Motion patterns of Nabesna Glacier (Alaska) revealed by interferometric SAR techniques

Nabesna Glacier is one of the longest land-terminus mountain glaciers in North America. However, its flow has never been studied. We derived detailed motion patterns of Nabesna Glacier in winter and spring 1994–1996 from the synthetic aperture radar (SAR) images acquired by the European Remote Sensing satellites (ERS-1 and ERS-2) using interferometric SAR (InSAR) techniques. Special effort was made to assess the accuracy of the motion estimates, and remove data points with high uncertainty from the motion profiles, enabling us to obtain reliable glacier flow patterns along the highly curved main course of Nabesna Glacier. The results, covering 80 km of the 87 km main course of the glacier, were used to delineate four distinctive sections in terms of spatial and temporal variability of the glacier speed: (1) the upper section where glacier flow was apparently random both temporally and spatially presumably due to development of crevasses; (2) the upper-middle section with relatively steady flow around 0.27 to 0.4 m/day; (3) the middle section with a stable pattern of acceleration from 0.27–0.3 m/day to the maximum about 0.67–0.73 m/day, followed by a general deceleration to 0.17–0.33 m/day before reaching (4) the lower section where the glacier motion was generally slow yet highly variable although uncertainty in the estimation is high. Occurrence of the flow maximum, as well as many local maxima and minima at consistent locations over different periods suggests that the valley geometry affect the overall flow pattern. On top of this general trend, many small-scale temporal/spatial variations in the glacier flow patterns were observed along the glacier, especially in the lower sections. On average, the flow speeds were in the range of 0.3 to 0.7 m/day; however this lacks any measurements of summer flow speeds which are expected to be significantly higher.     

Implementation of multipoint connections in an ATM switching network

This paper presents the problems in the implementation of multipoint connections at switching level using the example of an ATM switching network. By choosing the proper routeing mechanism and the appropriate architecture of the switching element, a switching network can gradually be adapted to an increasing share of multipoint traffic. The first section describes the problems with the handling of multipoint connections within a multiple stage connection oriented switching network. In particular this refers to the routeing of the cells through the switching network. Several alternatives on this issue are discussed. Both, the selected approach based on a differentiated self-routeing mechanism and the corresponding cell format are introduced. In the second part of this article several switch architectures are compared in respect of their multipoint capability. It is demonstrated that at present the most promising solution are switching elements based on the principle of central buffering. A single chip solution using this concept is employed in the presented switching network.     

异构无线网络资源管理与切换控制技术

随着通信技术的发展,新型业务逐渐增多,传统的通信网络无法满足各种业务之间巨大的性能需求差异,未来的通信网络逐渐向异构网络进行发展。针对异构网络中资源调配与垂直切换的问题,利用虚拟网络技术与资源虚拟化技术设计了异构网络中的无线资源管理方法,并设计了子网间垂直切换算法。该算法利用层次分析法与熵权法得到各网络参数的综合权值,加权得到各网络的效用值并依此选择最优网络。通过搭建系统平台验证了设计的异构无线网络的有效性,为后续异构无线网络的研究提供了参考。     

Electronic Raman scattering in CuO2 superconductors

Experimental results for the electronic Raman effect in differently doped cuprate superconductors will be presented. We show that the B_2g-symmetry data are generally closely related to ordinary transport and are therefore most likely originating from the carriers, while the response at B_1g symmetry cannot be assigned to a specific type of excitations. In the superconducting state the B_2g pair breaking peaks scale with the transition temperature over a wide doping range. All results consistently suggest a strong anisotropy of the gap and can be modeled by assuming symmetry for the order parameter.     

Preparation of YBa2Cu3O7-x superconducting thick films by the electrophoretic deposition method

YBa₂Cu₃O_7-x thick films have been realised by the Electrophoretic Deposition method (EPD). The influence of several parameters (powder and iodine concentrations in the suspension, applied voltage and deposition time) on the EPD process has been studied by measuring the conductivity of the suspension and the amount of YBa₂Cu₃O_7-x particles deposited on the electrode. Superconducting coatings onto silver substrates have been produced by a multilayer process during different deposition times. The highest critical current density value of these coatings measured by the four-point probe method is about 10³ A/cm² (77 K), in a suitable range for magnetic shielding applications.     

Micromechanics of Tension‐Compression Asymmetry of Polycrystalline Shape‐Memory‐Alloys

The asymmetry associated with martensitic transformations observed in tension/compression experiments of shape‐memory‐alloys (SMAs) is investigated on the basis of a recently suggested micromechanical model. The approach is based on crystallographic theory and utilizes a framework of energy minimization in a finite deformation context. Polycrystalline NiTi under tension demonstrates smaller phase‐transformation start‐strain, differe phase‐transformation stress‐levels and flatter phase‐transformation stress‐strain slopes than that under compression in our numerical simulation. The phase‐transformation start‐stress is followed to have a linear relationship with respect to the temperature within a certain range. These results agree well with experimental results reported in the literature.