A novel soft-switching full-bridge DC/DC converter: analysis,design considerations, and experimental results at 1.5 kW, 100 kHz

The addition of an external commutating inductor and two clamp diodes to the phase-shifted PWM (pulsewidth modulated) full-bridge DC/DC converter substantially reduces the switching losses of the transistors and the rectifier diodes, under all loading conditions. The authors give analyses, practical design considerations, and experimental results for a 1.5 kW converter with 60 V, 25 A output, operating at 100 kHz clock frequency and 95% efficiency     

Hydrogenases, accessory genes and the regulation of [NiFe] hydrogenase biosynthesis in Thiocapsa roseopersicina

The purple (Sulphur) phototrophic bacterium, Thiocapsa roseopersicina BBS contains several [NiFe] hydrogenases, of which two are membrane bound. Mutant T. roseopersicina cells, carrying deletions in both gene clusters showed hydrogenase activity. This activity was located in the cytoplasm. The structural gene cluster hoxEFUYH was identified and sequenced. In addition, genes homologous to hupUV/hoxBC, the hydrogen sensing hydrogenase have been identified and sequenced.Regulation of hydrogenase biosynthesis was studied in detail for HydSL (renamed HynSL). A random mutagenesis system was optimised for T. roseopersicina. One of the mutations was in a gene similar to that coding for the HypF proteins in other organisms. Inactivation of the hypF gene resulted in a 60-fold increase in hydrogen evolution under nitrogen fixing conditions. In addition to hypF, the following accessory genes were identified: hydD, hupK, hypC1, hypC2, hypDE. Characterisation of the corresponding gene products and search for additional accessory genes are in progress.     

Volatile constituents of palm wine and palm sap

Palm wine and pasteurised palm sap volatiles were collected, concentrated on a Tenax GC and analysed by gas chromatography and gas chromatography-mass spectrometry. Eighty-two components were identified: 47 esters, 9 alcohols, 5 acids, 6 carbonyls, 2 acetals, 4 terpenes and 9 hydrocarbons. These had all been found previously in conventional wines. Odour evaluation of the separated palm wine components as they eluted suggested that no one compound is responsible for the characteristic palm wine odour. The acetates of higher alcohols and the ethyl esters of straight-chain aliphatic C₆-C₁₀ acids seemed to be important and may play a big role in imparting the fruity nuances of characteristic palm wine odour. Their association with alcohols seemed also to be necessary for the expression of typical palm wine odour. The qualitative difference between palm sap aroma and palm wine aroma appeared to be due mainly to the presence of these esters and alcohols in palm wine and their apparent absence from palm sap, as well as to the presence of some low-boiling esters and alcohols in palm sap and their apparent absence from palm wine.     

Estimation of impurity profiles of drugs and related materials: part 19: theme with variations. Identification of impurities in 3-oxosteroids

Due to the varied reactions leading to the 3-oxo group in steroids and the reactivity of its environment, a large number of impurities related to this group are formed during the reaction steps and the degradation studies. In this paper the experiences from the authors laboratory with the 3-oxo-related impurities in 19-nor-4-ene-3-oxosteroids (norgestrel, norethisterone, nandrolone, its esters and Nestorone) as well as corticosteroids (prednisolone, mazipredone, etc) are presented. The impurities include saturated 3-ones, 1-ene-3-ones, 5(10)-ene-3-ones, 3-deoxo and 3-ethinyl-3,5-diene derivatives, 6-ene, 8(14)-ene, 6,8(14)-diene, 6-hydroxy (alpha and beta), 10beta-hydroxy and 6-one derivatives in 4-ene-3-oxosteroids and 8(9)-ene, 9(11)-ene, 11alpha-hydroxy, 11-oxo and 4-ene-3-one derivatives in 11beta-hydroxy-1,4-diene-3-oxosteroids. The chromatographic, spectroscopic and hyphenated techniques used in this study include TLC, GC, HPLC with diode array UV detector, GC-MS, LC-MS and NMR methods.     

Pharmacological Evidence on Augmented Antiallodynia Following Systemic Co-Treatment with GlyT-1 and GlyT-2 Inhibitors in Rat Neuropathic Pain Model

The limited effect of current medications on neuropathic pain (NP) has initiated large efforts to develop effective treatments. Animal studies showed that glycine transporter (GlyT) inhibitors are promising analgesics in NP, though concerns regarding adverse effects were raised. We aimed to study NFPS and Org-25543, GlyT-1 and GlyT-2 inhibitors, respectively and their combination in rat mononeuropathic pain evoked by partial sciatic nerve ligation. Cerebrospinal fluid (CSF) glycine content was also determined by capillary electrophoresis. Subcutaneous (s.c.) 4 mg/kg NFPS or Org-25543 showed analgesia following acute administration (30–60 min). Small doses of each compound failed to produce antiallodynia up to 180 min after the acute administration. However, NFPS (1 mg/kg) produced antiallodynia after four days of treatment. Co-treatment with subanalgesic doses of NFPS (1 mg/kg) and Org-25543 (2 mg/kg) produced analgesia at 60 min and thereafter meanwhile increased significantly the CSF glycine content. This combination alleviated NP without affecting motor function. Test compounds failed to activate G-proteins in spinal cord. To the best of our knowledge for the first time we demonstrated augmented analgesia by combining GlyT-1 and 2 inhibitors. Increased CSF glycine content supports involvement of glycinergic system. Combining selective GlyT inhibitors or developing non-selective GlyT inhibitors might have therapeutic value in NP.     

