Real-time organic aerosol chemical speciation in the indoor environment using extractive electrospray ionization mass spectrometry

Understanding the sources and composition of organic aerosol (OA) in indoor environments requires rapid measurements, since many emissions and processes have short timescales. However, real-time molecular-level OA measurements have not been reported indoors. Here, we present quantitative measurements, at a time resolution of five seconds, of molecular ions corresponding to diverse aerosol-phase species, by applying extractive electrospray ionization mass spectrometry (EESI-MS) to indoor air analysis for the first time, as part of the highly instrumented HOMEChem field study. We demonstrate how the complex spectra of EESI-MS are screened in order to extract chemical information and investigate the possibility of interference from gas-phase semivolatile species. During experiments that simulated the Thanksgiving US holiday meal preparation, EESI-MS quantified multiple species, including fatty acids, carbohydrates, siloxanes, and phthalates. Intercomparisons with Aerosol Mass Spectrometer (AMS) and Scanning Mobility Particle Sizer suggest that EESI-MS quantified a large fraction of OA. Comparisons with FIGAERO-CIMS shows similar signal levels and good correlation, with a range of 100 for the relative sensitivities. Comparisons with SV-TAG for phthalates and with SV-TAG and AMS for total siloxanes also show strong correlation. EESI-MS observations can be used with gas-phase measurements to identify co-emitted gas- and aerosol-phase species, and this is demonstrated using complementary gas-phase PTR-MS observations.     

硬件锁中的无线USB

无线USB的前途似乎无与伦比——它能消除那些把大家桌面弄得像鼠窝一样小小的不怎么灵便的电缆。但事实上,只有需要大量的外设时无线USB设备才有优势,而且它必须非常微型而廉价,否则带来的麻烦远多于缠绕的电缆。因此,插在PC USB端口作为无线基站的硬件锁就必须有尽可能高的集成度。但一片芯片中要包含USB有线接口、控制器、无线基带和RF电路,技术上还无法实现。下面我们将看到一家供应商Wisalr的一种可量产参考设计,它是如何接近于解决这个问题的。     

Magnetic effects of direct ion implantation of Mn and Fe into p-GaN

In p-GaN implanted with Mn (3×10¹⁶ cm⁻² at 250 keV), the material after annealing shows ferromagnetic properties below 250 K. Cross-sectional transmission electron microscopy (TEM) revealed the presence of platelet structures with hexagonal symmetry. These regions are most likely Ga_xMn_1−xN, which produce the ferromagnetic contribution to the magnetization. In p-GaN implanted with Fe, the material after annealing showed ferromagnetic properties at temperatures that were dependent on the Fe dose, but were below 200 K in all cases. In these samples, TEM and diffraction analysis did not reveal any secondary phase formation. The results for the Fe implantation are similar to those reported for Fe doping during epitaxial growth of GaN.     

Temporary leukocyte depletion reduces ventricular dysfunction during prolonged postischemic reperfusion

Leukocyte depletion improves early postischemic ventricular performance in neonatal models of global myocardial ischemia. However, the rate of leukocyte reaccumulation after cardiopulmonary bypass and its subsequent impact on myocardial function is not known. This laboratory study examined the effect of leukocyte depletion on myocardial performance during the initial 6-hour period after bypass in an in situ, in vivo porcine model of neonatal cardiac surgery. Fifteen 3- to 5-day-old piglets (eight control and seven leukocyte depleted animals) were instrumented by placement of left ventricular short-axis sonomicrometry crystals and an intraventricular micromanometer catheter. Mechanical leukocyte depletion was achieved with Pall RC100 filters (Pall Biomedical, Inc., Fajardo, Puerto Rico) in the cardiopulmonary bypass circuit. Neonatal hearts were subjected to 90 minutes of hypothermic ischemia after a single dose of cold crystalloid cardioplegia. Two control animals died after the operation and were excluded from data analysis. Leukocyte filtration reduced the granulocyte count during initial myocardial reperfusion to 0.8% of control values. However, circulating granulocyte counts increased in leukocyte depleted animals throughout the postoperative period, reaching 68% of control values by 6 hours. Despite this rapid return of circulating granulocytes, animals subjected to leukocyte depletion had significantly better preservation of left ventricular performance (measured by preload recruitable stroke work, p < or = 0.02), left ventricular systolic function (measured by end-systolic pressure-volume relationship, p < or = 0.05), and ventricular compliance (p < or = 0.04) during the experiment. These changes in ventricular function were associated with a significant increase in left ventricular water content (p < or = 0.02) and tissue myeloperoxidase activity (p < or = 0.005) in control animals compared with leukocyte depleted animals. This study demonstrates that leukocyte depletion during initial reperfusion results in sustained improvement in postischemic left ventricular function despite the rapid return of granulocytes to the circulation.     

