Damage evolution in polymer due to exposure to high-pressure hydrogen gas

The use of hydrogen as a fuel is increasing exponentially, and the most economical way to store and transport hydrogen for fuel use is as a high-pressure gas. Polymers are widely used for hydrogen distribution and storage systems because they are chemically inert towards hydrogen. However, when exposed to high-pressure hydrogen, some hydrogen diffuses through polymers and occupies the preexisting cavities inside the material. Upon depressurization, the hydrogen trapped inside polymer cavities can cause blistering or cracking by expanding these cavities. A continuum mechanics–based deformation model was deployed to predict the stress distribution and damage propagation while the polymer undergoes depressurization after high-pressure hydrogen exposure. The effects of cavity size, cavity location, and pressure inside the cavity on damage initiation and evolution inside the polymer were studied. The stress and damage evolution in the presence of multiple cavities was also studied, because interaction among cavities alters the damage and stress field. It was found that all these factors significantly change the stress state in the polymer, resulting in different paths for damage propagation. The effect of adding carbon black filler particles and plasticizer on the damage was also studied. It was found that damage tolerance of the polymer increases drastically with the addition of carbon black fillers, but decreases with the addition of the plasticizer.     

Structural Cues for Understanding eEF1A2 Moonlighting

Spontaneous mutations in the EEF1A2 gene cause epilepsy and severe neurological disabilities in children. The crystal structure of eEF1A2 protein purified from rabbit skeletal muscle reveals a post-translationally modified dimer that provides information about the sites of interaction with numerous binding partners, including itself, and maps these mutations onto the dimer and tetramer interfaces. The spatial locations of the side chain carboxylates of Glu301 and Glu374, to which phosphatidylethanolamine is uniquely attached via an amide bond, define the anchoring points of eEF1A2 to cellular membranes and interorganellar membrane contact sites. Additional bioinformatic and molecular modeling results provide novel structural insight into the demonstrated binding of eEF1A2 to SH3 domains, the common MAPK docking groove, filamentous actin, and phosphatidylinositol-4 kinase IIIβ. In this new light, the role of eEF1A2 as an ancient, multifaceted, and articulated G protein at the crossroads of autophagy, oncogenesis and viral replication appears very distant from the “canonical” one of delivering aminoacyl-tRNAs to the ribosome that has dominated the scene and much of the thinking for many decades.     

Crystallography of fracture facets in a near-alpha titanium alloy

A faceted initiation site is observed in Ti-6242 alloy for both the cyclic and static-loading test conditions. In this experimental study, the crystallographic orientation of the facets has been determined using the electron backscattered diffraction (EBSD) technique in conjunction with the quantitative tilt fractography in a scanning electron microscope (SEM). Quantitative tilt fractography analysis has been used to determine the spatial orientation of fracture facets. The results indicate that the normal-fatigue (no-dwell) fracture facets are oriented at ∼5 deg with respect to the basal plane; the dwell-fatigue fracture facets are oriented at ∼10 to 15 deg with respect to the basal plane and the static-loading fracture facets are oriented at ∼20 deg with respect to the basal plane. These crystallographic orientation determinations of the fracture facets at the crack-initiation site can be used to obtain an idea about the type of loading that produced them.     

Gonadal steroids have paradoxical effects on brain oxytocin receptors

Specific brain receptors for oxytocin have been described in several mammalian species. The distribution of these receptors differs greatly across species and in the rat, receptor binding in specific brain regions appears to depend upon gonadal steroids. This study used in vitro receptor autoradiography to examine the effects of testosterone on oxytocin receptor binding in the mouse forebrain. Three groups of male mice were compared: castrates treated with blank capsules, castrates treated with testosterone filled capsules, and intact males. Irrespective of steroid treatment, the distribution of oxytocin receptors in mouse forebrain differed markedly from patterns previously described in the rat. In addition to these species differences in receptor distribution, testosterone had effects in the mouse which differed from the induction of receptors previously reported in the rat. In the mouse ventromedial nucleus of the hypothalamus, binding in the untreated castrate males was approximately double that observed in either the intact or the testosterone-treated castrates. In other regions of the mouse brain, such as the intermediate zone of the lateral septum, binding to oxytocin receptors was increased with testosterone treatment. These results suggest that the brain oxytocin receptor varies across species not only in its distribution but also in its regional regulation by gonadal steroids. These apparently paradoxical changes in oxytocin receptor binding may result from either direct or indirect effects of gonadal steroids in mouse brain.     