Crystal structures and phase transformation of deuterated lithium imide, Li2ND

Half-Heusler compounds of Sn-doped TiCoSb “TiCoSn_xSb_1−x (x = 0.0, 0.01, and 0.05)” were prepared and their thermoelectric properties were measured above room temperature. From the EDX analysis, all the samples have three phases: the TiCoSn_xSb_1−x, Co-rich, and Ti-rich phases. The values of the thermoelectric power increase with Sn doping, and a positive thermoelectric power is obtained in the sample of TiCoSn_0.05Sb_0.95. The thermal conductivity decreases both with increasing temperature and with Sn content. The maximum value of ZT for p-type material is 0.030 at 988 K in the sample of TiCoSn_0.05Sb_0.95.     

Microstructure and creep behavior in AE42 magnesium die-casting alloy

The micro structural analysis of die-cast AE42 reveals a correlation between micro structure and creep strength. A lamellar-phase Al₁₁RE₃, which dominates the interdendritic microstructure of the alloy, partly decomposes above 150‡C into Al₂RE and Al (forming Mg₁₇Al₁₂). The increased solubility of aluminum in magnesium at higher temperatures may also promote the decomposition of Al₁₁RE₃. The creep strength decreases sharply with these phase changes. A mechanism for the decrease in creep strength of AE42 is proposed whereby the reduced presence of lamellar Al1₁₁RE₃ and/or the presence of Mg₁₇Al₁₂ contribute to the observed poor creep strength at higher temperatures.     

Synthesis of a PPV‐fluorene derivative: Applications in luminescent devices

Synthesis of a polyfluorene/poly(p‐phenylene vinylene) derivative, the Poly [(9,9′‐di‐hexylfluorenediylvinylene‐alt‐1,4‐phenylenevinylene)‐co‐((9,9′‐(3‐t‐butylpropanoate) fluorene‐1,4‐phenylene)] (LaPPS 42) was performed following Wittig and Suzuki routes. Polyfluorenes and derivatives have been used in electroluminescent devices, and the synthesis described here has the advantage in pave the way to get distinct structures having different emission spectra. An extensive study of its electrochemical, thermomechanical, optical, and structural properties was carried out, as well as its application in electroluminescent devices. Polymer light‐emitting diodes (PLEDs) and polymer light‐emitting electrochemical cells (PLECs) were built using LaPPS 42 as active layer, and their electric and optical characterizations confirm they have a potential as active element in electroluminescent devices. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42579.     

The Role of Exosomes in Cancer Progression

Early detection, characterization and monitoring of cancer are possible by using extracellular vesicles (EVs) isolated from non-invasively obtained liquid biopsy samples. They play a role in intercellular communication contributing to cell growth, differentiation and survival, thereby affecting the formation of tumor microenvironments and causing metastases. EVs were discovered more than seventy years ago. They have been tested recently as tools of drug delivery to treat cancer. Here we give a brief review on extracellular vesicles, exosomes, microvesicles and apoptotic bodies. Exosomes play an important role by carrying extracellular nucleic acids (DNA, RNA) in cell-to-cell communication causing tumor and metastasis development. We discuss the role of extracellular vesicles in the pathogenesis of cancer and their practical application in the early diagnosis, follow up, and next-generation treatment of cancer patients.     

Influence of sputter deposition parameters on the properties of tunable barium strontium titanate thin films for microwave applications

Barium strontium titanate (BST) thin films are studied with respect to their application as tunable dielectric at microwave frequencies. BST thin films are deposited by means of radio-frequency magnetron sputtering on platinized Si substrates. The substrate to target distance during sputter deposition is varied and the effect on structure, topology, composition and electronic properties is monitored using X-ray diffraction, atomic force microscopy, Rutherford backscattering spectrometry and X-ray photoelectron spectroscopy. These findings are related to the dielectric measurements, which are carried out at 1 MHz and in the microwave range up to 8 GHz using metal-insulator-metal structures with Pt electrodes. For further device evaluation, leakage current measurements are carried out. Changing the process parameter strongly affects the composition of the films. The results emphasize the possibility for enhancing the microwave properties by fine-tuning of the chosen process parameter.