辊式拉拔模用于连续拉拔机组的新技术

针对进口连续拉拔机组，独创设计了可配套使用的二连式辊模，并首次很好地解决了惯用模在辊模后的安装问题，是一种很有前途的新技术。     

Preparation and Properties of Rare Earth Modified Carbon Black/Natural Rubber Composites

The oxides Eu, Ho, Er and Dy were used to prepare the hydroxides of rare earth modified carbon black. Then natural rubber latex （NRL） was added into the reactor. The system reacted at 85 ℃ with stirring for 1 h to prepare powdered HAF-Ln（OH）3/NR composites. The effects of the kind and content of Ln on the particle size distribution of P [ NR/HAF-Ln （OH）3 ] and mechanical properties of its vulcanizate were studied respectively. It is found that rare earth can help to get the powder of the composite, the product particle with a diameter less than 0.9mm will be get when the composites containing the compound of Ho, Er and Dy with dosage of 1.0, 1.0, O. 5 percent, respectively. The adding of Ln can improve the tensile strength and tear strength of the vulcanizate effectively, what＇s more, Er and Dy can decrease the permanent set of vulcanizate significantly. The SEM studies shows that P[ NR/HAF-Dy （OH）3 ] vulcanizate shows superior mechanical properties that depend primarily on the absence of free carbon black, the fine dispersion of carbon black in the rubber matrix and better polymer-filler interaction.     

饱和—非饱和土体非稳定渗流数值分析

本文对一般的非饱和渗流有限元计算方法加以改进，有效地消除了非饱和渗流数值计算中存在的数值弥散现象。同时还提出了一种简便有效的逸出面处理新方法，并给出了非饱和非稳定渗流计算的实例。     

P(SBR/NR/HAF)并用胶的性能

在SBR胶乳／NR胶乳共混的基础上，采用凝聚共沉法制备高耐磨炭黑（HAF）填充型粉末丁苯橡胶／天然橡胶并用胶[P(SBR/NR/HAF)]。研究了SBR／NR并用比、制备工艺等对P（SBR／NR／HAF）并用胶的混沌流变性能和物理机械性能的影响，并与块状SBR／NR／HAF并用胶进行了比较。研究表明，与SBR／NR／HAF相比，P（SBR／NR／HAF）的表观剪切粘度在SBR用量小于50份时对混炼时间的依赖性较低，而在SBR用量大于50份后对混炼时间具有更高的依赖性；P（SBR／NR／HAF)硫化胶 拉伸强度在整个并用范围内对SBR／NR并和比不敏感；采用胶乳预混合的工艺制备的P（SBR／NR／HAF）具有较好的物理机械性能。     

Particle size distribution,mixing behavior,and mechanical properties of carbon black (high‐abrasion furnace)–filled powdered styrene butadiene rubber

High‐abrasion furnace black (HAF, grade N330)–filled powdered styrene butadiene rubber [P(SBR/HAF)] was prepared and the particle size distribution, mixing behavior in a laboratory mixer, and mechanical properties of P(SBR/HAF) were studied. A carbon black–rubber latex coagulation method was developed for preparing carbon black–filled free‐flowing, noncontact staining SBR powders, with particle diameter less than 0.9 mm, under the following conditions: carbon black content > 40 phr, emulsifier/carbon black ratio > 0.02, and coating resin content > 2.5 phr. Over the experimental range, the mixing torque τ_α of P(SBR/HAF) was not as sensitive to carbon black content and mixing temperature as that of HAF‐filled bale SBR (SBR/HAF), whereas the temperature build‐up ΔT showed little dependency on carbon black content. Compared with SBR/HAF, P(SBR/HAF) showed a 20–30% mixing energy reduction with high carbon black content (>30 phr), which confers to powdered SBR good prospects for internal mixing. Carbon black and the rubber matrix formed a macroscopic homogenization in P(SBR/HAF), and the incorporation step is not obvious in the internal mixing processing results in these special mixing behaviors of P(SBR/HAF). A novel mixing model of carbon black–filled powdered rubber, during the mixing process in an internal mixer, was proposed based on the special mixing behaviors. P(SBR/HAF) vulcanizate showed better mechanical properties than those of SBR/HAF, dependent primarily on the absence of free carbon black and a fine dispersion of filler on the rubber matrix attributed to the proper preparation conditions of noncontact staining carbon black–filled powdered SBR. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2494–2508, 2004     

