Fuzzy inference and fuzzy inference processor

Fuzzy inference, a data processing method based on the fuzzy theory that has found wide use in the control field, is reviewed. Consumer electronics, which accounts for most current applications of this concept, does not require very high speeds. Although software running on a conventional microprocessor can perform these inferences, high-speed control applications require much greater speeds. A fuzzy inference date processor that operates at 200000 fuzzy logic inferences per second and features 12-b input and 16-b output resolution is described     

Extensions of polyacrylic acid ammonium salts in the adsorption layer to fluidize alumina slurries

An average shell volume occupied in the adsorption layer on alumina by a polyacrylic acid ammonium salts molecule (PAA) defined as the average area occupied by an adsorbed PAA on alumina multiplied by the average thickness of the water layer at the limit of thickening, has been calculated from the adsorbed amount of PAA and from the flow points of alumina in the presence of PAA of different molecular weights. A steric effect of the PAA dispersant on the dispersion of alumina resulted in a flow with no yield stress. This was due to the change of the extension of PAA in the adsorption shell from a sphere to an ellipsoid with a long axis which exceeded the effective distance that the van der Waals attraction force reaches at a molecular weight for the PAA of between 10 000–20 000.     

Neutral poly(3,4-ethylenedioxythiophene-2,5-diyl)s: preparation by organometallic polycondensation and their unique p-doping behavior

Neutral and non-doped poly(3,4-ethylenedioxythiophene), PEDOTh(Ni), and its hexyl derivative, PEDOTh-C₆(Ni), have been prepared by organometallic dehalogenation polycondensation of 2,5-dichloro-3,4-ethylenedioxythiophene and its hexyl derivative with a zerovalent nickel complex. PEDOTh-C₆(Ni) was soluble in organic solvents and ¹H NMR data indicated that it had an M_n of 11,000. MALDI-TOF mass analysis of PEDOTh(Ni) gave M_n and M_w of about 1700 and 2400, respectively. PEDOTh-C₆(Ni) showed a UV-Vis absorption peak at 546 nm in CHCl₃. Electrochemical oxidation of PEDOTh-C₆(Ni) started at about −0.40 V vs Ag⁺/Ag and gave a peak at 0.20 V vs Ag⁺/Ag. Chemical and electrochemical oxidation (or p-doping) of PEDOTh-C₆(Ni), both in solutions and in a solid state, led to weakening of the original π-π^∗ peaks and rise of new peak(s) in a region of 800-1500 nm. The p-doping of PEDOTh-C₆(Ni) caused not only a decrease in the intensity of ¹H NMR signals of the bridging ethylene hydrogens but also a decrease in that of the hexyl side chain, suggesting a strong interaction of the p-dopant with the side chain. NMR data of poly(3-methoxythiophene-2,5-diyl) also supported an assumption that p-doping brings about a severe change in electronic state of the substituent attached to the polythiophene main chain. PEDOTh(Ni) had a density of 1.71 g cm⁻³; the molecular packing mode of PEDOTh(Ni) is discussed based on the density of the polymer and its XRD data.     

Structural Control of Rashba Spin–Orbit Coupling in In0.52Al0.48As/In0.53Ga0.47As/In0.52Al0.48As Quantum Wells

We investigated the correlation between the Rashba spin–orbit coefficient α and potential shape of the quantum wells (QW), where α values are experimentally deduced from the weak antilocalization analysis. We studied the gate I–V properties of the QW samples and have obtained results consistent with the potential shapes predicted for these QWs.     

Theory and characteristics of novel variable reluctance 1X resolver

Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.     