Chronic fluoride exposure does not cause detrimental, extraskeletal effects in nutritionally deficient rats

On the basis of observations that endemic fluorosis occurs more often in malnourished populations, a series of studies tested the hypothesis that deficient dietary intake of calcium, protein or energy affects fluoride metabolism so that the margin of safe fluoride exposure may be reduced. The objective of the investigation was to determine whether changes in fluoride metabolism in nutritionally deficient rats resulted in manifestation of any extraskeletal toxic fluoride effects not observed in healthy animals. This investigation included two studies, one that monitored the effect of calcium deficiency on the effects of chronic fluoride exposure, and a second study that observed fluoride effects in rats that were deficient either in protein or in energy and total nutrient intake. Control and experimental rats received drinking water containing 0, 0.26 (5), 0.79 (15) or 2.63 (50) mmol fluoride/L (mg/L) for 16 or 48 wk. Control rats were fed optimal diets and experimental rats were fed diets deficient in calcium (Study 1) or protein (Study 2). An additional group of experimental rats (Study 2) was provided with a restricted amount of diet; thus these rats were deficient in energy and total nutrient intake. The intake, excretion and retention of fluoride were monitored; after the rats were killed, tissue fluoride levels and biochemical markers of tissue function were analyzed. Bone marrow cells were harvested from some of the rats, after 48 wk of treatment, for determining the frequency of sister chromatid exchange, a marker of genetic damage. Although there were significant differences among fluoride treatment groups in fluoride excretion and retention that resulted in significantly greater fluoride levels in tissues of the experimental rats, we were unable to detect any harmful, extraskeletal biochemical, physiologic or genetic effects of fluoride in the nutritionally deficient rats.     

A new monitoring system for piping systems in fossil fired power plants

A CEC-funded project has been performed to tackle the problem of producing an advanced Life Monitoring System (LMS) which would calculate the creep and fatigue damage experienced by high temperature pipework components. Four areas were identified where existing Life Monitoring System technology could be improved:

1. 1. the inclusion of creep relaxation

2. 2. the inclusion of external loads on components

3. 3. a more accurate method of calculating thermal stresses due to temperature transients

4. 4. the inclusion of high cycle fatigue terms.

The creep relaxation problem was solved using stress reduction factors in an analytical in-elastic stress calculation. The stress reduction factors were produced for a number of common geometries and materials by means of non-linear finite element analysis. External loads were catered for by producing influence coefficients from in-elastic analysis of the particular piping system and using them to calculate bending moments at critical positions on the pipework from load and displacement measurements made at the convenient points at the pipework. The thermal stress problem was solved by producing a completely new solution based on Green's Function and Fast Fourier transforms. This allowed the thermal stress in a complex component to be calculated from simple non-intrusive thermocouple measurements made on the outside of the component. The high-cycle fatigue problem was dealt with precalculating the fatigue damage associated with standard transients and adding this damage to cumulative total when a transient occurred.

The site testing provided good practical experience and showed up problems which would not otherwise have been detected.     

Comparison between carbohydrate feedings before and during exercise on running performance during a 30-km treadmill time trial

The purpose of this study was to compare the effects of a carbohydrate-electrolyte solution, ingested during exercise, with the effects of a preexercise carbohydrate meal on endurance running performance. Ten endurance-trained males completed two 30-km treadmill runs. In one trial subjects consumed a placebo solution 4 hr before exercise and a carbohydrate-electrolyte solution immediately before exercise and every 5 km (C). In the other trial, subjects consumed a 4-hr preexercise high-carbohydrate meal and water immediately before exercise and every 5 km (M). Performance times were identical for M and C, and there was no difference in the self-selected speeds. Oxygen uptake, heart rates, perceived rate of exertion, and respiratory exchange ratios were also similar. However, blood glucose concentration was higher in C during the first 20 km of the 30-km run. In M, blood glucose concentration was maintained above 4.5 mmol.L-1 throughout exercise. Thus, the two conditions produced the same 30-km treadmill running performance time.     

Simulation of magnetic component models in electric circuitsincluding dynamic thermal effects

It is essential in the simulation of power electronics applications to model magnetic components accurately. In addition to modeling the nonlinear hysteresis behavior, eddy currents and winding losses must be included to provide a realistic model. In practice the losses in magnetic components give rise to significant temperature increases which can lead to major changes in the component behavior. In this paper a model of magnetic components is presented which integrates a nonlinear model of hysteresis, electro-magnetic windings and thermal behavior in a single model for use in circuit simulation of power electronics systems. Measurements and simulations are presented which demonstrate the accuracy of the approach for the electrical, magnetic and thermal domains across a variety of operating conditions, including static thermal conditions and dynamic self heating