Abnormal sensory nerve conduction in multifocal demyelinating neuropathy with persistent conduction block

Two patients exhibited chronic, slightly asymmetric weakness and wasting with fasciculations of the upper limb and hand muscles. Motor nerve conduction studies showed features of multifocal conduction block in nerve segments other than those usually involved in entrapment syndromes. The F wave was markedly delayed in the median and ulnar nerves. Transcranial cortical and cervical root magnetic stimulation showed bilaterally delayed thenar responses with normal central conduction time. Needle electromyography demonstrated a chronic denervation pattern with large polyphasic motor units in several muscles of the upper limbs. Sensory symptoms were mild and limited to paresthesias in the fingertips. Sensory nerve conduction velocity and sensory nerve action potential amplitudes were normal in elbow-to-wrist and wrist-to-finger segments of the median and ulnar nerves, but there was a delayed cortical response and unrecognizable Erb's point and cervical responses in the somatosensory evoked potentials to median nerve electrical stimulation. Electrophysiologic examination was normal in most nerves of the lower limbs. These two patients, meeting clinical and electrophysiologic criteria of multifocal neuropathy with conduction block, demonstrate that sensory fibers may also be involved in this syndrome.     

Ultrastructural studies of the ileum neobladder

Of 101 women, 15-50 years of age, presenting with vaginal discharge, 34 had bacterial vaginosis and were randomly assigned to a seven-day course of oral treatment with either erythromycin (0.5 g b.i.d.) or metronidazole (0.4 g b.i.d.) in a single-blind, cross-over study. Treatment failure (> or = three clinical signs of bacterial vaginosis) occurred in 13 (81%) of 16 patients given erythromycin, as compared with three (17%) of 18 women treated with metronidazole (p < 0.001). Persistence of Gardnerella vaginalis, Mobiluncus species and/or Mycoplasma hominis was found in 14 of 16 patients treated with erythromycin, and in four of 16 patients treated with metronidazole. Treatment with metronidazole was successful (< or = two clinical signs of bacterial vaginosis) in eight of 10 cases of erythromycin treatment failure. Neither of two cases of metronidazole treatment failure was cured with erythromycin. At three-month follow-up of 31 women, persistence or recurrence of bacterial vaginosis was diagnosed in 11 cases (36%).     

Swoop: A Web Ontology Editing Browser

In this paper, we describe Swoop, a hypermedia inspired Ontology Browser and Editor based on OWL, the recently standardized Web-oriented ontology language. After discussing the design rationale and architecture of Swoop, we focus mainly on its features, using illustrative examples to highlight its use. We demonstrate that with its Web-metaphor, adherence to OWL recommendations and key unique features, such as Collaborative Annotation using Annotea, Swoop acts as a useful and efficient Web Ontology development tool. We conclude with a list of future plans for Swoop, that should further increase its overall appeal and accessibility.     

Natural convection from narrow horizontal plates at moderate Rayleigh numbers

The present work deals with the natural convection flow and heat transfer from a horizontal plate cooled from above. Experiments are carried out for rectangular plates having aspect ratios between φ=0.036 and 0.43 and Rayleigh numbers in the range 290?Ra_w?3.3×10⁵. These values of Ra_w and φ have been selected below those commonly considered in previous research in view of a future application to the design of printed circuit boards. The plates are made of two different metals, copper and steel. The choice of a metal is relevant to the present problem because the plates are heated by means of an electric current. Important variations of the surface temperature are observed along the transverse direction for the steel plates. The surface of the copper plates is almost isothermal because of the high thermal conductivity of the metal.Calculations for a semi-infinite plate are carried out to predict the transverse profiles of the surface temperature and heat flux and to visualize the structure of the flow. Three-dimensional calculations are also used at a qualitative level to observe the changes in the flow structure due to the finite length of the plate. Present results are compared with both previous experimental work and analyses that are based on boundary layer theory. It is shown that analyses for an infinite boundary layer are not completely applicable to the present problem because of its different physics. The most relevant feature of the natural convection flow, which is not predicted by boundary layer analyses, is a thermal plume rising near the center of the plate.Present heat transfer results differ from previous experimental work because of the lower Rayleigh numbers and aspect ratios investigated here. The Nusselt number is found to depend on Ra_wⁿ, with the exponent n=0.17 being lower than most of the values reported in the literature. This comparatively low value is related to the transverse conduction of heat through the air, which becomes increasingly significant as Ra_w approaches zero. It is shown that such a low-Ra_w effect can be accounted for in a physically consistent manner by adding a constant term to the heat transfer correlation. On the other hand, it is found that the Nusselt number does not significantly depend on the aspect ratio in the range of φ investigated contrary to what has been previously reported for wider plates.     

