Investigation the correlation between chemical structure and swelling,thermal and flocculation properties of carboxymethylcellulose hydrogels

Hydrophilic polymer networks (hydrogels) based on sodium carboxymethylcellulose (NaCMC) and polycarboxylic acids (oxalic, succinic, citric and adipic) as cross-linking agents are synthesized by esterification reaction; one series of NaCMC hydrogels cross-linked with citric acid is prepared with acrylamide and acrylic acid (Aam/Aac) copolymers using the design of semi-interpenetrating polymer networks (semi-IPN), in order to increase their potential application for flocculation purposes. The Infrared spectroscopy (FTIR) of hydrogels confirms the esterification reaction between NaCMC and cross-linking agents. Results of swelling measurements show that citric acid in the amount of 15 wt% gives the hydrogels with the best absorption capacity. The results of Differential scanning calorimetry (DSC) and Thermal gravimetric analysis (TGA) show no significant difference in thermal properties of neat and semi-interpenetrating NaCMC hydrogels. The amorphous nature of hydrogels is confirmed by X-ray diffraction analysis (XRD). The results of flocculation study show that combination of NaCMC network and Aam/Aac copolymer with initial mass ratio of 10/90 creates a theoretical platform for the production of flocculant which could show high efficacy in purifying of water dominated by positively charged particles.     

Novel strategy for encapsulation and targeted delivery of poorly water-soluble active substances

Carriers for targeted delivery and controlled release of poorly water-soluble active substances (PWSAS) are facing three challenges: (a) the encapsulation issues, (b) limitations of PWSAS water solubility, and (c) burst drug release which can be pharmacologically dangerous and economically inefficient. The present study brings a novel strategy for encapsulation and controlled release of PWSAS—caffeine in concentrations which are higher than its maximal water solubility without the possibility of burst effect. The modification of hydrophilic carrier based on poly(methacylic acid) was done using casein and liposomes. To further increase the maximal caffeine loading inside the carrier nicotinamide was used. The release study of the encapsulated PWSAS was elaborated with respect to morphology of the carriers and interactions that could be established between its structural components. The carriers swelling and the release of caffeine and nicotinamide were also investigated depending on caffeine concentration, the presence of different liposomal formulations and the volume ratio of liposomal formulation, in three media with different pH simulating the path of the carrier through the human gastrointestinal tract. The synthesized carriers are promising candidates for encapsulation of PWSAS in concentrations which are higher than its maximal water solubility and for the targeted delivery of those dosages.     

The effect of segment length on some properties of thermoplastic poly(ester–siloxane)s

A series of novel thermoplastic elastomers, based on poly(dimethylsiloxane) (PDMS) as the soft segment and poly(butylene terephthalate) (PBT) as the hard segment, were synthesized by catalyzed two‐step, melt transesterification reactions of dimethyl terephthalate and methyl esters of carboxypropyl‐terminated poly(dimethylsiloxane)s (M?_n = 550–2170 g mol^?1) with 1,4‐butanediol. The lengths of both the hard and soft segments were varied while the weight ratio of the hard to soft segments in the reaction mixture was maintained constant (57/43). The molecular structure, composition and molecular weights of the poly(ester–siloxane)s were examined by ¹H NMR spectroscopy. The effectiveness of the incorporation of the methyl‐ester‐terminated poly(dimethylsiloxane)s into the copolymer chains was verified by chloroform extraction. The effect of the segment length on the transition temperatures (T_m and T_g) and the thermal and thermo‐oxidative degradation stability, as well as the degree of crystallinity and hardness properties of the synthesized TPESs, were studied. Copyright © 2003 Society of Chemical Industry     

Fundamentals of modelling concurrency using discrete relational structures

We consider relational structures such that is a set and are two binary relations on . For a number of different classes of structures we show that any structure can be represented as the intersection of its maximal extensions. Such a property – called extension completeness – can be seen as a generalisation of Szpilrajn's theorem which states that each partial order is the intersection of its total order extensions. When can be interpreted as causality and as ‘weak’ causality we obtain a model of concurrent histories generalising that based on causal partial orders. Received 1 February 1994 / 6 May 1996     

Effect of proton radiation on the kinetics of phosphorescence decay in the ceramic material ZnS-Cu

The results of studying the dose dependences of the decay kinetics of phosphorescence excited by X-ray radiation in luminescent ZnS-Cu ceramic material before and after irradiation with 50-MeV protons are considered. An anomalous variation in the exponent of the hyperbolic phosphorescence curves was observed experimentally as the accumulated light sum increased. It is found from an analysis of the data obtained that two processes are involved in the decay: one of these is monomolecular and corresponds to the first-order kinetics; the other is bimolecular and corresponds to the second-order kinetics. Transitions of charge carriers delocalized from traps occur at the nonradiative-recombination centers induced by proton radiation. Recombination of these charge carriers at the emission centers in the course of decay is described by the second-order kinetics.     

