Effect of specimen size and loading conditions on spalling of concrete

Different qualities of concrete have been fire tested using different geometries of the specimens as well as different load levels and load configurations. The main objective with the study was to examine a test methodology consisting of a full‐scale test and different small scale‐tests for determining the probability of spalling and the amount of spalling of fire exposed concrete structures. A reference specimen was defined as a one‐sided fire exposed slab with the dimensions 1800 × 1200 mm² giving an exposed area of 1500 × 1200 mm². A number of concrete qualities with different probabilities for spalling, were tested using the reference specimen. These tests showed that the reference specimens worked well giving the expected test results. Small specimens were manufactured in different shapes with the same concrete as the one used in the reference tests. These small specimens were tested either at the same time as the reference specimens in the large furnace or afterwards on a small‐scale furnace where the fire exposed surface was 450 × 360 mm². The test results clearly show the increased probability and the increased amount of spalling by using external compressive loading. The results also show that by using pre‐stress through bars or wires the load can be lost due to heating of the bars/wires which results in a decreased amount of spalling. The boundary of the specimen also affects the amount of spalling. The spalling around the edges was in all tests less than the spalling on the central parts of the exposed area. It could also be noted that the spalling did not pass completely through any of the specimens. The reason for this is probably that the water/vapour could migrate out from the unexposed surface of the specimen. Copyright © 2006 John Wiley & Sons, Ltd.     

Comparative Judgments as an Alternative to Ratings: Identifying the Scale Origin.

Although comparative judgment methods have a number of distinct advantages over ratings, they share one common problem: On the basis of comparative judgments, it is not possible to recover the origin of item evaluations. One item may be judged more positively than another, but this result does not allow any conclusions about whether either of the items are attractive or unattractive. This article discusses the implications of this limitation for the interpretation of individual differences in comparative judgments. It also presents 3 different methods that may allow determination of the scale origin using a nested model comparison approach. An application illustrates the proposed approach as well as the benefits of determining the scale origin in understanding value judgments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A new environmental friendly method for the preparation of sugar acids via catalytic oxidation on gold catalysts

A novel and efficient way of producing of aldonic acids is reported. The selective catalytic oxidation of monosaccharides (arabinose, ribose, xylose, lyxose, mannose, rhamnose, glucose, galactose, N-acetyl-glucosamine) and disaccharides (lactose, maltose, cellobiose, melibiose) on Au, Pd and Pt catalysts was investigated. By using the gold catalyst, a total selectivity with respect to aldonic acids and a high catalytic activity for all investigated sugars was found. The reaction conditions for the production of maltobionic and lactobionic acids via oxidation on gold catalysts were optimised. A high long-term stability of two different gold catalysts for the oxidation of maltose and lactose, respectively, was found.     

Long-term stability of an Au/Al2O3 catalyst prepared by incipient wetness in continuous-flow glucose oxidation

A 0.3% Au/Al₂O₃ catalyst prepared by the incipient wetness (IW) method was investigated in the continuous-flow liquid-phase glucose oxidation. Therefore, a continuous stirred tank reactor (CSTR) system equipped with an ultrasonic separator was used. The continuous-flow glucose oxidation was carried out at 40 °C, pH 9 and 1 bar oxygen partial pressure. Residence time and glucose concentration were varied. The IW gold catalyst showed very high activity and selectivity to gluconic acid within its 110 days of operation and, thus, an excellent long-term stability. Even after severe microbial contaminations of the catalyst, its activity could be completely restored by in situ regeneration with 2-propanol.     

Characterization and tests of planar Co3O4 model catalysts prepared by chemical vapor deposition

The chemical vapor deposition method was used to deposit thin films of cobalt oxide starting with cobalt (II) acetylacetonate and oxygen. The deposition process was investigated and the obtained films were identified as a cubic spinel-type polycrystalline Co₃O₄ with a crystallite size of 30–40 nm. The coating was carbon-free and the surface oxygen concentration was measured to be 66 at.% with AES analysis. Smooth and highly uniform thin films were deposited on planar stainless steel substrates and subjected to TPR and catalysis tests that show positive correlation. The apparent activation energy of Co₃O₄ reduction to CoO was measured to be (33±5) kJ/mol. The catalytic activity of Co₃O₄ was investigated toward the conversion of both propane and ethanol to carbon dioxide. Though the catalytic action was registered at the same temperature, the deactivation process was seen to be different. The catalytic conversion of ethanol induces a fast deactivation process, which was linked to its high ability to reduce Co₃O₄.     

Influence of the preparation conditions on the properties of gold catalysts for the oxidation of glucose

In this work, two deposition–precipitation methods for the preparation of gold catalysts for glucose oxidation were investigated. Thus far, gold colloids immobilized on carbon have been used for catalytic glucose oxidation, but the long-term stability of these systems was not sufficient. To improve the long-term stability we used the deposition–precipitation methods using NaOH (DP NaOH) or urea (DP urea) as precipitation agents as they were described by Haruta and Dekkers, respectively, using alumina as a support material. With these methods, it was possible to prepare highly active and selective catalysts which showed an excellent long-term stability. DP urea was found to be the preferred method, because in contrast to DP NaOH, no losses of gold occurred during the preparation, and it was possible to adjust various gold contents up to 10 wt% Au.     

PDQ: Parallel Distance Queries for deformable meshes

This paper presents a new algorithm to efficiently maintain Bounding-Volume Hierarchies (BVHs) for fast distance queries with deformable polygon meshes using multi-core architectures. The method involves inflating the bounding volumes in an efficient manner to guarantee the enclosure of the deformable model within the BVH at all times. This is done at low additional computation and memory cost without significantly degrading the quality of the BVH and also in a fashion that allows a simple parallel implementation. Additionally, to facilitate fast queries specifically for deforming meshes, we propose a novel algorithm for the bottom-up construction of BVHs that results in much faster distance queries.     

Effect of Powder Processing and Sintering Conditions on the Microstructural,Thermal, and Mechanical Properties of Reticulated Zinc Oxide Ceramic Foams

Ceramic foams are made of zinc oxide using different amounts of Sb₂O₃ and Bi₂O₃ as sintering aids. The effect of a ball milling processing of the starting powders and the sintering temperature on the microstructure and the properties of the ZnO foams is investigated. The focus is set on the evolution of the secondary phases formed within the microstructure of ZnO. A determining effect is identified in the amount of an Al₂O₃ impurity which is introduced by abrasion of the milling vessels during ball milling. Alumina is partially dissolved in a spinel α–Zn₇Sb₂O₁₂ secondary phase which is stabilized by a reduction of the unit cell volume. Remaining Al₂O₃ is incorporated into zinc oxide under formation of a defect wurtzite phase. The phase evolution is a complex function of the content of sintering aids, the Al₂O₃ impurity level and the sintering temperature. The shrinkage during sintering and the porosity evolution are correlated to the phase composition within the ZnO material. The thermal conductivity and the compressive strength of the foams are determined, normalized with respect to their porosity, and correlated to the microstructure and phase composition of the ZnO strut material.