A thermal perspective of flash sintering: The effect of AC current ramp rate on microstructure evolution

In flash sintering experiments, the thermal history of the sample is key to understanding the mechanisms underlying densification rate and final properties. By combining robust temperature measurements with current-ramp-rate control, this study examined the effects of the thermal profile on the flash sintering of yttria-stabilized zirconia, with experiments ranging from a few seconds to several hours. The final density was maximized at slower heating rates, although processes slower than a certain threshold led to grain growth. The amount of grain growth observed was comparable to a similar conventional thermal process. The bulk electrical conductivity correlated with the maximum temperature and cooling rate. The only property that exhibited behavior that could not be attributed to solely the thermal profile was the grain boundary conductivity, which was consistently higher than conventional in flash sintered samples. These results suggest that, during flash sintering, athermal electric field effects are relegated to the grain boundary.     

An expert aid to fault diagnosis and trouble-shooting in satellitecommunications

Presents the Satellite Communications Network Expert (SaNE), a knowledge-based aid designed to provide engineering support for fault diagnosis. The SaNE is composed of two elements: a satcom network model, which simulates the structure and functionality of a system based loosely upon a large military satcom network, and a diagnostic component, which uses knowledge- and model-based reasoning techniques to analyse system anomalies and diagnose possible causes for the alarms such networks generate. The development cycle is described, emphasising lessons learnt during development and testing and the advantages and disadvantages of the techniques applied. The goal of the SaNE project is primarily commercial acceptance rather than innovation. The authors illustrate how novel concepts can be implemented in a practical system without compromising this goal     

Apoptosis and delayed neuronal damage after carbon monoxide poisoning in the rat

Delayed neurological damage after CO hypoxia was studied in rats to determine whether programmed cell death (PCD), in addition to necrosis, is involved in neuronal death. In rats exposed to either air or CO (2500 ppm), microdialysis in brain cortex and hippocampus was performed to determine the extent of glutamate release and hydroxyl radical generation during the exposures. Groups of control and CO-exposed rats also were tested in a radial maze to assess the effects of the CO exposures on learning and memory. At 3, 7, and 21 days after CO exposure brains were perfusion-fixed and hematoxylin-eosin (H&E) was used to assess injury and to select regions for further examination. DNA fragmentation was sought by examining cryosections with the terminal deoxynucleotidyl transferase-mediated dUTP-biotin nick-end labeling (TUNEL) reaction. We found significant increases in glutamate release and .OH generation during and immediately after CO hypoxia. CO-exposed rats showed learning and memory deficits after exposure associated with heterogeneous cell loss in cortex, globus pallidus, and cerebellum. The frontal cortex was affected most seriously; the damage was slight at Day 3, increased at Day 7, and persistent at Day 21 after CO exposure. TUNEL staining was positive at all three time points, and TUNEL-labeled cells were distributed similarly to eosinophilic cells. The number of cells stained by TUNEL was less than by H&E and amounted to 2 to 5% of all cell nuclei in regions of injury. Ultrastructural features of both neuronal necrosis and apoptosis also were observed readily by electron microscopy. These findings indicate that both necrosis and apoptosis (PCD) contribute to CO poisoning-induced brain cell death.     

Epilepsy, retarded growth and onchocerciasis, in two areas of different endemicity of onchocerciasis in Burundi

A high prevalence of epilepsy (up to 1.3%) was observed in an area hyperendemic for onchocerciasis in the province of Bururi, Burundi. Following this observation, epileptics and controls were examined in 2 communes (administrative units) with different endemicity for onchocerciasis. Altogether, onchocerciasis was more frequent in epileptics (81.8%) than in controls from the same households (68.3%; P < 0.05). This difference was more marked in the hyperendemic area. Other possible causes of epilepsy, including cysticercosis, were infrequent (18 possible cases among 110 epileptics). During this survey, 9 epileptics with growth retardation were seen. They showed most characteristics of Nakalanga syndrome, which was described from Uganda. All 9 such cases were suffering from onchocerciasis. These findings give more evidence of a possible association between onchocerciasis and epilepsy, and between onchocerciasis and Nakalanga syndrome.     

Influence of interfacial microcracks on the elastic properties of composites

A model is established to quantify the influence of interfacial microcracks on the elastic properties of a particulate composite using a combination of theoretical and finite element analysis. A unique way to construct physical models which could accommodate both crack size and crack density is proposed. Based on energy principles, the influence of a dilute concentration of interfacial microcracks is first studied. The case of a finite concentration of microcracks is solved subsequently by combining the dilute concentration solutions and the differential scheme. Both cases agreed well with existing composite theories for the limiting condition of complete decohesion. The final model predicts the effective elastic properties as functions of both crack size and microcrack density.     

