45 GHz self-pulsation with narrow linewidth in quantum dot Fabry-Perot semiconductor lasers at 1.5 /spl mu/m

Self-pulsation at 45 GHz repetition frequency has been demonstrated in 1.5 /spl mu/m monolithic single-section quantum dot Fabry-Perot semiconductor lasers without saturable absorber. The mode-beating exhibits a narrow linewidth below 100 kHz, demonstrating high phase correlation between these modes. Such modelocked lasers open ways to low timing-jitter components for clock recovery or millimetre-wave generation in wireless transmission applications.     

Arsenic deactivation enhanced diffusion and the reverseshort-channel effect

The effect of enhanced diffusion caused by the electrical deactivation of arsenic on the reverse short-channel effect (RSCE) in NMOS devices is investigated. A simple four-mask process was utilized to fabricate deep sub-micron NMOS devices. Source/drain (S/D) implant and anneal conditions were varied in order to determine their implications on the RSCE. Results indicate that when high concentrations of arsenic deactivate, enhanced diffusion occurs, leading to significantly more RSCE. This implies that the dose of the arsenic implant and the subsequent anneals should be carefully considered in source/drain engineering     

CONDITIONING COAL GAS WITH REFRIGERATED METHANOL IN A SYSTEM OF PACKED COLUMNS

Experience with the operation of a pilot-scale unit is used to outline potential difficulties in the operation of acid gas removal systems on gases produced from coal. The pilot plant has been used to condition gases produced from subbituminous coal, devolatilized char, peat and lignite. The solvent used in the acid gas removal system has been refrigerated methyl alcohol. Data from this study document accumulation of hydrocarbons, sulfur and nitrogen compounds, and mercury in the circulating solvent.     

Truck driver scheduling in Canada

This paper presents and studies the Canadian Truck Driver Scheduling Problem (CAN-TDSP), which is the problem of determining whether a sequence of locations can be visited within given time windows in such a way that driving and working activities of truck drivers comply with Canadian Commercial Vehicle Drivers Hours of Service Regulations. Canadian regulations comprise the provisions found in US hours of service regulations as well as additional constraints on the maximum amount of driving and the minimum amount of off-duty time on each day. We present two heuristics and an exact approach for solving the CAN-TDSP. Computational experiments demonstrate the effectiveness of our approaches and indicate that Canadian regulations are significantly more permissive than US hours of service regulations.     

Using space windowing for a preliminary analysis of complex time data in human component system studies. Examples with eye-tracking in advertising and car/head movements in driving

Empirical studies of human systems often involve recording multidimensional signals because the system components may require physical measurements (e.g., temperature, pressure, body movements and/or movements in the environment) and physiological measurements (e.g., electromyography or electrocardiography). Analysis of such data becomes complex if both the multifactor aspect and the multivariate aspect are retained. Three examples are used to illustrate the role of fuzzy space windowing and the large number of data analysis paths. The first example is a classic simulated data set found in the literature, which we use to compare several data analysis paths generated with principal component analysis and multiple correspondence analysis with crisp and fuzzy windowing. The second example involves eye-tracking data based on advertising, with a focus on the case of one category variable, but with the possibility of several space windowing models and time entities. The third example concerns car and head movement data from a driving vigilance study, with a focus on the case involving several quantitative variables. The notions of analysis path multiplicity and information are discussed both from a general perspective and in terms of our two real examples.     

Stop-reaction time and the internal clock

In a stop-reaction-time (stop-RT) task, a subject is presented with a regular, isochronous sequence of brief signals separated by a constant time interval, or stimulus onset asynchrony (SOA). His/her task is to press a response key as fast as possible when the sequence stops. As the sequence unfolds, an internal representation of the SOA duration builds up. Stop-RT is assumed to be triggered when an internal clock, operating as an "alarm clock," reaches a time criterion. Criterion setting is contingent upon variability in the SOA's internal representation. In Experiment 1A, stop-RT was measured for isochronous sequences of brief tones, light flashes, and also sequences of tones and flashes presented in regular alternation (tone-light-tone ...). Stop-RT was a linear function of SOA duration (ranging from 250 to 1,000 msec), regardless of modality, supporting a "central-clock" hypothesis. On the other and, taken together, the results of Experiments 1A, 1B, 2, and 3 suggest that no internal representation of the bimodal (tone-light) SOA of alternating sequences builds up. Indeed, an alternating sequence is physically equivalent to two interlaced isochronous subsequences, one auditory and one visual. So, two internal representations, one for the auditory (tone-tone) and one for the visual (light-light) SOA, could build up, and two time criteria running "in parallel" could thus support stop-RT. To provide a critical test of parallel timing, stop-RT was measured for bimodal 5:3 polyrhythms formed by the superposition of auditory and visual isochronous sequences that had different SOA durations (Experiment 4). Parallel timing accounted for a large proportion of variance in polyrhythmic stop-RT data. Overall findings can be accounted for by assuming a functional architecture of an internal clock in which pulses emitted by a central pacemaker are available in parallel with two modality-specific switch-accumulator "timing modules."     

Combined planning and scheduling in a divergent production system with co-production: A case study in the lumber industry

Many research initiatives carried out in production management consider process planning and operations scheduling as two separate and sequential functions. However, in certain contexts, the two functions must be better integrated. This is the case in divergent production systems with co-production (i.e. production of different products at the same time from a single product input) when alternative production processes are available. This paper studies such a context and focuses on the case of drying and finishing operations in a softwood lumber facility. The situation is addressed using a single model that simultaneously performs process planning and scheduling. We evaluate two alternative formulations. The first one is based on mixed integer programming (MIP) and the second on constraint programming (CP). We also propose a search procedure to improve the performance of the CP approach. Both approaches are compared with respect to their capacity to generate good solutions in short computation time.     

Measuring concentration: Sampling design issues,as illustrated by the case of perfectly stratified samples

Using the artificial example of perfectly stratified samples, we have shown the effect different sampling designs have on the determination of concentration values. More concretely, we have studied the following four cases: sampling of items in the case the number of sources is known (we have further considered the cases when there are many items in every source and when this is not so); sampling of items in the case the number of sources is unknown, and finally, sampling of sources.