Rapid consolidation of powdered materials by induction hot pressing

A rapid hot press system in which the heat is supplied by RF induction to rapidly consolidate thermoelectric materials is described. Use of RF induction heating enables rapid heating and consolidation of powdered materials over a wide temperature range. Such rapid consolidation in nanomaterials is typically performed by spark plasma sintering (SPS) which can be much more expensive. Details of the system design, instrumentation, and performance using a thermoelectric material as an example are reported. The Seebeck coefficient, electrical resistivity, and thermal diffusivity of thermoelectric PbTe material pressed at an optimized temperature and time in this system are shown to agree with material consolidated under typical consolidation parameters.     

A new method of reinforcing graphene nanoplatelets in glass/epoxy composites

This research aims to develop a method for the amalgamation of graphene nanoplatelets in glass/epoxy composites. The poor interface bonding between the fiber and matrix is critical and hinders the full performance of the composites. Glass fabric and epoxy were used as reinforcement and matrix in the composite, respectively. Graphene nanoplatelets were utilized as an additional nano-materials filler for the composites. Glass/graphene/epoxy and glass/epoxy composites were fabricated via vacuum infusion molding. The new method of applying graphene nanoplatelets as secondary reinforcement in the composite was developed based on proper functionalization in the sonication process. The physical, tensile, flexural, and short beam interlaminar properties of fabricated composites were examined to analyze the method's effectiveness. The results showed that density decreased by around 5 %; however, thickness increased by around 34 % after introducing graphene nanoplatelets into the composites. The tensile strength and modulus of the composites declined by approximately 19 %, on the other hand, flexural strength and modulus increased by around 63.3 % and 8.3 %, respectively, after the addition of graphene nanoplatelets into the composites. Moreover, interlaminar shear strength of the composite was enhanced by approximately 50 %.     

Resilience Assessment of Water Resources System

The resilience perspective, which emphasizes the integrated, systemic concept of human and nature interactions, is increasingly used as an approach for understanding the dynamic of social-ecological system. As the water resources system (WRS) is a social-ecological system, resilience thinking such as Holling??s adaptive cycle has been adopted as a fundamental unit for understanding the water resources system dynamics in this paper. In the adaptive cycle of WRS, the likelihood shift among different phases largely depends on resilience value; and a quantitative method for estimating the resilience of WRS is proposed. The method is related to the degree of change and characteristics of the WRS, and has been applied to identify the phase of WRS in every city in Zhejiang province, China. The results of resilience assessment have also been discussed in terms of adaptive cycle.     

Application of electron beam for the reduction of PCDD/F emission from municipal solid waste incinerators

The electron-beam technology was applied to reduce the emission of polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) in a flue gas of 1000 m(3)N/h from the municipal solid waste incinerator (MSWI) at a temperature of 200 degrees C. More than 90% decomposition of PCDD/Fs was obtained using an electron accelerator at a dose of 14 kGy. The decomposition was initiated through reactions with OH radicals produced by the irradiation of flue gases, followed by oxidation such as the ring cleavage of the aromatic ring, the dissociation of ether bond, and dechlorination. The cost analysis estimated that the electron-beam system can cut the annualized cost by approximately 50% for the treatment of PCDD/Fs in a pre-dusted MSWI flue gas as compared with a bag-filter system when operating on electricity generated from an incineration. Electron-beam technology is an economically and technologically useful method for reducing PCDD/Fs in an incineration flue gas.     

Development of a homogeneous competitive immunoassay for phosphorylated protein antigen based on the enhanced fluorescence resonance energy transfer technology

We describe a homogeneous competitive immunoassay for a phosphorylated protein antigen. The assay takes advantage of the enhanced fluorescence resonance energy transfer (FRET) technology, which has a unique characteristic that the FRET signal is increased by the specific interaction of two fluorolabeled leucine zippers. We chose extracellular signal-regulated kinase (ERK) as a model antigen and constructed two molecular probes in which either anti-phosphorylation site antibody or the antigen peptide was chemically conjugated to the enhanced FRET probes. While these molecular probes indicated sufficient FRET signal without antigen, they displayed a significant change in the fluorescent spectrum by mixing with phosphorylated antigens. With this competitive enhanced FRET immunoassay, a phosphorylated ERK concentration within the range from 15 nM to 250 nM could be determined. Because the assay is very simple, it would be applied to not only in vitro assay but also in vivo detection of protein phosphorylation.     

