Measurements on a Dynamic A-B Phase Boundary in Superfluid 3He at Very Low Temperatures

We present preliminary measurements of the dynamics of a moving A-B phase interface in superfluid ³ He at temperatures below 0.2T _c We initially stabilise the interface at low temperatures with a shaped magnetic field. We can then move the interface in a controlled manner by applying small additional time-dependent fields. The interface is created inside a quasiparticle radiator consisting of a cylindrical chamber in weak thermal contact with the refrigerant. Vibrating wire resonators inside the radiator allow us to monitor the temperature of the superfluid and to infer the heat generated by the interface motion. When we oscillate the interface at low frequencies, we measure spectacular oscillatory swings of the liquid temperature arising from the enormous change in the low lying density of states as the volume of the A-phase superfluid is alternately compressed and expanded. We have also observed hysteresis in the transition as a function of magnetic field. In particular, we observe a small history-dependent super-magnetisation of the B-phase prior to A-phase nucleation in the experimental chamber. When the system is in the metastable super-magnetised state we are able to observe a higher nucleation probability of the A-phase when the cryostat is exposed to neutrons.     

Biomechanical comparison of the dewar and interspinous cervical spine fixation techniques

STUDY DESIGN: This study evaluates and compares the stiffness of two cervical spine fixation techniques. OBJECTIVES: This biomechanical study was carried out to compare the interspinous and Dewar cervical spine fixation techniques. SUMMARY OF BACKGROUND DATA: Interspinous wiring is a commonly used method of fixation in the cervical spine. The Dewar technique is less commonly known and practiced, and clinical experience has suggested that it may be a more stable technique. METHODS: Cervical spine specimens stabilized with the interspinous and "Dewar" techniques were biomechanically tested in flexion and in torsion. Stiffness and energy absorption under moderate loads were compared. The Dewar technique uses contoured double corticocancellous iliac grafts as internal grafts/splints fixed to the spine with threaded pins and wire. The interspinous technique is a single interspinous wire loop. Eleven fresh human cervical spines were harvested from cadavers. The spines were destabilized at C4-C5 by sectioning all tissue except the anterior longitudinal ligament. Each fixation technique was applied alternatively and tested on each spine. RESULTS: In torsion testing (n = 5), the Dewar fusion was 61% stiffer than the interspinous technique (P < 0.02). Dewar: 11.3 N/mm (s.d. 4.9 N/mm) and interspinous: 8.4 N/mm (SD 3.3 N/mm). In flexion testing (n = 6), the Dewar technique was 35% stiffer than the interspinous technique (P < 0.10). Dewar: 655.4 Nmm/degree (SD 293 Nmm/degree) and interspinous: 406.8 Nmm/degree (SD 113.0 Nmm/degree). Energy absorption with the interspinous technique was greater in flexion (P < 0.10) and in torsion (P < 0.005), indicating more deformation with the interspinous technique. There was no statistically significant difference between the means of specimens tested first and those tested second independently of the fixation technique. CONCLUSIONS: These tests indicate that the Dewar cervical spine fixation is stiffer than the single interspinous wire in both flexion and particularly torsion. This project is the only biomechanical study of the Dewar technique that we are aware of, and the results support the clinical findings regarding the effectiveness of this technique.     

Turbulence generated by vibrating wire resonators in superfluid 4He at low temperatures

No Heading We have measured responses of vibrating wire resonators in superfluid ⁴He at millikelvin temperatures. We find evidence for turbulence generation above a critical velocity on the order of a few cm/s. At the critical velocity for the onset of turbulence, the resonator velocity abruptly decreases and shows hysteretic behavior. Surprisingly we find that the resonant frequencies of the resonators increase in the turbulent regime. We also find that the critical velocity may be reduced by the presence of turbulence generated by a neighboring vibrating wire resonator, allowing the detection of existing turbulence in the low temperature regime.PACS numbers: 67.40 Vs, 67.40 Pm     

Prevalence, distribution, and diversity of Listeria monocytogenes in retail environments, focusing on small establishments and establishments with a history of failed inspections

