SEQUENTIAL LOOP CLOSING IDENTIFICATION OF MULTIVARIABLE PROCESSES USING THE BIASED RELAY FEEDBACK METHOD

Each controller in multiloop control systems for multivariable processes can be tuned sequentially with the ultimate information for the paired input and output while former loops have been closed, and hence, single-input single-output autotuning methods can be applied. In this sequential autotuning for multiloop control systems, several iterations are usually required for better control performances. Especially when pairings are undesirable, the autotuning sequences should be repeated with correct pairings, which result in long field experiments. Here, to avoid this drawback, a simple method to identify process models while loops are being sequentially tuned is proposed. The identified models can be used to correct pairings of multiloop control systems and to improve tuning performances without several field iterations. In addition, they can be used to obtain model-based control systems such as decoupling control systems.     

CONSTRUCTION OF AN ANALYTICAL MODEL OF PAPER DRYING

A theoretical model developed is presented to simulate the paper drying process on a production paper machine. The paper sheet is represented as a matrix of pulpfibres which contains free and bound water, water vapour and air. The model is heavily dependent upon a wide range of physical data including pore size distribution, permeability sorptive characteristics, thermal conductivity, specific heat capacity, density, diffusion coefficients and shrinkage characteristics as well as heat and mass transfer behaviour at the interfaces. Theoretical relationships to describe these parameters in terms of the physical pore structure are developed and compared with published data. The model was compared against actual measurements on the Australian Newsprint Mills Boyer PM3 newsprint machine. The comparison with actual machine moisture content values showed the model prediction of moisture change during drying to cylinder No. 38 on PM3 to be 2% less than actual and 0.1% more than actual by the exit from the drying cylinder. In terms of predicting thermal energy consumption of the paper machine a 91% correlation was obtained.     

Positron-annihilation study of oxygen-deficient YBa2Cu3Ox (6.3

CQ Tang  BR Li  A Chen 《Canadian Metallurgical Quarterly》1990,42(13):8078-8080

Superiority of hyperpolarizing to depolarizing cardioplegia in protection of coronary endothelial function

A sensitive, selective, and specific assay was needed to study the degradation kinetics of taurolidine and its stabilization by polyvinylpyrrolidone (PVP). The purpose of the present study was to evaluate the usefulness of the chromotropic acid method and other formaldehyde or amine derivatization methods. The methods evaluated included formaldehyde derivatization with chromotropic acid, acetylacetone, 4-amino-5-hydrazino-3-mercapto-1,2,4-triazole, semicarbazide hydrochloride, or 2,4-dinitrophenylhydrazine and taurolidine decomposition product derivatization with dansylchloride or 7-chloro-4-nitrobenz-2-oxa-1,3-diazole chloride. Results indicated that the chromotropic acid method provided sufficient selectivity, reproducibility and sensitivity. It was able to quench taurultam decomposition and avoided PVP interference. The method was optimized by performance based selection of reagent lots, appropriate reagent storage and preparation, and controlled derivatization conditions. In conclusion, the optimized chromotropic method was the most appropriate method for quantitating taurolidine decomposition.     

Evaluation of buffer zone effectiveness in mitigating the risks associated with agricultural runoff in Prince Edward Island

To minimize the risk posed by runoff from row crops, Prince Edward Island introduced buffer legislation in 2000. The legislation mandates 10-m and 20-m buffers, respectively, for moderate sloped (i.e. < 5%) and steep sloped (i.e. > 5%) agricultural fields that border streams. Since 2001, Environment Canada has been evaluating the effectiveness of various buffer widths on operational farms in reducing toxicity and contaminant concentrations in runoff. Sample collectors, placed in 44 fields at the field edge (0 m), 10 m and at distances out to 30 m, collected overland flow following rainfall-induced runoff events. Samples were collected within 24 hours of an event and analysed for seven pesticides (endosulfan, chlorothalonil, carbofuran, linuron, metribuzin, metalaxyl, mancozeb), water quality parameters and Daphnia magna toxicity. The 10-m buffer required for moderate sloped fields was effective at reducing contaminant concentrations but not always to less than lethal concentrations to Daphnia magna. Limited data beyond 10 m for fields of both slope types precluded making recommendations on a suitable buffer width for shallow sloped fields and evaluating the effectiveness of 20-m buffers for steep sloped fields. When paired data were combined and statistically tested for all fields, the studied pesticides underwent a 52-98% and 68-100% reduction in aqueous and particulate concentrations within 10 m and 30 m, respectively. In addition, by 10 m, soluble phosphorus, nitrate-nitrogen and total suspended solids were reduced by 34%, 38% and 64%, respectively. Results suggest buffer zones on operational farms are capable of achieving contaminant reductions comparable to those reported for controlled experiments. Inconsistent siting of sample collectors beyond 10 m limited the evaluation of the effects of field slope and buffer width on buffer effectiveness on working farms. Future studies on buffer efficiency on operational farms should focus on building the data set beyond 10 m and evaluating load reductions.     

