenation yields a broad distribution of isomers, ruminant TFA are enzymatically derived and can result in enrichment of specific isomers. Comparisons between industrial and ruminant TFA have often exonerated ruminant TFA due to their lack or at times positive effects on health. At extremes, however, ruminant-sourced foods can have either high levels of t10- or t11-18:1, and when considering enriched sources, t10-18:1 has properties similar to industrial TFA, whereas t11-18:1 can be converted to an isomer of conjugated linoleic acid (cis(c)9,t11-conjugated linoleic acid), both of which have potential positive health effects. Increased t10-18:1 in meat-producing ruminants has not been associated with negative effects on live animal production or meat quality. As such, reducing t10-18:1 has not been of immediate concern to ruminant meat producers, as there have been no economic consequences for its enrichment; nevertheless at high levels, it can compromise the nutritional quality of beef and lamb. In anticipation that regulations regarding TFA may focus more on t10-18:1 in beef and lamb, the present review will cover its production, analysis, biological effects, strategies for manipulation, and regulatory policy.