Lorazepam-valproate interaction: studies in normal subjects and isolated perfused rat liver

Valproate (VPA) has been shown to interact with all the major antiepileptic drugs (AEDs) through two mechanisms of action: displacement from albumin binding sites and inhibition of drug metabolism. More recently, evidence showed that VPA inhibits the elimination of drugs metabolized by glucuronide conjugation. Lorazepam (LZP), which is primarily eliminated by conjugation with glucuronic acid, is administered concurrently with VPA both in treatment of epilepsy and in patients treated with VPA for psychiatric disorders. Therefore, a significant drug interaction is likely. We investigated such interaction both in in vitro isolated perfused rat liver (IPRL) and in normal subjects. LZP [2 mg, intravenous (i.v.) bolus] was administered to 8 normal volunteers before and after chronic dosing with VPA. In 6 of 8 subjects, VPA significantly decreased LZP plasma clearance by an average of 40% (p < 0.05) and increased LZP concentrations by decreasing formation clearance of the LZP glucuronide. In the IPRL studies, VPA also significantly decreased formation of LZP glucuronide (from 0.72 +/- 0.14 to 0.22 +/- 0.15 ml/h/kg, p < 0.05), indicating that IPRL is a useful tool for evaluation of the effect of VPA on drugs eliminated by glucuronide conjugation.     

A PC program for diagnosing abnormal growth, growth velocity and acceleration from longitudinal observations

A human fibroblastic cell line transformed by the SV40-T antigen sequence and continuously cultured for 7 months displayed large periodic variations in cell proliferation. This contrasted with other characteristics of this cell line that remained constant: mosaic cell shape, absence of cell contact inhibition, and predominance of a hypodiploid population. Similar fluctuations in proliferative capacity were also found during the long-term growth of a transformed but nonimmortalized human fibroblastic line prior to senescence, and in the established hamster fibroblastic Nil cell line. This growth pattern suggests a recurrent stimulation of growth in these three transformed cell lines. The proliferation pattern from cultured transformed cells may thus be complex and requires further investigation. These variations presumably influence major cell functions. This observation has important implications for the analysis of data from such cell lines.     

On upgrading the numerics in combustion chemistry codes

A method of updating and reusing legacy FORTRAN codes for combustion simulations is presented using the DAEPACK software package. The procedure is demonstrated on two codes that come with the CHEMKIN-II package, CONP and SENKIN, for the constant-pressure batch reactor simulation. Using DAEPACK generated code, analytical derivative calculations, sparsity pattern information, and hidden discontinuity information can be obtained for the models of interest. This information can be easily integrated with different solvers giving the modeler great flexibility in selecting the best solution procedure. Using the generated code, the CONP code was connected to three different solvers, and the SENKIN code was connected to two different solvers. The effect of model formulation, analytical derivatives, sparsity, and sensitivity equation solution method were analyzed for three large kinetic mechanisms for methane, acetylene, and n-heptane. For the n-heptane model, with 544 species and 2446 reactions, a factor of 10-speed improvement over the original solution procedure was found using analytical derivatives and sparse linear algebra. For sensitivity calculations, for a small number of parameters, a factor of 55 improvement over the original solution procedure was found for the n-heptane problem. Upon closer examination of results, no one method is found to always be superior to other methods, and selection of the appropriate solution procedure requires an examination of the specific kinetic mechanism, which is easily conducted using DAEPACK generated code.     

Analysis of polar compound classes in SRC-II liquids: Comparison of non-aqueous titrametric,i.r. spectrometric and h.p.l.c. methods

Results for various types of polar compounds in SRC-11 coal-derived liquids and other fuels were obtained by one or more of the three analytical methods: non-aqueous titration, i.r. spectroscopy and h.p.l.c. Practical aspects as well as precision, accuracy and assumptions necessary for effective application of each of the methods are discussed. H.p.l.c. is applicable to the widest variety of compound types, is the most rapid, most sensitive and shows the best promise for increased development and improvement. Application and development of these techniques is a logical step toward improving process monitoring, catalyst development, toxicological screening and general fuel analysis.     

ELECTRICALLY CONDUCTING GLASSES*

Glasses containing lead, bismuth, or antimony oxides or combinations of these become conducting after several hours’ reduction in hydrogen. The electronic surface conductivity is both stable and reproducible. The magnitude of the conductivity depends on the nature and amounts of the reducible oxides, the temperatures at which reduction is carried out, and the electrical influence of the nonreduced portions of the glasses.