Characterization of the chicken and quail homologues of the human gene responsible for the X-linked Kallmann syndrome

The human KAL gene, responsible for the X-linked Kallmann syndrome, was isolated previously. Southern blot analysis using human cDNA probes detected cross-hybridization with DNA from several organisms, including chicken and quail. The entire coding sequences of chicken and quail KAL cDNAs were determined. A comparison of these cDNAs with the human KAL cDNA reveals an overall identity of 73 and 72%, respectively. This results in 76 and 75% identity at the protein level. The highest conservation was found in the WAP four-disulfide core motif and in two of the four fibronectin type III repeats reported in the human protein. These results further support the hypothesis that the KAL protein is an extracellular matrix component with anti-protease and adhesion functions.     

Creutzfeldt-Jakob disease: neurophysiologic visual impairments

OBJECTIVE: The predictive value of electrophysiologic visual testing in Creutzfeldt-Jakob disease (CJD) was investigated, and the retinal pathologic findings in three cases are reported. BACKGROUND: The fatal prognosis of CJD, its transmissibility, and the lack of treatment make early diagnosis essential in averting human-to-human transmission. Electroretinogram and visual evoked potentials have been studied in few cases of CJD. METHODS: A visual electrophysiologic examination was performed in 41 consecutive patients referred with suspected CJD. The disease had been diagnosed in 24 patients (CJD group; 15 were confirmed neuropathologically and 9 by clinicolaboratory methods in accordance with diagnostic criteria). The remaining 17 patients were diagnosed with other neurologic disorders, and served as a control group. RESULTS: Flash electroretinogram revealed a significant decrease in the amplitude of the B1 wave (<60 microV) and the B/A ratio (<2) in the CJD group compared with those in the control group. Flash visual evoked potentials revealed no significant difference in latency, but amplitude was increased (>10 microV) in the CJD group, especially in patients with myoclonus. CONCLUSIONS: The visual electrophysiologic abnormalities provide an interesting noninvasive diagnostic tool in idiopathic CJD. The B1-wave decrease is closely correlated with the outer plexiform layer abnormalities observed on neuropathologic examination.     

A novel low complexity data demodulation algorithm for pulse position modulation

In this paper, a low complexity data demodulation algorithm is proposed that requires time of arrival information of the received signal exclusively. As an application example, the algorithm is applied to an ultra-wideband impulse radio communication system with pulse position modulation. The algorithm is insensitive to a common time delay for all pulses, that means, it does not require an accurate synchronization between the transmitter and the receiver. For the performance estimation, only a symbol synchronization is assumed, i.e., that there is a priori knowledge which pulse marks the beginning of a received data symbol. The performance of the proposed algorithm is evaluated for straightforward time of arrivals estimators, such as a maximum detector or a threshold detector. It is shown that the proposed algorithm outperforms a least squares algorithm in all considered scenarios. In particular, an increased robustness against additive white Gaussian noise, impulse like noise, and multiuser interference is demonstrated as well as an improved performance for multipath propagation channels.     

Biobased thermosets from the free‐radical copolymerization of conjugated linseed oil

New polymeric thermosets were prepared through the bulk free‐radical copolymerization of 100% conjugated linseed oil, acrylonitrile, and divinylbenzene. Under the appropriate reaction conditions and with the appropriate curing sequence, 61–96 wt % of the oil was incorporated into the crosslinked thermosets. The resulting yellow, transparent thermosets varied from being soft and flexible to being hard and brittle. Dynamic mechanical analysis and thermogravimetric analysis showed that these thermosets had good mechanical properties and thermal stability. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 979–985, 2007     

Relationship Between Interfacial Water Layer Adhesion Loss of Silicon/Glass Fiber-Epoxy Systems: A Quantitative Study

