Annotation alignment method on P2P-TV system

Peer-to-Peer Networking and Applications - P2P-TV is a TV system that receives content through a peer-to-peer network. Content is stored in the distributed manner then to be serviced to users, and...     

Derivation of a second-order switching surface in the boundary control of buck converters

A second-order switching surface in the boundary control of buck converters is derived in this letter. The formulated switching surface can make the overall converter exhibit better steady-state and transient behaviors than the one with a first-order switching surface. The switching surface is derived by estimating the state trajectory movement after a switching action, resulting in a high state trajectory velocity along the switching surface. This phenomenon accelerates the trajectory moving toward the target operating point. The proposed control scheme has been successfully applied to a 120-W buck converter. The large-signal performance and a comparison with the first-order switching surface have been studied.     

Measurement and numerical simulation of three‐dimensional fiber orientation states in injection‐molded short‐fiber‐reinforced plastics

To determine three‐dimensional fiber orientation states in injection‐molded short‐fiber composites, a confocal laser scanning microscope (CLSM) is used. Since the CLSM optically sections the specimen, more than two images of the cross sections on and below the surface of the composite can be obtained. Three‐dimensional fiber orientation states can be determined by using geometric parameters of fiber images obtained from two parallel cross sections. For experiments, carbon‐fiber‐reinforced polystyrene is examined by the CLSM and geometric parameters of fibers on each cross‐sectional plane are measured by an image analysis. In order to describe fiber orientation states compactly, orientation tensors are determined at different positions of the prepared specimen. Three‐dimensional orientation states are obtained without any difficulty by determining the out‐of‐plane angles utilizing fiber images on two parallel planes acquired by the CLSM. Orientation states are different at different positions and show the shell–core structure along the thickness of the specimen. Fiber orientation tensors are predicted by a numerical analysis and the numerically predicted orientation states show good agreement with measured ones. However, some differences are found at the end of cavity. They may result from the fountain flow effects, which are not considered in the numerical analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 500–509, 2003     

Advanced disturbance observer design for mechanical positioning systems

Disturbance-observer (DOB)-based controller design is one of the most popular methods in the field of motion control. In this paper, the generalized disturbance compensation framework, named the robust internal-loop compensator (RIC) is introduced and an advanced design method of a DOB is proposed based on the RIC. The mixed sensitivity optimization problem, which is the main issue of DOB design, is also solved through the parametrization of the DOB in the RIC framework. Differently from conventional methods, the Q-filter is separated from the mixed sensitivity optimization problem and a systematic design law for the DOB is proposed. This guarantees the robustness and optimality of the DOB and enables the design for unstable plants.     

Endometrioid carcinoma arising from endometriosis of the sigmoid colon during estrogenic treatment

A case of endometrioid carcinoma arising from endometriosis of the sigmoid colon is reported. The patient had been treated with unopposed continuous estrogen injection for twenty years after bilateral salpingo-oophorectomy because of severe endometriosis. The pathology, pertinent literature and implications of the present case are discussed.     

Influence of schedule and mode of administration on effectiveness of podofilox treatment of papillomas

We investigated the timing of podofilox delivery to see how it correlated with papilloma size. We looked at times ranging from once per week (morning and afternoon) to five times per week (morning and afternoon). We also looked at delivery systems that might enhance the effectiveness of the drug by increasing penetration of the overlying cutaneous horn. These included soaking prior to drug administration, the use of a grooved needle subsequent to drug administration, and the various possible combinations of these techniques. We found that the timing of treatments had relatively little effect on the size of the papillomas. For example, at the end of ten weeks, the geometric mean diameter (GMD) (mm) of the papillomas treated five times per week and induced by a 10(-1) dilution of the virus (group B) was 18. Likewise the GMD (mm) of papillomas treated once per week was 18 (group D). On the other hand, we found that soaking plus the use of a grooved needle plus podofilox resulted in the curing of all lesions induced by a 10(-2) virus dilution and of most induced by the 10(-1) dilution, whereas soak plus podofilox or podofilox alone were not as effective in curing the lesions. Podofilox plus needle approached the soak plus podofilox plus needle in effectiveness. Treatment schedule was not a critical determinant of podofilox effectiveness. Therapeutic benefits were enhanced by hydration of the overlying cutaneous horn and penetration with a grooved needle.     

Strategy and issue frames in election campaign coverage: a social cognitive account of framing effects

This study examines how news frames in campaign coverage affect individuals' interpretation of campaigns. Framing effects are conceptualized in terms of the process by which textual features in news stories set limits on knowledge use in the construction of a discourse model - a mental model constructed through the interaction between news frames and the interpreter's social knowledge. Examining message structures in campaign news stories led to identifying two major frames in campaign coverage: strategy and issue. Narrative data collected from two field experiments were analyzed. The findings suggest that both strategy-framed and issue-framed print news stories are effective in influencing campaign interpretation.     

Cure of malignant ascites and generation of protective immunity by monoclonal antibody-targeted activation of a glucuronide prodrug in rats

We examined the in vivo efficacy of targeting beta-glucuronidase (betaG) to activate a glucuronide prodrug (BHAMG) of p-hydroxyaniline mustard (pHAM) at hepatoma ascites in Sprague-Dawley rats. Injection i.p. of 500 microg RH1-betaG, a conjugate formed between recombinant betaG and monoclonal antibody RH1 with specificity for an antigen expressed on AS-30D rat hepatoma cells, into rats bearing AS-30D ascites resulted in the accumulation of 54 microg conjugate per 10(9) tumor cells after 2 hr. Ascites fluid and serum contained 0.53 and 0 microg/ml, respectively, RH1-betaG 2 hr after injection of the conjugate. Conjugate binding to AS-30D cells was heterogeneous and non-saturated, as determined by flow cytometry. BHAMG was less toxic than pHAM to SD rats based on measures of animal mortality, weight loss and hematological toxicity. Treatment of rats bearing established hepatoma ascites with 500 microg RH1-betaG followed 2 hr later with a single i.p. injection of 30 mg/kg BHAMG or 3 i.p. injections of 10 mg/kg BHAMG 2, 3 and 4 hr later resulted in the cure of 6/8 and 8/8 animals, respectively. Treatment with BHAMG or pHAM alone did not produce cures, whereas treatment with a control antibody-betaG conjugate and BHAMG produced significantly greater hematological toxicity compared to treatment with RH1-betaG and BHAMG. All cured rats were completely protected from rechallenge with 2 x 10(7) AS-30D cells, indicating that successful treatment of animals induced protective immunity.     

Characterization method of thermomechanical parameters for microelectronic materials

Reliability of thermomechanical simulations is critically linked to the accuracy of the mechanical properties that govern the behaviour of structure, like Young's modulus (E) and coefficient of thermal expansion (CTE). For many cases, the values found in literatures are dealing with bulk properties without detailed information on temperature effects. To address such issues, it is necessary to measure the materials parameters as a function of temperature. The measurement of CTE is usually accomplished by evaluating the thermal deflections of a subjected material layer deposited on a substrate, providing that E is known at a specific temperature of experiment. A bilayer method, based on theory of elasticity, is proposed to determine both E and CTE for a given temperature with a good resolution. This paper presents the theoretical analysis, the design and process of the microsystem test structures, and the main calculation results.