The analysis and comparison of two novel kinds of focusing elements as reflectors

In this article, two novel kinds of focusing elements as reflectors are analyzed and compared. One is the grooved Fresnel zone plate reflector with continuous phase‐correcting. The other called subzone paraboloid reflector, has the profile that consists of a series of paraboloids. Their diffraction efficiencies and bandwidths are described. The two elements still preserve the advantages of Fresnel zone plates, namely, low profile, high efficiency, and simple fabrication. Two dual‐reflector antennas using the proposed focusing elements as the main reflectors are simulated and the results show that these antennas have good radiation performances. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:101–108, 2015.     

Analysis of the Scattering Characteristic of Several Waveguide Components Using Boundary Element Method

Several kinds of waveguide components such as curved waveguide bends, arbitrary angle waveguide bends and T-junctions have been analyzed with boundary element method in this paper. A new discretization method for the boundary element method to solve the waveguide discontinuities has been given. The numerical results obtained agree well with the experimental results and numerical results in other literature. Especially, the scattering characteristics of Forded E-, H-plane T-junctions in 3mm band have been analyzed using boundary element method and the calculation results are presented.     

Long multifilament Bi-2223 Ag-sheathed superconducting tapes and solenoids

Multifilament Ag-sheathed BiPbSrCaCuO (2223) superconducting tapes containing 49 filaments were fabricated by the powder-in-tube route and the roll-anneal process. The transport critical current densityJ _c was 1.3×10⁴ A cm^–2 at 77 K and 7×10⁴ A cm^–2 at 4.2 K in self-field. A 12-m-long tape was used to construct superconducting solenoids (50, 28, and 14 mm internal diameters) generating dc fields 380–1070 G at 4.2 K. Measurements of the variation ofJ _c with field (0–1.6 T) and bend strain (0–5%) are used to explain the performance of the solenoids. The critical bend strain of tapes was about 1.5%.     

云南丽江旅游的发展与大研古镇的发展方向问题

一、发展过程与现状 (一)古城和雪山完美地结合,特点突出,古镇拉动效应明显 丽江有丰富的旅游资源,如独特的东巴文化、古城、雪山等等。经过一段时间发展,丽江旅游产品也形成几个比较突出的亮点,如古城-雪山产品,古城如此完整,雪山的风貌如此突出,而且古城和雪山在不大的地理范围内集中到一起,这在国内是很难得的。古城被评为世界文化遗产后还形成了一个显著的市场拉动效应。     

电磁波在包含各向异性媒质多层介质中传播的分析

对电磁波在包含各向异性媒质多层介质中的传播进行分析，给出了闭合形式的解，该结构可用作法拉第旋转器，与其它准光元件组合构成的准光环行器或隔离器。也可用作辐射口径，通过改变磁化场方向和强度实现波束扫描或极化变化，给出了法拉第旋转角计算结果和实验结果。     

Microstructures of high-J c melt-textured YBa2Cu3O7−x /Ag superconductors

Silver has been previously added to the melt-textured YBa₂Cu₃O_7?x in order to increase the critical current density (J _c ) of these materials. However, the effect of this addition on theJ _c is presently unclear. The purpose of this study is to investigate the effect of silver on both critical current density and the microstructure of the melt-textured YBa₂Cu₃O_7?x superconductors by means of X-ray diffraction, optical polarized microscopy, and transmission electron microscopy (TEM). TheJ _c of the MTG YBCO/Ag samples is more than 10⁴A/cm² under the 5 kOe magnetic field. It has been shown that as the concentration of silver increases, the fraction of the 211 phase dispersed within the 123 matrix decreases. Therefore, theJ _c slightly decreases. These results, together with the effect of the 211 phase, dislocations, and other structure defects on flux pinning, are described in this paper.     

天铁炼钢厂板坯漏钢原因分析及预防

针对天铁板坯连铸机一年多来发生的漏钢事故，分析了产生的原因，提出了预防改进的措施，对今后的生产有很好的指导意义。     

Development of Bi(Pb)-2223/Ag pancake-shaped and solenoidal coils

High temperature superconducting (HTSC) multifilamentary (MT) Bi(Pb)-2223/Ag tapes with reproducible critical current density of between 15000 and 20000 A/cm² at 77 K in self field have been achieved using the standard flat-rolling method as the intermediate deformation between sintering periods. Long lengths of Bi(Pb)-2223/Ag MT tapes up to 43 m prepared by the conventional method of powder-in-tube (PIT) have been successfully produced on a laboratory scale. Several coils have been fabricated from sections of the long length tape, using the co-wound wind-and-react (W&R) procedure for the pancake-shaped and the singly-wound W&R as well as R&W procedure for the solenoidal coils. A novel W&R solenoidal coil (reaching ~973 ampere-turns) wound on an alumina ceramic tube generates a DC field of ~19 mT at 77 K and has been fabricated together with five pancake-shaped coils, each generating an average of ~5 mT at 77 K. These are destined for magnet construction with a possible combined calculated field of ~0.04 T at 77 K (with liquid nitrogen as a coolant)     

端羟基聚乳酸微球的制备与降解

以1,4-丁二醇和D,L-乳酸为原料,经缩合聚合法制备了端羟基聚乳酸,并用溶剂挥发法制备了端羟基聚乳酸微球.考察了乳化剂浓度、油水相比例及聚乳酸浓度对微球平均粒径和形貌的影响,并在pH=7.4缓冲溶液中进行了微球的降解.结果表明以二氯甲烷为溶剂,PVA作为乳化剂,室温和600r/min搅拌速度下可制得平均粒径0.5-1.0m的较均匀的、表面平滑的端羟基聚乳酸微球.随着在pH=7.4下降解时间增加,微球表面变得粗糙.     

用介孔材料制备定向碳纳米管的研究进展

综述了近年来采用介孔材料制备定向碳纳米管的研究进展,包括介孔材料的合成及介孔材料在制备定向碳纳米管方面的应用。重点介绍了采用合成介孔材料的模板剂石墨化及介孔材料作为载体制备定向碳纳米管的方法,探讨了模板剂种类、催化剂的制备方法及反应温度和时间对定向碳纳米管生长的影响和定向碳纳米管生长的介孔限制机理,并提出了这一领域的研究方向。