Chromium evaporation and oxidation characteristics of alumina-forming austenitic stainless steels for balance of plant applications in solid oxide fuel cells

The chromium (Cr) evaporation behavior of several different types of iron (Fe)-based AFA alloys and benchmark Cr₂O₃-forming Fe-based 310 and Ni-based 625 alloys was investigated for 500 h exposures at 800 °C to 900 °C in air with 10% H₂O. The Cr evaporation rates from alumina-forming austenitic (AFA) alloys were ~5 to 35 times lower than that of the Cr₂O₃-forming alloys depending on alloy and temperature. The Cr evaporation behavior was correlated with extensive characterization of the chemistry and microstructure of the oxide scales, which also revealed a degree of quartz tube Si contamination during the test. Long-term oxidation kinetics were also assessed at 800 to 1000 °C for up to 10,000 h in air with 10% H₂O to provide further guidance for SOFC BOP component alloy selection.     

Synthesis and characterization of conducting copolymers from aniline and o‐anisidine in HCl solutions

Conducting poly(aniline‐co‐o‐anisidine) (PAS) films with different ratios of aniline units in the polymer chain were prepared by oxidative polymerization of different molar ratios of aniline and o‐anisidine in 1 M HCl using cyclic voltammetry. Due to the much higher reactivity of o‐anisidine, the structure and properties of PASs were found to be dominated by the o‐anisidine units. The polymerization of poly‐o‐anisidine and PASs followed zero‐order kinetics with respect to formation of the polymer (film thickness) and the autocatalytic polymerization of aniline was completely inhibited. In contrast to polyaniline, a decrease in the polymerization temperature was found to increase the amount of copolymer formed and its redox charge. The presence of aniline units in PASs led to a pronounced increase in the molecular weight and conductivity, and a decrease in the solubility in organic solvents. Repetitive charging/discharging cycles showed that PASs resist degradation more than polyaniline. Copyright © 2003 Society of Chemical Industry     

High brachial artery bifurcation: a report of 2 cases

High division of the brachial artery was observed in two cadavers, during routine dissection of upper extremities. In the first case, the brachial artery of the right upper extremity was divided into its two terminal branches immediately after passing between the lateral and medial roots of the median nerve and just below the origin of the profunda brachii artery. The lateral branch was the radial artery, located in the space normally occupied by the brachial artery and the medial one was the ulnar artery. In the second case, the brachial artery was divided into its two terminal branches just below the origin of the profunda brachii artery. Accurate knowledge of the relationships and course of these major arterial conduits and particularly of their variational patterns, is of considerable practical importance in the conduct of reperative surgery in the arm, forearm and hand.     

Effects of flux enhancing polymer on the characteristics of sludge in membrane bioreactor process.

A newly developed membrane performance enhancer (MPE) was used to prevent membrane fouling in a membrane bioreactor (MBR) process. It transpired that 1,000 mg/l of MPE reduced polysaccharide levels from 41 mg/I to 21 mg/I on average under the experimental condition. Repeated experiments also confirmed that 50-1,000 mg/l of MPE could reduce membrane fouling significantly and increase the intervals between membrane cleanings. Depending on MPE dosages and experimental conditions, trans-membrane pressure (TMP) increase was suppressed for 20-30 days, while baseline TMP surged within a few days. In addition, MPE allowed MBR operation even at 50,000 mg/l of total solid and reduced permeate COD. However, no evidence of toxicity for sludge was found from respiratory works.     

The Kitty Genovese murder and the social psychology of helping: The parable of the 38 witnesses.

This article argues that an iconic event in the history of helping research--the story of the 38 witnesses who remained inactive during the murder of Kitty Genovese--is not supported by the available evidence. Using archive material, the authors show that there is no evidence for the presence of 38 witnesses, or that witnesses observed the murder, or that witnesses remained inactive. Drawing a distinction between the robust bystander research tradition and the story of the 38 witnesses, the authors explore the consequences of the story for the discipline of psychology. They argue that the story itself plays a key role in psychology textbooks. They also suggest that the story marks a new way of conceptualizing the dangers of immersion in social groups. Finally, they suggest that the story itself has become a modern parable, the telling of which has served to limit the scope of inquiry into emergency helping. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Long-term effect of lisinopril and atenolol on kidney function in hypertensive NIDDM subjects with diabetic nephropathy

The aim of our study was to evaluate whether inhibition of ACE (lisinopril 10-20 mg/day) can reduce the rate of decline in kidney function more than reducing blood pressure with conventional antihypertensive treatment (atenolol 50-100 mg/day), usually in combination with a diuretic. We performed a prospective, randomized, parallel study for 42 months, double blind for the first 12 months and single blind thereafter. Forty-three (21 lisinopril and 22 atenolol) hypertensive NIDDM patients with diabetic nephropathy were enrolled. Data from 36 patients (17 lisinopril and 19 atenolol, 60 +/- 7 years of age, 27 men) who completed at least 12 months of the study period are presented. At baseline, the two groups were comparable: glomerular filtration rate (51Cr-EDTA plasma clearance) was 75 +/- 6 and 74 +/- 8 ml x min(-1) x 1.73 m(-2), mean 24-h ambulatory blood pressure (A&D TM2420) was 110 +/- 3 and 114 +/- 2 mmHg, and 24-h urinary albumin excretion rate was 961 (range 331-5,727) and 1,578 (476-5,806) mg/24 h in the lisinopril and atenolol groups, respectively. The mean follow-up time was similar, 37 and 35 months in the lisinopril and atenolol groups, respectively. Mean ambulatory blood pressure was equally reduced in the two groups, 12 +/- 2 and 10 +/- 2 mmHg in the lisinopril and atenolol groups, respectively. Glomerular filtration rate declined in a biphasic manner with a faster initial (0 to 6 months) change of 1.25 +/- 0.49 and 0.81 +/- 0.29 ml x min(-1) x month(-1) followed by a slower sustained decline (6 to 42 months) of 0.59 +/- 0.10 and 0.54 +/- 0.13 ml x min(-1) x month(-1) in the lisinopril and atenolol groups, respectively. No significant differences were observed in either initial or sustained decline in glomerular filtration rate between the two groups. Urinary albumin excretion was reduced (% reduction of baseline) more in the lisinopril than in the atenolol group, at 55 (95% CI 29-72) and 15% (-13 to 34), respectively (P = 0.01). In conclusion, the relentless decline in kidney function characteristically found in hypertensive NIDDM patients with diabetic nephropathy can be reduced equally effectively by two antihypertensive treatments, the beta-blocker atenolol and the ACE inhibitor lisinopril.     

Microfabricated Lamb wave device based on PZT sol-gel thin film formechanical transport of solid particles and liquids

The fabrication using silicon micromachining and characterization of an acoustic Lamb wave actuator is presented. The intended use of the device is for mass transport and sensor applications. The device consists of dual interdigitated transducers patterned on a thin-film composite membrane of silicon nitride, platinum, and a sol-gel-derived piezoelectric ceramic (PZT) thin film. The acoustic properties of the device are presented along with preliminary applications to mechanical transport and liquid delivery systems. Improved acoustic signals and improved mass transport are achieved with PZT over present Lamb wave devices utilizing ZnO or AlN as the piezoelectric transducer