Influence of device engineering on the analog and RF performances of SOI MOSFETs

This work presents a systematic comparative study of the influence of various process options on the analog and RF properties of fully depleted (FD) silicon-on-insulator (SOI), partially depleted (PD) SOI, and bulk MOSFET's with gate lengths down to 0.08 /spl mu/m. We introduce the transconductance-over-drain current ratio and Early voltage as key figures of merits for the analog MOS performance and the gain and the transition and maximum frequencies for RF performances and link them to device engineering. Specifically, we investigate the effects of HALO implantation in FD, PD, and bulk devices, of film thickness in FD, of substrate doping in SOI, and of nonstandard channel engineering (i.e., asymmetric Graded-channel MOSFETs and gate-body contacted DTMOS).     

Heat transport in dilute mixtures of3He in superfluid4He

We report new measurements of the effective thermal conductivity K_eff and relaxation time τ in dilute mixtures of³He in superfluid⁴He, with molar concentrationsX≤10⁻³. The temperature range extended fromT≈1.4 K toT _λ. Both K_cff and τ are found to agree with theoretical predictions, in contrast to previous experiments where significant differences were observed. A new thermal conductivity cell design was used which almost completely eliminates extraneous volumes and surfaces, and the earlier results are explained in relation to these design changes.     

Screening mixtures for biological activity by NMR

Development of the new drugs often involves the screening of compound libraries for biological activity. Currently, the biologically active component can only be identified if either a pure compound is being tested or if the components of a mixture are spatially separated, for example, on beads. Here, we present an NMR technique based on the transferred nuclear Overhauser effect (transfer NOE) that allows identification and structural characterization of biologically active molecules from a mixture. As an example we demonstrate that from mixtures of oligosaccharides only alpha-L-Fuc-(1-->6)-beta-D-GlcNAc-OMe binds to Aleuria aurantia agglutinin. The sign of transferred NOEs is opposite to NOEs of small molecules that do not bind to the protein and, thus, an unequivocal identification of molecules with binding activity is possible. Normally, the selection of bound ligands is further facilitated in that the absolute intensity of transfer NOEs is much greater than that of NOEs of non-binding molecules. In addition, transfer NOEs provide information on the three-dimensional structure of the ligands in the bound state. Therefore, measuring transfer NOEs of mixtures of small molecules in the presence of large molecules, like proteins, should significantly enhance the options for screening mixtures of compounds for biological activity.     

A formal description of open distributed processing (ODP) trading based on guidelines for the definition of managed objects (GDMO)

New requirements of growing computer networks and information systems have an influence on extended client/server models with increased functionality. This forms the basis for service management in distributed systems which is realized by a service trading concept. This paper studies the requirements derived from the Open Distributed Processing (ODP) Reference Model in order to consider an open service market. Furthermore, it examines management possibilities for describing the service trading scenario. Because of similar architectures and properties ODP services, service offers, types, exporters and traders are mapped onto management components and modeled as managed objects. Therefore, the Guidelines for the Definition of Managed Objects (GDMO) are used. The final concept allows a precise and unambiguous study of the service trading scenario and provides means for exporting and importing of service offers in a distributed environment.     

Production of maraging steel grades and the influence of specified and nonspecified elements for special applications

The material properties of maraging steels are greatly affected by the alloy and inclusion content and hence by the production route. This paper describes various past and current production routes at Böhler Edelstahl GmbH and the effect of these routes on the specified element (alloy) and non-specified element (inclusion) contents. Non-metallic inclusions were investigated by EDX analysis. The effects of various alloying and tramp elements on the material properties are presented as a statistical evaluation of previous melts. Nitrogen solubility was calculated with Thermo–Calc for maraging steel Mat.-No. 1.6354 and the precipitation of nitrides is discussed. A proposal is made for the production of melts with improved properties.     