Molecular mechanisms in the control of limb regeneration: the role of homeobox genes

The Ca2+ sensitivity of cardiac myofibrillar force production can be decreased by acidosis or inorganic phosphate (P(i)) and increased by caffeine. To investigate whether the source of tissue influences the potency of these agents, we compared the actions of acidosis (change of pH from 7.0 to 6.2), P(i) and caffeine (both 20 mM) on force production of skinned cardiac muscles from adult ventricle, adult atrium and neonate ventricle of the rat. Maximum Ca(2+)-activated force was reduced by all three interventions and the responses of the different muscle types to a given intervention were similar. Acidosis reduced myofibrillar Ca2+ sensitivity by 1.09 and 1.04 pCa units in adult ventricle and atrium, respectively, and P(i) reduced it by 0.19 and 0.22 pCa units. However, each effect was only one-third as great in the neonate ventricle, which showed falls of 0.33 pCa units for acidosis and 0.06 for P(i). In contrast, caffeine raised the Ca2+ sensitivity by the same amount (approximately 0.4 pCa units) in all three muscle types. The differential effect between adult and neonate seen with both acidosis and P(i) suggests some similarity in the mechanisms by which these factors decrease Ca2+ sensitivity. In contrast, the equal effects of caffeine on neonate and adult suggests that caffeine acts by a completely different mechanism. The lower pH- and P(i)-sensitivity of the neonatal ventricle can help to explain why neonatal and adult myocardium exhibit differential force responses to ischaemia (or hypoxia alone).     

Microscale wear of vitrified abrasive materials

The study of bonding hard materials such as aluminium oxide and cubic boron nitride (cBN) and the nature of interfacial cohesion between these materials and glass is very important from the perspective of high precision grinding. Vitrified grinding wheels are typically used to remove large volumes of metal and to produce components with very high tolerances. It is expected that the same grinding wheel be used for both rough and finish machining operations. Therefore, the grinding wheel, and in particular its bonding system, is expected to react differently to a variety of machining operations. In order to maintain the integrity of the grinding wheel, the bonding system that is used to hold abrasive grains in place will react differently to forces that are placed on individual bonding bridges. This paper examines the role of vitrification heat treatment on the development of strength between abrasive grains and bonding bridges, and the nature of fracture and wear in vitrified grinding wheels that are used for precision grinding applications.     

Measurement of the density and surface tension of Ni-based superalloys in the liquid and mushy states

The densities of three Ni-based superalloys have been measured in both liquid and mushy states by both a modified sessile drop method (MSDM) and a modified pycnometric method (MPM) for alloys CMSX-4 and CM186LC, and for CMSX-10 alloy by MSDM only. The surface tensions of liquid CMSX-4, CM186LC, and CMSX-10 superalloys were measured using the sessile drop method. All measurements were carried out in a highly purified argon atmosphere with the oxygen partial pressure of less than 10⁻¹⁹ MPa in the gas outlet. The densities of all superalloys in both liquid and mushy states were found to decrease with increasing temperature. The volume thermal expansion of each superalloy in the mushy state was found to be higher than that in the liquid state. The densities determined by different methods have been critically assessed and recommended values in both liquid and mushy states are given as a linear function of temperature for the three Ni-based superalloys. The surface tension of liquid CMSX-4 superalloy was found to decrease with increasing temperature, while that of liquid CMSX-10 superalloy increases with increasing temperature. The wetting behavior of liquid CM186LC on the alumina substrate was found (1) to differ significantly from that of CMSX-4 and CMSX-10 and (2) to vary with time. A HfO₂-rich layer was found in the contact area of CM186LC with the alumina substrate, which could lead to some uncertainty in the value obtained for the surface tension determined for CM186LC.