Long-term sensor measurements of lung deposited surface area of particulate matter emitted from local vehicular and residential wood combustion sources

Abstract

Lung deposited surface area (LDSA) is a relatively new metric that has been argued to be more accurate at predicting health effects from aerosol exposure. For typical atmospheric aerosol, the LDSA concentration depends mainly on the concentration of ultrafine particles (e.g. vehicular exhaust emissions and residential wood combustion) and therefore optical methods cannot be used to measure and quantify it. The objective of this study was to investigate and describe typical characteristics of LDSA under different urban environments and evaluate how a diffusion charging-based Pegasor AQ Urban sensor (Pegasor Ltd., Finland) can be used as an alternative to optical sensors when assessing local combustion emissions and respective LDSA concentrations. Long-term (12?months) sensor measurements of LDSA were carried out at three distinctly different measurement sites (four sensor nodes) in the Helsinki metropolitan area, Finland. The sites were affected mainly by vehicular exhaust emission (street canyon and urban background stations) and by residential wood combustion (two detached housing area stations). The results showed that the accuracy of the AQ Urban was good (R² = 0.90) for the measurement of LDSA when compared to differential mobility particle sizer. The mean concentrations of LDSA were more than twice as high at the street canyon (mean 22 µm² cm^?3) site when compared to the urban background site (mean 9.4 µm² cm^?3). In the detached housing area, the mean concentrations were 12 µm² cm^?3, and wood combustion typically caused high LDSA peaks in the evenings. High correlations and similar diurnal cycles were observed for the LDSA and black carbon at street canyon and urban background stations. The utilization of a small-scale sensor network (four nodes) showed that the cross-station variability in hourly LDSA concentrations was significant in every site, even within the same detached housing area (distance between the two sites ～670?m).     

Adaptive cell division for ray tracing

In ray tracing the two most commonly used data structures are the octree and uniform cell division. The octree structure allows efficient adaptive subdivision of space, while taking care of the spatial coherence of the objects in it; however, the tree structure locating the next node in the path of a ray is complex and time consuming. The cell structure, on the other hand, can be stored in a three-dimensional array, and each cell can be efficiently accessed by specifying three indices. However, such a uniform cell division does not take care of object coherence. The proposed data structure combines the positive features of the above data structures while minimising their disadvantages. The entire object space is implicitly assumed to be a three-dimensional grid of cells. Initially, the entire object space is a single voxel which later undergoes “adaptive cell division.” But, unlike in the octree structure, where each voxel is divided exactly at the middle of each dimension, in adaptive cell division, each voxel is divided at the nearest cell boundary. The result is that each voxel contains an integral number of cells along each axis. Corresponding to the implicit cell division we maintain a three-dimensional array, with each array element containing the voxel number which is used to index into the voxel array. The voxel array is used to store information about the structure of each voxel, in particular, the objects in each voxel. While a ray moves from one voxel to another we always keep track of the cell through which the ray is currently passing. Since only arrays are involved in accessing the next voxel in the path of the ray, the operation is very efficient.     

适合消费电子产品的电流转换逻辑技术

消费电子和通信产业正见证着I／O解决方案从并行到高速串行的转变：能够降低成本、简化设计，并具备可延展性，满足全新带宽的要求。这类接口I／O技术的市场潜力巨大，包括移动电话、DVD-RW和高清晰度LCD电视机，而低功耗、低电磁干扰(EMI)和高数据吞吐量在这些应用中极为重要。因此，业界一直致力于设计和开发这些串行I／O，以低功耗提供高速的数据速     

Nano-octopus: a new form of branching carbon nanofiber

A new multibranched octopus-type structure of carbon nanofibers is synthesized from a natural precursor, camphor, by a thermal chemical vapor deposition technique. An alloy of Cu:Ni catalyst is prepared by electrochemically coating nickel on a copper sheet, with nickel sulfate as an electrolyte, and heating that nickel-coated copper sheet to a higher temperature. Deposition of carbon on these substrates leads to the formation of a branched nanostructure in the temperature range of 923 K to 1023 K. The fiber diameter increases from 30 nm to 250 nm with increasing pyrolysis temperature. Detailed morphology and the internal structure of these fibers are studied by scanning and transmission electron microscopy.     

Handover scheme for mobile cellular communication systems

A new scheme for minimising handover failure probability in mobile cellular communication systems, by exchanging channels between two mobiles moving in opposite directions across the endeavour area of adjacent cells is presented. The performance evaluation of the new scheme is carried out by computer simulation of a two cell model     

Analysis of lipid classes by solid-phase extraction and high-performance size-exclusion chromatography

An improved method to analyze lipid classes of edible oils and fats by solid-phase extraction (SPE) and high-performance size-exclusion chromatography (HPSEC) is presented. A mixture of lipid standards was fractionated by the solid-phase extraction procedure (NH₂ phase) into polar and nonpolar fractions; these were then submitted to analysis by HPSEC. The size-exclusion chromatographic columns were three styrene/divinylbenzene columns with pore sizes of 100 Å and 50 Å. Light-scattering was used for the detection system, and the parameters of the detector were optimized to minimize the difference between the responses of the compounds studied. With this procedure it was possible to separate the following lipid classes: triacylglycerols, diacylglycerols, monoacylglycerols and free fatty acids, sterols, sterol esters, tocopherols and carotenoids. Quantitative analysis was studied for a light-scattering detector with several lipid standards of different molecular weights and unsaturation levels.     

Telecommunications: at least a phone in every village

India is home to more than 850 million people, but to very few telephones. For every thousand inhabitants, it has only about eight phones, versus an average of 100 in the developing world, and 600 in developed countries. Here, the author describes how liberalization, in short, while forcing Indian manufacturers to compete against multinationals with state-of-the-art technologies, is opening up opportunities in improving this situation. Indian companies will continue working with the multinationals on joint development, not only as a way of leap-frogging into the state of the art, but to bring the country up to world standards in the availability and quality of its telecommunications     

Mapping surface temperature in large lakes with MODIS data

Satellite sensor MODIS on two platforms can produce Sea Surface Temperature over certain regions about three to four times per day. Our objective was to test if the MODIS SST product can be applied for lakes whose surface areas are large enough to be observed at the MODIS spatial resolution and to compare the satellite-derived lake surface temperatures with in situ measurements. Surface temperatures for Lakes Vänern and Vättern in Sweden, two of the largest European lakes, are extracted from the MODIS/Terra images for period 2001-2003. The results are analyzed on different quality levels, as all MODIS L2 products are equipped with an additional quality flag. We present temperature development over 2001-2003, and show the capability of the MODIS SST product to couple the known thermodynamical features in the lakes under study, where temperature varies greatly with space and time. These results can complement lake monitoring programs anywhere.