Genetically engineered active Qbeta replicase in rabbit reticulocyte cell-free system: a fusion protein of EF-Tu and EF-Ts is functional as the subunit of Qbeta replicase

Qbeta replicase functioning in Escherichia coli is an RNA-dependent RNA polymerase composed of one phage-coded subunit and three host-coded proteins: ribosomal protein S1, and protein elongation factors EF-Tu and EF-Ts. Qbeta replicase lacking ribosomal protein S1 (alpha-less replicase) is capable of replicating some small RNAs. We attempted to create functional alpha-less replicase by co-expression of the mRNAs that code for the subunits of alpha-less replicase in a rabbit reticulocyte cell-free translation system. Replicase activity, however, could not be detected when both EF-Tu and EF-Ts were co-expressed with the phage-coded subunit. On the other hand, active alpha-less replicase was obtained when an EF-Ts-EF-Tu fusion protein was co-expressed with the phage-coded subunit. Consequently, we succeeded in generating genetically engineered active alpha-less Qbeta replicase which functions in a eukaryotic cell-free system.     

Determination of the solar calibration constant for a sun-sky radiometer: proposal of an in-situ procedure

A new procedure is presented for determining in situ the solar calibration constant, i.e., the Sun-sky radiometer counts for a direct normal solar flux extrapolated to the top of the atmosphere. The method makes use of a modified version of the Langley plot based on the use of an inversion code of column-integrated aerosol size distribution, and it is ordinarily applied to calibrate Prede Sun-sky radiometers. To analyze how such an in situ method can work accurately, the technique has been applied to a five-month dataset obtained from measurements taken in Rome, Italy, by a Prede Sun-sky radiometer from 22 April to 5 November 2001. The precision of the in situ method has been estimated to within 1-2.5%, depending on the wavelength.     

Hydrothermal synthesis of surface-modified iron oxide nanoparticles

We synthesized surface-modified iron oxide nanoparticles in aqueous phase by heating an aqueous solution of iron sulfate (FeSO₄) at 473 K with a small amount of either n-decanoic acid (C₉H₁₉COOH) or n-decylamine (C₁₀H₂₁NH₂), which is not miscible with water at room temperature. Transmission electron microscopy showed that the addition of n-decanoic acid or decylamine changed the shape of the obtained nanoparticles. X-ray diffraction spectra revealed that the synthesized nanoparticles were in α-Fe₂O₃ or Fe₃O₄ phase while Fourier transform infrared spectroscopy and thermogravimetry indicated the existence of an organic layer on the surface of the nanoparticles. In the synthetic condition, decreased dielectric constant of water at higher temperature increased the solubility of n-decanoic acid or n-decylamine in water to promote the reaction between the surface of iron oxide nanoparticles and the organic reagents. After the synthesis, the used organic modifiers separated from the aqueous phase at room temperature, which may help the environmentally benign synthesis of surface-modified metal oxide nanoparticles.     

Preparation of Au-loaded niobate nanosheets and their plasmon-driven photochemical reaction

Niobate nanosheets prepared by exfoliation of layered hexaniobate K₄Nb₆O₁₇ were sequentially decorated with two noble metal nanoparticles, gold and silver, through two-step photochemical reactions. First, cationic bis(ethylenediamine)gold(III) ions were electrostatically adsorbed on the anionic niobate nanosheets, and reduced to gold nanoparticles by UV excitation of the photocatalytically active niobate nanosheets. Then, the surface plasmon band of the photodeposited gold nanoparticles was excited with visible light, by which the silver cations introduced to the system together with citrate anions were reduced to silver nanoparticles. Spectroscopic and transmission electron microscopic observations indicated the formation of morphologically different silver nanoparticles, for example nanorods and core-shell particles.