Association of angiotensin-converting enzyme gene I/D polymorphism with change in left ventricular mass in response to physical training

PURPOSE: To determine the radiologic characteristics of cystic dystrophy of the duodenal wall. MATERIALS AND METHODS: Ten patients with cystic dystrophy of the duodenal wall and chronic pancreatitis underwent ultrasonography (US) (n = 10), computed tomography (CT) (n = 10), endoscopic US (n = 5), and endoscopic retrograde cholangiopancreatography (ERCP) (n = 9). Cystic dystrophy of the duodenal wall was classified as either cystic or solid. The imaging findings were retrospectively analyzed and compared with findings at pancreatoduodenectomy (n = 10). RESULTS: The more frequent cystic type (n = 7) of cystic dystrophy of the duodenal wall was characterized by the presence of easily recognizable cystic lesions (diameter, more than 1 cm), located within the thickened wall of the second portion of the duodenum. The solid type (n = 3) of cystic dystrophy of the duodenal wall demonstrated fibrous thickening of the duodenal wall within which small cysts (diameter, less than 1 cm) were present. The intraduodenal cysts were usually elongated or bilobate with a thick wall. The thickening of the duodenal wall appeared as a solid layer between the duodenal lumen and the pancreas, hypoechoic at US, isoattenuating at unenhanced CT, and hypoattenuating in the early phase (after initiation of infusion of contrast material) and isoattenuating in the late phase (after completion of infusion) at contrast material-enhanced CT. Findings at retrospective analysis of CT and endoscopic US images were characteristic. CONCLUSION: Imaging modalities, notably CT and endoscopic US, helped establish the diagnosis of cystic dystrophy of the duodenal wall.     

Voluntarism: is it a useful concept for health education in the accident and emergency department?

As the year 2000 looms closer, the emphasis on health education as a means of attaining the 38 targets for 'Health for All' increases. Despite various initiatives, little, if any, progress has been made in narrowing the health divide. Currently, terms such as 'self-care', 'individual responsibility' and 'community empowerment' are often used with emphasis on individual freedom to choose. The author contends that to assume all individuals have that freedom and act voluntarily, is to deny the impact of social structure on health. Health education and the concept of voluntarism will be critically examined from the perspective of nursing in an accident and emergency department.     

PKI dies hard

Public Key Infrastructure is staging a comeback, according to new research from European IT user association EEMA.     

Cosleeping (bedsharing) among infants and toddlers

This study was designed to investigate the effect of retaining coronal tooth substance on the performance of post-retained core materials, and to compare the fracture resistance of the system with an intact tooth prepared to similar dimensions. Ten teeth restored with post-retained silver amalgam, and 10 teeth restored with silver-glass cermet, all with a retained single wall of coronal tooth substance, were compared with 10 unrestored teeth prepared to similar dimensions when subjected to a shearing load. The results showed no statistically significant difference between the unrestored teeth and those restored with a silver-glass cermet. Whilst the teeth restored with silver amalgam had a significantly higher fracture resistance (P > 0.01) there was greater tendency to root fracture.     

High solids content emulsions. III. Synthesis of concentrated latices by classic emulsion polymerization

Two different methods of producing bi‐ and trimodal latices of a mixture of methyl methacrylate, butyl acrylate, and small amounts of acrylic acid were tested. It is shown that a combination of concentrating blends of seed particles by semibatch reaction, followed by a nucleation of small particles plus a second semibatch phase allowed us to obtain stable latices with solids contents over 65% and viscosities of below 2500 mPa s^?1 with little coagulum formation. The key parameter in determining latex stability, coagulum formation, and viscosity appears to be the the particle size distribution, and especially its modification attributed to secondary nucleation. Because it is not possible to eliminate water‐soluble monomers from the polymerization recipe, secondary (homogeneous) nucleation must be minimized by careful addition of the free‐radical initiator and choice of monomer feed flow rates. The nucleation of the third population in the trimodal latices is best accomplished with a mixed surfactant system because renucleation by anionic surfactant alone leads to detrimental changes in the particle size distribution (PSD) resulting from excessive flocculation of particles. In addition, it was found that the viscosity of the final products was not sensitive to small changes in the ionic strength of the latex, although neutralization to a pH of 6 effectively doubles the final latex viscosity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1916–1934, 2002; DOI 10.1002/app.10513     

High‐solid‐content emulsions. V. Applications of miniemulsions to high solids and viscosity control

The use of miniemulsions of styrene and butyl acrylate to make high‐solid‐content, low‐viscosity latices was investigated. Products were obtained with solid concentrations greater than 70 wt % and viscosities as low as 350 mPa s at shear rates of 20 s^?1. This was possible with monomodal and bimodal latices. In addition, the compartmentalization of the reactive species in the miniemulsion systems was exploited to produce latices with high solid concentrations, low viscosities, and bimodal molecular weight distributions. This demonstrated a potentially interesting application for this sort of material. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 745–752, 2005     

BubbleNet: A Cyber Security Dashboard for Visualizing Patterns

The field of cyber security is faced with ever‐expanding amounts of data and a constant barrage of cyber attacks. Within this space, we have designed BubbleNet as a cyber security dashboard to help network analysts identify and summarize patterns within the data. This design study faced a range of interesting constraints from limited time with various expert users and working with users beyond the network analyst, such as network managers. To overcome these constraints, the design study employed a user‐centered design process and a variety of methods to incorporate user feedback throughout the design of BubbleNet. This approach resulted in a successfully evaluated dashboard with users and further deployments of these ideas in both research and operational environments. By explaining these methods and the process, it can benefit future visualization designers to help overcome similar challenges in cyber security or alternative domains.     

Experimental study of diffusion-based extraction from a cell suspension

A recently proposed application of microfluidics is the post-thaw processing of biological cells. Numerical simulations suggest that diffusion-based extraction of the cryoprotective agent dimethyl sulfoxide (DMSO) from blood cells is viable and more efficient than centrifugation, the conventional method of DMSO removal. In order to validate the theoretical model used in these simulations, a prototype was built and the flow of two parallel streams, a suspension of Jurkat cells containing DMSO and a wash stream that contained neither cells nor DMSO, was characterized experimentally. DMSO transport in a rectangular channel (depth 500 μm, width 25 mm and overall length 125 mm) was studied as a function of three dimensionless parameters: depth ratio of the streams, cell volume fraction in the cell solution, and the Peclet number (Pe) based on channel depth, average flow rate and the diffusion coefficient for DMSO in water. In our studies, values of Pe ranged from O(10³) to O(10⁴). Laminar flow was ensured by keeping the Reynolds number between O(1) and O(10). Experimental results based on visual and quantitative data demonstrate conclusively that a microfluidic device can effectively remove DMSO from liquid and cell laden streams without compromising cell recovery. Also, flow conditions in the microfluidic device appear to have no adverse effect on cell viability at the outlet. Further, the results demonstrate that we can predict the amount of DMSO removed from a given device with the theoretical model mentioned previously.