Activity-composition relations of MnO in MnO-CrO x -CaO-SiO2-containing melts

The MnO activities in (MnO-CrO _x -CaO-SiO₂)-containing melts, which were saturated with the (Mn, Cr)₃O₄ spinel phase, were determined at 1500 °C under an oxygen partial pressure of 10^−8.99 atm. This was done by equilibrating the samples with platinum. The activity of MnO in the melt was then calculated from the activity coefficient of manganese in the resultant Pt-Cr-Mn alloy. Darken’s quadratic formalism for ternary metallic solutions was used to calculate the activity coefficient of manganese in the Pt-Cr-Mn system, in which platinum was considered to be the solvent. It was found that an increase in the concentration of MnO in the melt increases both the MnO activity and the activity coefficient of MnO. For a constant MnO concentration in the (MnO-CrO _x -CaO-SiO₂)-containing melts, the activity of MnO can be increased by increasing the basicity of the melt. In order to obtain high-manganese recoveries from (MnO-CrO _x -CaO-SiO₂)-containing melts into an alloy phase, basic slags in which the activity coefficient of MnO is high should therefore be used.     

Phase Transformations and Grain Growth in β-stabilized TiAl Alloys

Solid-state phase transformations and grain growth of an intermetallic γ-TiAl alloy were investigated in-situ using high-temperature laser scanning confocal microscopy (HTLSCM). During isothermal annealing in the single β-phase region, significant grain coarsening was observed. On cooling beneath the β-transus temperature with different rates, a CCT diagram was evaluated for the initiation of β to α phase transformation and changes in the morphology were observed.     

Development of a Pulsed-Field Differential Mobility Analyzer: A Method for Measuring Shape Parameters for Nonspherical Particles

For a nonspherical particle, a standard differential mobility analyzer (DMA) measurement yields a mobility-equivalent spherical diameter, but provides no information about the degree of sphericity. However, given that the electrical mobility for nonspheres is orientation-dependent, and that orientation can be manipulated using electric fields of varying strength, one can, in principle, extract some type of shape information through a systematic measurement of mobility as a function of particle orientation. Here, we describe the development of a pulsed-field differential mobility analyzer (PFDMA) which enables one to change the peak E-field experienced by the particle to induce orientation, while still maintaining the same time-averaged field strength as a standard DMA experiment. The instrument is validated with polystyrene latex (PSL) spheres with accurately known size, and gold rods with dimensions accurately determined by transmission electron microscopy (TEM). We demonstrate how the instrument can be used for particle separation and extraction of shape information. In particular, we show how one can extract both length and diameter information for rod-like particles. This generic approach can be used to obtain dynamic shape factors or other multivariate dimensional information (e.g., length and diameter).

Copyright 2014 American Association for Aerosol Research     

核素153Sm体素S因子特性的研究

基于体素S因子计算个体化病例的三维剂量是目前核医学研究的一个重要方向.153Sm是目前骨转移治疗常用的核素之一.本文利用EGS4蒙特卡罗程序包构建了基于体素的三维吸收剂量分布模拟程序,计算了不同情况下153Sm的S因子,探讨了介质成分和物理密度对S因子的影响.结果表明:1)不同物理密度对S因子有明显影响;2)在相同物理密度的情况下,不同介质对S因子的影响相对较小.计算结果为基于体素S因子计算核素治疗的三维剂量提供了参考,明确了在不考虑介质和物理密度差异时S因子的误差.     

Determining actual LNAPL plume thickness: review and case study in a fractured aquifer

Determining the thickness of a LNAPL (light non-aqueous phase liquid) hydrocarbon plume in the fractured rock surrounding a borehole is a very important aspect in determining the quantity and degree of contamination of the groundwater and soil, as well as deciding on applicable remediation measures. This review aims to compare some of the field and empirical methods to eventually propose a method of confirming the plausibility of the determined thickness. General insight is supplied relating to the occurrence of groundwater in the Earth’s crust, the basic principles of multiphase flow and the properties of the three fluids of importance, being water, Jet A-1 fuel and air. From the methods applied, the field bail-down method of Hughes et al. and the mathematical approach according to CONCAWE supplied reasonable results, with the Zillox and Muntzer equation providing no rational outcome due to changing water levels from regular bailing of the LNAPL. Furthermore, practically none of these methods have been developed for deep, fractured aquifers. By plotting regular depths to water and fuel on the abscissa axis with free product thickness on the ordinate, the depth to water and depth to fuel linear plots will intersect where the free product thickness equals zero. This indicates the static water level (i.e., the ground water level prior to hydrocarbon contamination) and by subtracting this from the free product depth, a maximum product thickness is obtained.      

6-脱氢姜酚的制取与鉴定

为了获得高纯度的脱氢姜酚,以干姜粉制取的姜油树脂为原料,通过溶剂萃取、硅胶干柱层析和硅胶柱真空层析等分离纯化方法,获得了黄色粉状物,通过紫外可见光谱、红外光谱、核磁共振谱、质谱等测定证实所得粉状黄色粉状物为6-脱氢姜酚,证实了其烯醇互变异构体———6-脱氢姜二酮的存在。     

Production of Monoacylglycerols from Fully Hydrogenated Palm Oil Catalyzed by Hydrotalcite Loaded with K2CO3

This study reports a new method of producing high-purity monoacylglycerols (MAGs) by glycerolysis of fully hydrogenated palm oil (FHPO) catalyzed by hydrotalcite loaded with K₂CO₃ (K₂CO₃/HT). The effects of reaction temperature, reaction time, catalyst (K₂CO₃/HT) loading, and mass ratio of FHPO to glycerol on glycerolysis were investigated. The selected conditions included a reaction temperature of 200°C, K₂CO₃/HT loading at 0.8 wt.% (FHPO mass), a 5:2 mass ratio of FHPO to glycerol, and a reaction time of 2 h. Under these selected conditions, the yield of MAGs in the acylglycerol phase reached 46.8 wt.%. A two-stage molecular distillation was introduced to purify MAGs, and the final MAG product was obtained with a purity of 96.6 wt.% and a recovery of 96.8%. Furthermore, the recycled K₂CO₃/HT was reactivated with restored catalytic efficiency through impregnation, carbonation, and recalcination.