Despite growing concerns about cross-contamination of ready-to-eat foods with Listeria monocytogenes, our knowledge about the ecology and transmission of L. monocytogenes in retail establishments has remained limited. We conducted a cross-sectional study to characterize the prevalence, distribution, and subtype diversity of L. monocytogenes in 120 New York State retail deli establishments that were hypothesized to present an increased risk for environmental L. monocytogenes contamination (i.e., small establishments and establishments with a history of failed New York State Agriculture and Markets inspections). Analysis of these data along with previously reported data for 121 predominantly larger retail establishments in New York State identified establishment size, geographic location, and inspection history as significant predictors of L. monocytogenes presence and prevalence. The odds of an establishment being L. monocytogenes positive were approximately twice as high for large establishments, establishments located in New York City, or establishments with poor inspection history (as compared with establishments without these attributes), even though correlation between location and inspection history complicated interpretation of results. Within an establishment, L. monocytogenes was significantly more prevalent on nonfood contact surfaces than on food contact surfaces; prevalence was particularly high for floors and in floor drains, sinks, the dairy case, and milk crates. L. monocytogenes subtype diversity differed between sites, with lineage I isolates significantly associated with nonfood contact surfaces and lineage II isolates significantly associated with food contact surfaces. Isolates belonging to the same ribotype were often found dispersed across multiple sites within an operation.     

A Quasiparticle Detector for Imaging Quantum Turbulence in Superfluid ^3He-B

We describe the development of a two-dimensional quasiparticle detector for use in visualising quantum turbulence in superfluid $^3$ He-B at ultra-low temperatures. The detector consists of a $5 \times 5$ matrix of pixels, each a 1 mm diameter hole in a copper block containing a miniature quartz tuning fork. The damping on each fork provides a measure of the local quasiparticle flux. The detector is illuminated by a beam of ballistic quasiparticles generated from a nearby black-body radiator. A comparison of the damping on the different forks provides a measure of the cross-sectional profile of the beam. Further, we generate a tangle of vortices (quantum turbulence) in the path of the beam using a vibrating wire resonator. The vortices cast a shadow onto the face of the detector due to the Andreev reflection of quasiparticles in the beam. This allows us to image the vortices and to investigate their dynamics. Here we give details of the design and construction of the detector and show some preliminary results for one row of pixels which demonstrates its successful application to measuring quasiparticle beams and quantum turbulence.     

Measuring the Prong Velocity of Quartz Tuning Forks Used to Probe Quantum Fluids

Recently, quartz tuning forks have been used to probe the dynamics of quantum fluids. For many of these measurements it is important to know the velocity amplitude of the tips of the vibrating fork prongs. We have used different techniques to establish, with an accuracy of a few percent, the relationship between the electrical and mechanical properties of several commercial quartz tuning forks with fundamental resonant frequency ～32 kHz. The velocity is usually inferred from an electro-mechanical calibration that models a quartz prong as a clamped, rectangular cantilever beam. We have tested the accuracy of this calibration using three methods: measurement of the amplitude at which the fork prongs touch each other; direct optical measurement of the moving fork prongs using strobe microscopy; and a Michelson interferometry technique operating with a 670 nm laser. All three methods yield consistent results. The velocity so determined is found to be 10% lower than that of the standard electro-mechanical calibration.     

Clostridium difficile from healthy food animals: optimized isolation and prevalence

Two isolation methods were compared for isolation of Clostridium difficile from food animal feces. The single alcohol shock method (SS) used selective enrichment in cycloserine-cefoxitin fructose broth supplemented with 0.1% sodium taurocholate, followed by alcohol shock and isolation on tryptic soy agar supplemented with 5% sheep blood, and cycloserine-cefoxitin fructose agar. The double alcohol shock method (DS) used alcohol shock prior to and after selective enrichment in cycloserine-cefoxitin fructose broth supplemented with 0.1% sodium taurocholate, followed by isolation on tryptic soy agar supplemented with 5% sheep blood and cycloserine-cefoxitin fructose agar. A total of 55 (15.9%, n = 345) swine fecal samples, 32 (2.4%, n = 1,325) dairy cattle fecal samples, and 188 (6.3%, n = 2,965) beef cattle fecal samples were positive for C. difficile by either method. However, the DS was significantly better than the SS for the recovery of C. difficile from swine feces, while the SS was significantly better than the DS for the recovery of C. difficile from beef cattle feces. There was no significant difference between methods for the recovery of C. difficile from dairy cattle feces. This study suggests that food animals might harbor C. difficile and it provides critical information that isolation methods might not have universal application across animal species.