Liquid phase sintering and characterization of SiC ceramics

The present study focuses on the sintering of silicon carbide-based ceramics (SiC) by liquid phase sintering (LPS) followed by characterization of the produced ceramics. AlN/Re₂O₃ mixtures were used as additives in the LPS process. In the first step, the LPS-SiC materials were produced in a graphite resistance furnace in the form of discs at different temperatures. The conditions with the best results regarding real density and relative density were taken as reference for sintering in the form of prismatic bars. In the second step, these samples were evaluated regarding fracture toughness (K_IC), by the Single Edge V Notch Beam – SEVNB – method, and flexural strength. K_IC behavior was evaluated according to the depth and curvature radius of the notches. Reliable K_IC values were presented when the ceramic displayed a small curvature radius at the notch tip. When the radius was large, it did not maintain the square root singularity of the notch tip. Tests were carried out to determine K_IC values in atmospheric air and water. K_IC results were lower in water than air, with a decrease ranging between 2.56% and 11.26%. The observations indicated a direct grain size correlation between K_IC values and fracture strength of the SiC ceramics.     

The association of gonorrhoea and syphilis with premature birth and low birthweight

The indications and results of single and double lung transplantation are described on the basis of 66 operations performed by the authors and on the background of the world literature. Lung transplantation is considered a new and promising therapeutic mode for treating patients with end-stage pulmonary failure related to fibrosis, emphysema, infective conditions, and pulmonary hypertension yielding satisfactory early results. The long-term prognosis of patients undergoing lung transplantation, like that of any other organ transfer, remains guarded.     

Plasmid DNA strand breaks induced by laser irradiation of 193 nm wavelength

DNA of plasmid pBR322 irradiated with laser at a wavelength of 193 mm was treated with an extract containing proteins from E.coli K12 AB1157 (wild-type). The enzymes were found to produce single- and double-strand DNA breaks, which was interpreted as a transformation of a portion of cyclobutane pyrimidine dimers and (6-4) photoproducts into nonrepairable single-strand DNA breaks. The products resulted from ionization of DNA, in particular, single-strand breaks, transform to double-strand breaks. A comparison of these data with the data on survival of plasmid upon transformation of E.coli K12 AB1157 enables one to assess the biological significance of single- and double-strand breaks. The inactivation of the plasmid (in AB1157) is mainly determined by the number of directly formed laser-induced single-strand breaks, whereas the contribution of enzymatically produced single- and double-strand breaks is insignificant.     

Wetting behaviour of silicon nitride ceramics by Ti–Cu alloys

The wetting of Ti–Cu alloys on Si₃N₄ was analyzed by the sessile drop method, using an imaging system with a CCD camera during the heating under argon flow. The contact angle was measured as a function of temperature and time. The samples were cut transversally and characterized by scanning electron microscopy and energy dispersive spectrometry (SEM/EDS). Wettability of the Ti–Cu alloy on Si₃N₄ is influenced by the reaction between the Ti and the ceramic. The TC1 and TC2 alloys presented low final contact angle values around 2° and 26°, respectively, indicating good wetting on Si₃N₄.     

A p‐version,first order shear deformation,finite element for geometrically non‐linear vibration of curved beams

A p‐version, hierarchical finite element for curved, moderately thick, elastic and isotropic beams is introduced. The convergence properties of the element are analysed and some results are compared with results published elsewhere or calculated using a commercial finite element package. It is verified that, with the proposed element, shear locking does not affect the computation of the natural frequencies and that low dimensional, accurate models are obtainable. Geometrically non‐linear vibrations due to finite deformations, which occur for harmonic excitations with frequencies close to the first three natural frequencies of vibration, are investigated using Newmark's method. The influence of the thickness, longitudinal inertia and curvature radius on the dynamic behaviour of curved beams are studied. Copyright © 2004 John Wiley & Sons, Ltd.     

Combined time and wavelength multiplexing technique of optical fiber grating sensor arrays using commercial OTDR equipment

The use of a commercial optical time domain reflectometry device for simultaneous wavelength and time domain multiplexing of fiber-optic Bragg grating sensors is proposed and demonstrated. The realization of such systems provides an inexpensive way of interrogating several hundreds of sensors in a single fiber. Strain resolution of 30 /spl mu/m/m over a strain measuring range of 0.5% was obtained.     

Mal de Meleda: a report of four cases from the United Arab Emirates

Scanning electron microscopy was used to study the effect of cyclophosphamide (Cy) on molar development in 18 Sprague-Dawley rats from 15 to 48 days of age after birth. Doses of 30 mg/kg body weight of Cy dissolved in 1 ml 0.9% NaCl were given to the rats at 10 and 13 days of age. Eighteen control rats had injections of 1 ml 0.9% NaCl at the same ages. The most obvious changes in the experimental teeth were found in the developing roots of the first and second molars and in both the crown and roots of the third molar. The roots of the first and second molars were short and showed apical closure in the experimental rats. In addition to the disturbances in crown and root formation, the third molars were also significantly reduced in total size as compared with the third molars in the control rats.