Water at the polymer/substrate interface is often the major cause of adhesion loss in coatings, adhesives, and fiber-reinforced polymer composites. This study critically assesses the relationship between the interfacial water layer and the adhesion loss in epoxy/siliceous substrate systems. Both untreated and silane-treated Si substrates and untreated and silane-treated E-glass fibers were used. Thickness of the interfacial water layer was measured on epoxy/Si systems by Fourier transform infrared-multiple total internal reflection (FTIR-MTIR) spectroscopy. Adhesion loss of epoxy/Si systems and epoxy/E-glass fiber composites was measured by peel adhesion and short-beam shear tests, respectively. Little water accumulation at the epoxy/Si substrate interface was observed for silane-treated Si substrates, but about 10 monolayers of water accumulated at the interface between the epoxy and the untreated Si substrate following 100 h of exposure at 24 °C. More than 70% of the initial epoxy/untreated Si system peel strength was lost within 75 h of exposure, compared with 20% loss after 600 h for the silane-treated Si samples. Shear strength loss in composites made with untreated E-glass fiber was nearly twice that of composites fabricated with silane-treated fiber after 6 months of immersion in 60 °C water. Further, the silane-treated composites remained transparent, but the untreated fiber composites became opaque after water exposure. Evidence from FTIR-MTIR spectroscopy, adhesion loss, and visual observation strongly indicated that a water layer at the polymer/substrate interface is mostly responsible for the adhesion loss of epoxy/untreated siliceous substrate systems and epoxy/untreated glass fiber composites and that FTIR-MTIR is a viable technique to reliably and conveniently assess the adhesion loss attributable to water sorption at the interface.     

Feeding rats with liposomes or fish oil differently affects their lipid metabolism

Two n‐3 polyunsaturated fatty acid (PUFA)‐rich diets differing in their chemical and physical forms were given to rats during 2 wk. Liposomes [phospholipids (PL) organized in bilayer structures] made from a natural marine lipid extract or a mixture of fats containing fish oil [similar fatty acids esterified in triacylglycerols (TAG)] were used. The influence of n‐3 PUFA dietary sources on plasma parameters, i.e. TAG, cholesterol and PL concentrations, was investigated. A similar hypotriglyceridemic effect of n‐3 PUFA from liposomes or fish oil was observed. In contrast, feeding rats with liposomes led to different PL and cholesterol patterns. In the plasma of rats fed liposomes, total cholesterol amounts were positively correlated with PL levels. Liposome and fish oil feedings caused a marked increase in the amounts of n‐3 PUFA, which occurred mainly at the expense of n‐6 PUFA. However, the enrichment in n‐3 PUFA in the different plasma lipid classes differed substantially when ingested in the form of fish oil or liposomes. These results were interpreted in terms of different lipid bioavailability and metabolic fate during the digestive steps and in the liver, with the dietary source.     

Reactivity of perovskites on oxidative coupling of methane

Well-defined structures like ABO₃ (A = Ba, Sr, Ca; and B = Ti, Zr) perovskites were prepared by a sol-gel method which permits the formation of a crystalline structure at low-calcination temperatures (700 °C). The perovskite structures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) methods and the carbonate present at the surface was determined by Fourier transform infra-red spectroscopy. Reactivity studies showed that the perovskite structures are stable under oxidative coupling of methane (OCM) conditions. The yield increases followed the sequence Ca < Sr < Ba and Zr < Ti, and a stable BaTiO₃ gives a C₂ yield of 15% at 800 °C.     

About the origins of residual stresses in <Emphasis Type="Italic">in situ</Emphasis> consolidated thermoplastic composite rings

In a context of cost reduction, in situ filament winding of thermoplastic matrix composites becomes an appealing process. As residual stresses could considerably affect the produced part, models were proposed to predict process-induced residual stresses. After developing a validated thermal model of the process, mainly three different aspects are here addressed: the continuous bonding occurring during the process, the effect of the processed layer on the structure, and the effect of the curvature of the mandrel. While stresses coming from the continuous bonding appeared to be negligible, consequent levels of stresses can be achieved due to an iterative compression of the structure by the tow (supposed to be under tension). The mandrel properties and the tow tension profile followed during winding are essential parameters that might induce several different stress states. A comparison between measured and computed end-to-end openings of split rings illustrates the accuracy of the proposed models.     

Prospects of Supercritical Fluids in Realizing Graphene‐Based Functional Materials

Supercritical‐fluids science and technology predate all the approaches that are currently established for graphene production by several decades in advanced materials design. However, it has only recently been proposed as a plausible approach for graphene processing. Since then, supercritical fluids have emerged into contention as an alternative to existing technologies because of their scalability and versatility in processing graphene materials, which include composites, aerogels, and foams. Here, an overview is presented of such materials prepared through supercritical fluids from an advanced materials science standpoint, with a discussion on their fundamental properties and technological applications. The benefits of supercritical‐fluid processing over conventional liquid‐phase processing are presented. The benefits include not only better performances for advanced applications but also environmental issues associated with the synthesis process. Nevertheless, the limitations of supercritical‐fluid processing are also stressed, along with challenges that are still faced toward the achievement of the great expectations from graphene materials.