Silver Electrodeposition from Photographic Processing Solutions

This paper describes the parameters that are important in the industrial practice of silver removal from photographic fixers. The experiments were performed under potentiostatic control using synthetic solutions. The current efficiency was analysed as a function of the cathodic potential taking into account the deposit quality. A cathodic potential of ?0.5 V against a saturated calomel electrode is recommended. The conditions to prevent the darkening of the electrodeposit were investigated. The determination of silver concentration in the solution was made by direct potentiometry. The results obtained with synthetic fixers were corroborated by making the silver deposition from commercial fixers in an electrochemical reactor with rotating cylinder electrode intercalated in an electrolytic flow circuit in order to simulate practical conditions.     

Flow of CO<Subscript>2</Subscript>–ethanol and of CO<Subscript>2</Subscript>–methanol in a non-adiabatic microfluidic T-junction at high pressures

In this work, an experimental investigation of the single- and multiphase flows of two sets of fluids, CO₂–ethanol and CO₂–methanol, in a non-adiabatic microfluidic T-junction is presented. The operating conditions ranged from 7 to 18 MPa, and from 294 to 474 K. The feed mass fraction of CO₂ in the mixtures was 0.95 and 0.87, respectively. Under these operating conditions, CO₂ was either in liquid, gas or supercritical state; and the mixtures experienced a miscible single phase or a vapour–liquid equilibrium (VLE), with two separated phases. Taylor, annular and wavy were the two-phase flow regimes obtained in the VLE region. In the single phase region, the observed flows were classified into standard single-phase flows, “pseudo” two-phase flows and local phenomena in the T-junction. Flow regime maps were generated, based on temperature and pressure conditions. Two-phase flow void fractions and several parameters of Taylor flow were analysed. They showed a clear dependency on temperature, but were mostly insensitive to pressure. A continuous accumulation of liquid, either in the CO₂ channel or at the CO₂-side wall after the T-junction, disturbed most of the experiments in VLE conditions by randomly generating liquid plugs. This phenomenon is analysed, and capillary and wetting effects due to local Marangoni stresses are suggested as possible causes.     

Sex-related differences in foot shape

The purpose of the study was to investigate sex-related differences in foot morphology. In total, 847 subjects were scanned using a 3-D-footscanner. Three different analysis methods were used: (1) comparisons were made for absolute foot measures within 250-270 mm foot length (FL); (2) and for averaged measures (% FL) across all sizes; (3) the feet were then classified using a cluster analysis. Within 250-270 mm FL, male feet were wider and higher (mean differences (MD) 1.3-5.9 mm). No relevant sex-related differences could be found in the comparison of averaged measures (MD 0.3-0.6% FL). Foot types were categorised into voluminous, flat-pointed and slender. Shorter feet were more often voluminous, longer feet were more likely to be narrow and flat. However, the definition of 'short' and 'long' was sex-related; thus, allometry of foot measures was different. For shoe design, measures should be derived for each size and sex separately. Different foot types should be considered to account for the variety in foot shape. Improper footwear can cause foot pain and deformity. Therefore, knowledge of sex-related differences in foot measures is important to assist proper shoe fit in both men and women. The present study supplements the field of knowledge within this context with recommendations for the manufacturing of shoes.     

Long short-term cognitive networks

Neural Computing and Applications - In this paper, we present a recurrent neural system named long short-term cognitive networks (LSTCNs) as a generalization of the short-term cognitive network...