Distribution of scientific productivity: Ambiguities in the assignment of author rank

Methodological implications of four accounting procedures applied in multiple authorship treatment relating to author productivity distribution were investigated. The emphasis was given to the individual author rank and inequality pattern of data. It was found that similar pattern of inequality holds in three of the four analysed cases, in spite of the fact that significant changes were observed on the individual level. By introducing the concept of dual approach a plausible interpretation of that phenomenon was obtained.Dedicated to the memory of Michael J. Moravcsik     

Dual approach to multiple authorship in the study of collaboration/scientific output relationship

This paper presents an empirical study of the relations between scientific output and collaboration performed on two scales: (1) an individual scale, for members of a study model, and (2) a group scale, for three samples varying in the level of productivity. The rank approach was applied in the preparation of the study model resulting in the selection of a set of the most prolific authors. In the course of that process, multiple authorship problem was solved by a dual approach, consisting of normal count and modified straight count procedures. As shown by the analysis of collaborative patterns, either on individual or on group scales, scientific output is highly dependent on the frequency of collaboration among the same authors. Expressed as the collaboration measure, it might serve as an indicator in comparative analyses of scientific productivity in a given field of science.     

Functionalized oligopolysiloxanes by heterogeneously catalyzed equilibration polymerization reactions

Summary A new general procedure for preparation of functionalized oligopolysiloxanes of predetermined molecular weight is described. It utilizes heterogeneously catalyzed siloxane equilibration polymerization reactions which do not require troublesome and sometimes difficult post-preparative work-up procedures usually encountered with the well known homogeneously catalyzed corresponding reactions. The method is described using as example the preparation of , -telechelic vinyldimethylsiloxy-oligopolydimethylsiloxanes from octamethylcyclotetrasiloxane and 1,3-divinyltetramethyldisiloxane, but reference to the preparations of trimethylsiloxy-, dimethylsiloxy-and carboxypropyldimethylsiloxyoligopolydimethylsiloxanes, oligopolymethylhydridosiloxanes or their copolymers is also made.     

A contribution to the UV degradation of polyurethanes

The effects of the nature of the polyols used in polyurethane (PUR) synthesis on the structural transformations after ageing by UV irradiation has been studied. The investigations were performed on PUR prepared from polyester and polyether diol oligomers. The characterization of the samples before and after ageing in view of the structural changes, which influence the course of the photooxidative degradation and photocrosslinking as well as in view of changes of mechanical properties has been done. Comparative investigations were performed by spectroscopic and viscometric measurements. The results show pronounced heterogeneity of the degradative reactions, including the existence of crosslinking processes and producing thus very inhomogeneous polymeric material. The course and the intensity of photooxidative degradation of PUR differ together with changes of mechanical properties depending whether polyester or polyether polyol have been used. The processes of photooxidative degradation is less expressed in polyesterurethane then in polyurethane based on polyether, under the same conditions of experiments. Different structures of polyester diols caused the various ageing behaviour of PUR too.     

Distortion Minimization: A Framework for the Design of Plane Geometric Anamorphosis

Anamorphosis, as a drawing, represents shapes on a surface such that they appear in their natural form only under specific viewing conditions. Although anamorphoses are mainly studied in a historical context, they are currently experiencing a revival. Plane geometric anamorphoses are a specific sub-type of anamorphic drawings. Some practical problems may arise during the design and realization of plane geometric anamorphosis causing the 3D illusionistic effect to be impaired. The aim of this paper is to identify and analyze these problems. In the paper we use parametric analysis to quantify the distortion that may appear because the point of view is offset from the preferred point of view, and to simulate the deviations that can appear because of the errors in onsite realization. The analysis leads to a framework for the design of plane geometric anamorphosis that minimizes the impairment of the anamorphic illusion.