Electrosprayed and selenized Cu/In metal particle films

Nano-particulate copper and indium metal layers of 1-2 μm have been deposited by non-vacuum techniques such as doctor blade, screen printing and electrospray using alcoholic suspension pastes. Electrospray showed a high efficiency of material usage and yielded the most uniform morphology. The metal precursor layers were subjected to a thermal treatment (500-600 °C) in selenium vapor to convert the porous metal layers into CuInSe₂ compound layers. The chemical conversion, investigated by X-ray diffraction, showed the presence of the In₂O₃ impurity phase in the precursor as well as in the selenized layers.     

Viscoelastic response of solid rocket motor components for service life assessment

A methodology for determining the response of rocket motor materials and bondlines to thermal loadings by measuring their dynamic mechanical properties is reported. The critical temperatures at which debonding and/or propellant cracking occur and the number of thermal cycles required to induce failure were evaluated. These results were compared with those from instrumented rocket motors subjected to similar thermal loadings. A model, developed for fibre reinforced composites, was applied to the propellant-inhibitor bimaterial obtained from a rocket motor. The internal energy dissipation due to a lack of perfect adhesion at the propellant–inhibitor interface, tan δ_adh, was used to give an indication of the failure mode of the bondline (i.e., adhesive failure at the interface or cohesive failure in the propellant) and the bond adhesion parameter, C, was related to the bond strength measured by rectangular bond-in-tension tests. This revised version was published online in November 2006 with corrections to the Cover Date.     

Expression of functional MHC class II molecules by a mouse pro-B cell clone

OBJECTIVE: Pooled bronchoalveolar lavage fluid (BALF), the return of lavage, contains both bronchial and alveolar material which differ from each other. Artifacts may be created by filtering, centrifuging and washing cells before cytopreparation. This study presents reference values of healthy volunteers for the alveolar sample, ALF, cytopreparation being performed without filtration or centrifugation. METHODS: Eighteen healthy, non-smoking volunteers underwent a standard bronchoalveolar lavage using 10 aliquots of 20 ml of saline. Excluding the return of the first and second aliquots, the rest were pooled and examined cytologically, immunocytochemically and biochemically. The mean, standard deviation, and 95% confidence limits were calculated for the following variables: amount of return, estimated content of epithelial lining fluid (ELF), total and differential cell counts on filter and cytocentrifuge (CCF) preparations, computed cell counts per unit volume of ALF, distribution of lymphocyte subgroups CD3+CD2, CD4, CD8, CD19, CD25 and CD57, and the ratio of CD4 to CD8, the amounts of lymphocytes in the same subgroups per volume of ALF, and the concentrations of total protein, albumin, immunoglobulins A, G and M, hyaluronic acid, eosinophilic cationic protein (ECP), procollagen III aminoterminal propeptide (PCP) and beta 2-microglobulin in ALF and in ELF, as well as the ratios of the concentrations of the solutes in ALF to the same in serum. RESULTS: The 95% confidence limits of means for the most important variables were as follows: estimated ELF content 0.42-0.74%; total cells in ALF 76.6-143.0 x 10(6) l-1; distribution of inflammatory cells on filter and CCF slides: macrophages 74.9-83.6 and 81.4-90.1%, lymphocytes 13.1-22.5 and 8.1-16.4%, and neutrophils 1.0-4.1 and 0.7-2.7%, respectively; distribution of lymphocyte subsets: CD3+CD2 85.6-90.6%, CD4 44.3-53.1%, CD8 26.9-35.8%; concentration of solutes in ALF: total protein 44.8-61.3 mg l-1, albumin 15.4-22.2 mg l-1, IgA 1.8-3.4 mg l-1, IgG 3.1-6.1 mg l-1, IgM 0.05-0.26 mg l-1, hyaluronic acid 8.8-11.1 micrograms l-1, ECP 0.19-0.77 micrograms l-1, PCP 0.005-0.58 micrograms l-1, beta 2-microglobulin 62.2-81.5 micrograms l-1. CONCLUSIONS: Our results show that excluding the bronchial sample from ALF of volunteer subjects and omitting filtering and washing before cytopreparation produces cytologic, immunocytochemical and biochemical reference values with reasonable 95% confidence limits to be used in clinical settings.