Failure mode transition and energy dissipation in naturally occurring composites

The microstructural aspects of compressive inelastic deformation in balsa wood are investigated with emphasis on the failure mode transition and its effects on energy dissipation characteristics. The architectural features as well as the composite character of cell wall ultrastructure are discussed in a framework to understand the complex interrelationship between microstructure and macroscopic behavior in this extremely lightweight cellular biocomposite. Based on this discussion and experimental results, it is concluded that the biomimetic approach may prove to be a viable strategy in designing composite structures with high specific energy absorption capacity.     

Replacement of beef fat in Frankfurters by interesterified palm,cottonseed and olive oils

Three interesterified vegetable oils (IVOs) prepared from palm, cottonseed, and olive oil, respectively, have been studied for application to Frankfurters. Beef fat (10%) was replaced by one of the IVOs at 20, 60 or 100%. Fatty acid composition of the lipid fraction in the Frankfurters and saturated/unsaturated ratios were established for all batches. We found that total or partial replacement of beef fat by IVOs did not lead to significant changes in appearance, colour, texture, flavour or sensory score. We conclude that IVOs may be successfully applied as beef fat substitutes in Frankfurters.     

Face relighting using discriminative 2D spherical spaces for face recognition

As part of the face recognition task in a robust security system, we propose a novel approach for the illumination recovery of faces with cast shadows and specularities. Given a single 2D face image, we relight the face object by extracting the nine spherical harmonic bases and the face spherical illumination coefficients by using the face spherical spaces properties. First, an illumination training database is generated by computing the properties of the spherical spaces out of face albedo and normal values estimated from 2D training images. The training database is then discriminately divided into two directions in terms of the illumination quality and light direction of each image. Based on the generated multi-level illumination discriminative training space, we analyze the target face pixels and compare them with the appropriate training subspace using pre-generated tiles. When designing the framework, practical real-time processing speed and small image size were considered. In contrast to other approaches, our technique requires neither 3D face models nor restricted illumination conditions for the training process. Furthermore, the proposed approach uses one single face image to estimate the face albedo and face spherical spaces. In this work, we also provide the results of a series of experiments performed on publicly available databases to show the significant improvements in the face recognition rates.     

Production of NiO,NiO/Ag,NiO/Au,and NiO/Pt hollow spheres by using block copolymer stabilized microspheres as a template

Hollow spheres of nickel oxide (NiO) and silver, gold, and platinum nanoparticle loaded NiO composites were successfully produced by using polystyrene (PS) latexes as hard template. Due to the presence of tertiary amine based diblock copolymer stabilizer on the surface of PS, the tertiary amine functional groups provided homogene deposition of nickel hydroxide, and then the precursor NiO salt production on the surface of PS latexes with a controlled precipitation technique. Then, NiO and NiO/metal NP hollow spheres were produced by calcination at 600 °C. Thermogravimetric analysis indicated that the amounts of NiO and NiO-composite after calcination were in the range of 21.1–29.7 wt%. The diameters of metal oxide spheres were in the range of 2.0–2.7 μm and the shell thickness were in the range of 250–350 nm. These structures had very low densities due to their porous and hollow structures and had outer layers with highly rough surfaces due to formation of nanosheets, which may offer important advantages for catalysis studies.     

Effect of CR and FT-paraffin versus SBS modification in terms of conventional and rheological properties

In this study, the rheological and conventional properties of binders prepared with crumb rubber (CR) and FT-paraffin were compared to styrene-butadiene-styrene (SBS)-modified binders’ properties. The objective of this study was to determine which modified binders in different combinations of the CR and the FT-paraffin exhibited better performance than the SBS-modified binders, in terms of conventional and rheological properties. Results showed that the additives exhibited different performances for different types of tests. Many of the combinations including the common usage of the CR and the FT-paraffin performed better at high temperature than the SBS modification. Overall, the test results show that the binders prepared by 6% CR with 3 and 4% FT-paraffin and those prepared with 8% CR with 3% FT-paraffin were better binders than the 4% SBS-modified binder, in terms of low and high temperature properties.     

Experimental investigation on flow improvement in compressor cascades

There is no general rule in the literature to help choose a correct flow control device for any given case of turbomachinery applications. This suggests individual optimization of flow control devices for each specific case. The objective of this study is to prove experimentally the benefits of passive control methods in improving the compressor performance. This allows to reduce the fuel consumption, leading to energy saving and reduction of atmospheric pollution. Two features have been controlled in this study: flow separation over the blade surfaces and the secondary flow over the cascade endwalls. Vortex generator ribs are tested on the blade suction side for flow reattachment on the blade surfaces, and low‐profile vortex generators are tested on the side walls of the compressor cascade against secondary flow losses. Different vortex generator designs are compared for total pressure recovery, flow turning, boundary layer characteristics, and pressure distributions over the endwalls. Copyright © 2016 John Wiley & Sons, Ltd.     

Quasistatic TEM characteristics of overlayed supported asymmetric coplanar waveguides

CAD-oriented analytic formulas are presented for calculating the quasistatic TEM parameters of the overlayed supported asymmetric coplanar waveguides (OSACPW). The effect of the thicknesses and the dielectric constants of the overlaying and supporting materials on the quasistatic parameters has been investigated by using the expressions derived by the conformal mapping techniques. Comparisons have also been made between this article's results and the results available in the literature for the conventional coplanar waveguide (CPW) and the asymmetric coplanar waveguide (ACPW). It has been shown that the present formulas can also be used for calculating the quasistatic TEM parameters of the line structures such as the open, the open supported, and the overlayed supported CPW or ACPW. © 1996 John Wiley & Sons, Inc.