E-beam lithography of computer generated holograms using a fully vectorial 3D beam propagation method

A fully vectorial 3D beam propagation method (BPM) has been applied to obtain a required pattern of computer generated hologram (CGH) with a variable profile of four phase levels. The computer reconstruction of the CGH image having one and two focal spots was performed by application of the fully vectorial 3D BPM method. After transferring the CGH by EBL technique an adequate phase profile was obtained. Inter-level parameter method was developed to obtain the estimated an electron beam dose required for the even topographical patterning. Using this method, an EBL exposure dose determined to achieve the required relief amplitude of 1.29 μm was 43 μC/cm². The manufactured holograms showed that the overall proposed production process, from the 3D BPM computer simulation to e-beam lithography, can be used to obtain good quality product with reasonable time and computational resources.     

Monte Carlo simulation of 2D TASER

A possibility to develop the so called TASER (Terahertz-Amplification-by-the-Stimulated-Emission-of- Radiation) by using two-dimensional (2D) electron transport in quantum well (QW) structures is investigated by Monte Carlo simulation of the optical-phonon-emission assisted transit-time resonance (OPTTR) of 2D electrons in momentum space under the low lattice temperature. A considerable extension of the frequency region for THz radiation generation (upto 5 times) when going from 3D- to 2D-case is predicted.     

Multivariate analysis of a biologically activated carbon (BAC) system and its efficiency for removing PAHs and aliphatic hydrocarbons from wastewater polluted with petroleum products

The efficiency of a biologically activated carbon system for treating wastewater polluted with petroleum products was examined and the effects of process parameters on its efficacy were evaluated. In each experiment 17 alkylated and 19 non-alkylated polycyclic aromatic hydrocarbons (PAHs) and total petroleum hydrocarbons (TPHs, C₁₀–C₄₀) were extracted using semipermeable membrane devices from wastewater before and after treatment. The acquired data during experiments were analyzed using principal component analysis (PCA). The treatment system robustly removed dissolved PAHs across the studied ranges of the process parameters, providing overall removal efficiencies of 96.9–99.7% for the sum of 36 PAHs. However, the major contributor to their removal was sorption rather than biodegradation, and despite the general efficiency of the process there was up to a 9-fold range in the sums of quantified PAHs in the effluents between experiments. Combinations of long process contact time (24 h) with high temperature (24 °C) and moderate oxygen concentration (6–7 mg O₂ L⁻¹) resulted in good removal of bioavailable PAHs. The removal of TPHs was more dependent on biological activities during the wastewater treatment, and consequently more dependent on the process parameters. In addition, small but significant proportions of PAHs were volatilized and released during the wastewater treatment.     

Free-carrier grating due to the optical phonon emission in InP n + nn + structures

Electron transport in 5 μm long InP n ⁺ nn ⁺ structure with the n-region doping of 10¹⁵cm⁻³ is theoretically investigated by the Monte Carlo Particle (MCP) technique at low lattice temperature (T = 10 K), when dominating scattering mechanism is the optical phonon emission. It is shown that at the constant bias a free-carrier grating (FCG) can be formed inside the n-region. The simple model of FCG formation is proposed and verified by MCP simulation of electron transport and noise in the considered InP structure.     

UV-NIL replication of microlens arrays on flexible fluoropolymer substrates

Microsystem Technologies - This paper describes application of UV-NIL technique for the fabrication of hexagonal OrmoComp microlens arrays on flexible fluoropolymer substrates having exceptional...     

Evaluation of ischemic injury of the cardiac tissue by using the principal component analysis of an epicardial electrogram

Monitoring and control of the heart tissue viability is of crucial importance during heart surgery operations. In most cases the heart tissue suffers from an ischemic injury that causes a decrease in the velocity of electrical excitation propagation in it and influences the shape of the excitation wave front that spreads over the injured area. It is reflected in a more complex shape of the registered epicardial electrogram as compared to normal. A method for quantitative evaluation of the complexity of the shape of the epicardial electrogram based on the principal component analysis is here proposed for evaluation of the ischemic injury of the cardiac tissue. A minimal, yet sufficient, number of the principal components (the optimal basis functions) for truncated expansion of the epicardial electrogram signals could be used as an estimate of signal complexity. The method for determination of such a minimal, yet sufficient, number of principal components were developed by using epicardial electrograms registered during in situ experiments on dogs in which local ischemia was evoked by ligation of a coronary vessel.