Molecular characterization of a single mitochondria-associated double-stranded RNA in the green alga Bryopsis

OBJECTIVE: To evaluate the effect of a moderate dose of fish oil on glycemic control and in vivo insulin action in type 2 diabetic men with elevated plasma triacylglycerols and to determine the effect of the same treatment on gene expression of GLUT4, lipoprotein lipase (LPL), and hormone-sensitive lipase (HSL) in the abdominal adipose tissue. RESEARCH DESIGN AND METHODS: A total of 12 type 2 diabetic men were randomly allocated to 2 months of 6 g daily of either fish oil or sunflower oil, separated by a 2-month washout interval, in a double-blind crossover design. RESULTS: For glucose metabolism, 2 months of fish oil supplementation compared with sunflower oil led to similar fasting plasma insulin, glucose, and HbA1c. Basal hepatic glucose production did not increase after fish oil. There was no difference in insulin suppression of hepatic glucose production nor in insulin stimulation of whole-body glucose disposal measured by the euglycemic-hyperinsulinemic clamp. Fish oil did not ameliorate the low mRNA level of GLUT4 in adipose tissue of these patients. For lipid profile, fish oil lowered plasma triacylglycerol more than sunflower oil (P < 0.05) and tended to increase the amount of mRNA of both LPL and HSL in adipose tissue. CONCLUSIONS: A moderate dose of fish oil did not lead to deleterious effects on glycemic control or whole-body insulin sensitivity in type 2 diabetic men, with preserved triacylglycerol-lowering capacities.     

Surface active N-acylglutamate: I. Preparation of long chain N-acylglutamic acid

Long chain N-acylglutamic acid was prepared in a high yield by a reaction of glutamic acid with fatty acid chloride in a mixed solvent of water and a water miscible organic solvent such as acetone, methyl ethyl ketone, dioxane, tetrahydrofuran,t-butyl alcohol or cyclohexanone. In this reaction the composition of the mixed solvent influenced the yield of N-acylated glutamic acid and the best yield was obtained when the reaction was carried out in the mixed solvent comprising 30–60% v/v of the organic solvent. Long chain N-acylaspartic acid was also obtained in a high yield by the same method. As the other method to obtain N-lauroyl-D L-glutamic acid, it was examined that N-acyl-α-aminoglutarodinitrile which was obtained by a reaction of α-aminoglutarodinitrile with fatty acid chloride was hydrolyzed with an aqueous alkaline solution. The salts of long chain N-acylglutamic acid are known as the surface active agents that react mildly on the human skin.     

Cholesteryl ester compounds containing alkyl branched acyl groups — their preparations,properties and applications

Cholesterol having a reactive hydroxyl group at C₃-position can react with fatty acids to give the corresponding cholesteryl esters. Most of the natural cholesteryl esters consist of straight alkyl chain fatty acids with a high melting point. In oleochemistry it is well known that alkyl branched fatty acids, which are derived from petroleum or the fat and oil industry, have low melting points (mp.) and are chemically more stable if they are saturated acids. We designed alkyl branched fatty acid cholesteryl esters by means of common esterification and found some esters having a low mp. (mostly as a liquid). They had no irritative effect on both animal and human skin. They showed characteristic emulsification properties, namely the formation of either O/W or W/O emulsion coexistence together with other lipid components. Applying them onto human skin, they were able to penetrate towards the stratum corneum and improve the water-retaining ability and the barrier function of the stratum corneum. Based on these properties we have been applying the alkyl branched fatty acid cholesteryl ester, especially the methyl branched isostearic acid cholesteryl ester (IS-CE), to a shampoo and a rinse as hair cosmetics, skin care cosmetics and bath-additive products in the past decade.     

Achieving evenhandedness in certified email system for contract signing

Certified email is a system which enables a sender to prove a receiver’s receipt of email. Such a system can be used for applications related to electronic commerce on the Internet. This paper considers a situation where a sender or a receiver wants to change his/her mind due to the change of mail content value (e.g., stock, auction, gambling) during the transaction. We point out that no traditional certified email systems have been designed for such a case, thus one of the participants can be at a disadvantage. To avoid this problem, we propose an evenhanded certified email system in which each participant can change his/her choice, either cancel or finish the transaction, at any time during the transaction.