Mechanical properties and crosslink density of rare earth‐modified high‐abrasion furnace‐filled powdered natural rubber

High‐abrasion furnace‐filled powdered natural rubber [P(NR/HAF)] has more advantages than traditional HAF‐filled bale NR (NR/HAF) because of its better environmental performance and easier processing quality, but its lower mechanical properties are disadvantageous. To improve the mechanical properties, rare earth‐modified HAF‐filled powdered NR [P(NR/HAF‐Ln)] (Ln = Sm,La,Pr) was prepared by means of coacervation–coprecipitation, using rare earth‐modified HAF as separant and filler. The effect on mechanical properties of P(NR/HAF‐Ln) vulcanizate exerted by the emulsifier/HAF ratio, powdering temperature, Ln/HAF ratio and type of Ln, and HAF content were studied. The results indicated that when optimum formulation, the mechanical properties of P(NR/HAF‐Ln) vulcanizate were better than P(NR/HAF) vulcanizate. In addition, the relationship of the apparent crosslink density and HAF content of P(NR/HAF‐Ln), P(NR/HAF), NR/HAF vulcanizates was also investigated, along with their SEM microphotographs of tensile fracture surface, which indicated that the excellent mechanical properties of P(NR/HAF‐Ln) vulcanizate was attributed to correct amount of Ln that could increase crosslink density and reinforce the interface structure of NR matrix/HAF‐Ln particle. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1755–1762, 2006     

我国异型钢管生产分析

分析了我国生产的异型钢管质量水平和品种规格情况,探讨了国产异型钢管的发展方向。     

在斜轧延伸机上使用拉力芯棒的新工艺

介绍了在管材斜轧延伸机上使用拉力芯棒的优点。采用拉力芯棒可以提高速度效率，可以轧制薄壁管，还可减小不均匀变形及改善管材内表面质量。     

均匀设计法在粉末氯丁橡胶制备中的应用

以高分子树脂为包覆剂，采用凝聚包覆法将CRl21型氯丁胶乳制备成粉末氯丁橡胶。用均匀设计法研究了制备工艺路线中的主要4个因子(氯化钠、包覆剂M81、包覆剂M82和脂肪酸盐)对产物粒径分布以及物理机械性能的影响，并用回归分析法拟合了产物的粒径分布和物理机械性能与主要变量之间的试验数据，在试验范围内预测产物的性能并作了验证。结果表明，4个影响因子对硫化胶拉伸强度和扯断伸长率的影响不显著，但对产物中1-3mm和小于1mm粒子所占的质量分数、500％定伸应力、邵尔A型硬度和永久变形的影响很显著。     

乙烯-辛烯共聚物接枝苯乙烯-丙烯腈共聚物的合成及其表征

用苯乙烯(St)、丙烯腈(AN)2种单体和乙烯一辛烯共聚物(POE)进行溶液接枝共聚合反应,制备了乙烯-辛烯共聚物接枝苯乙烯-丙烯腈共聚物(POE-g-SAN),探讨了接枝共聚反应条件,并对POE-g-SAN进行了表征.结果表明,接枝共聚反应的接枝率(GR)和接枝效率(GE)均随着St/AN(质量比)的减小而稍有增大,当POE/St-AN(质量比)为50/50时,GR与GE达到最大值;增加BPO用量有利于接枝反应;当反应物POE与St-AN在甲苯中的质量分数为27.5%时,GR与GE达到最大值;在反应前10 h,随着反应时间的延长,GR增大,GE在4 h时达到最大值77.8%,在反应10 h后,接枝反应几乎不再进行;在POE与St-AN接枝共聚反应中,POE已接枝了SAN支链,且GR越大,SAN支链越多;POE-g-SAN有2个玻璃化转变温度(Tg),约为-50℃和110℃;随着GR的增大,POE-g-SAN中POE相的Tg升高,熔融温度和熔融热均降低;随着共单体中AN配比量的增加,POE-g-SAN中SAN相的Tg升高.