Structural characterization of the cyanelle peptidoglycan of Cyanophora paradoxa by 252Cf plasma desorption mass spectrometry and fast atom bombardment/tandem mass spectrometry

A strategy for the structural characterization of the four major NaBH4-reduced peptidoglycan monomers derived from muramidase-digested peptidoglycan from the cyanelles of the flagellate Cyanophora paradoxa Korschikoff is described. Initial molecular weight determination of these glycopeptides was performed by positive and negative ion plasma desorption mass spectrometry. Due to the presence of two pairs of disaccharide tripeptide and disaccharide tetrapeptide monomers differing in mass by 112 units, respectively, an as yet unknown peptidoglycan modification either at the carbohydrate or at the peptide moiety was assumed. beta-Elimination of the disaccharide unit from the unreduced peptidoglycan monomers yielded the corresponding (modified) N1-lactyltripeptides and -tetrapeptides, respectively. These peptides, N-terminally blocked with lactic acid, unambiguously showed the modification to be located on the peptide moiety. By positive ion fast atom bombardment/hybrid tandem mass spectrometry of the reduced peptidoglycan monomers as well as of the corresponding deglycosylated monomers (= N1-lactylpeptides) the modification was determined to be linked to the glutamic acid moiety. Based on combined data from plasma desorption mass spectrometry, tandem mass spectrometry, accurate mass measurement and amino acid analysis of the acid hydrolysate after derivatization with o-phthaldialdehyde by high-performance liquid chromatography we could establish the structure of the modification as N-acetylputrescine. Finally, the confirmation of the linkage of the glutamic acid to diaminopimelic acid via the gamma-COOH was based on the presence of a-type peptide backbone fragment ions in the positive ion plasma desorption mass spectra of the modified N1-lactylpeptides.     

Biochemical analysis of ++Prospero protein during asymmetric cell division: cortical Prospero is highly phosphorylated relative to nuclear Prospero

Hippocampal synapses express two distinct forms of the long-term potentiation (LTP), i.e. NMDA receptor-dependent and -independent LTPs. To understand its molecular-anatomical basis, we produced affinity-purified antibodies against the GluRepsilon1 (NR2A), GluRepsilon2 (NR2B), and GluRzeta1 (NR1) subunits of the N-methyl-D-aspartate (NMDA) receptor channel, and determined their distributions in the mouse hippocampus. Using NMDA receptor subunit-deficient mice as the specificity controls, section pretreatment with proteases (pepsin and proteinase K) was found to be very effective to detect authentic NMDA receptor subunits. As the result of modified immunohistochemistry, all three subunits were detected at the highest level in the strata oriens and radiatum of the CA1 subfield, and high levels were also seen in most other neuropil layers of the CA1 and CA3 subfields and of the dentate gyrus. However, the stratum lucidum, a mossy fibre-recipient layer of the CA3 subfield, contained low levels of the GluRepsilon1 and GluRzeta1 subunits and almost excluded the GluRepsilon2 subunit. Double immunofluorescence with the AMPA receptor GluRalpha1 (GluR1 or GluR-A) subunit further demonstrated that the GluRepsilon1 subunit was colocalized in a subset, not all, of GluRalpha1-immunopositive structures in the stratum lucidum. Therefore, the selective scarcity of these NMDA receptor subunits in the stratum lucidum suggests that a different synaptic targeting mechanism exerts within a single CA3 pyramidal neurone in vivo, which would explain contrasting significance of the NMDA receptor channel in LTP induction mechanisms between the mossy fibre-CA3 synapse and other hippocampal synapses.