Mean residence time of gas in mechanically agitated gas–liquid contactors

In the present study of gas–liquid contactors, mean residence/contact time was calculated from knowledge of superficial velocity and the gas phase hold-up, for various gas rates and impeller geometry and speeds, and compared with values obtained from RTD measurements. A new correlation, involving Flow Number, Froude Number, system geometry and the physical properties, is proposed. This uses the authors data and those available in literature.     

Multi-site phase transfer catalyst assisted radical polymerisation of glycidyl methacrylate using potassium peroxydisulphate as initiator – a kinetic study

In this work, the kinetics and mechanism of free-radical polymerisation of glycidyl methacrylate (GMA) using potassium peroxydisulphate (PDS) as water soluble initiator in the presence of synthesized 1, 4-Bis (tributyl methyl ammonium) benzene dichloride (TBMABDC) as multi-site phase transfer catalyst (MPTC) was studied. The polymerisation reactions were carried out under inert and unstirred conditions at constant temperature of 60 ± 1°C in cyclohexane/water biphase media. The role of concentrations of monomer, initiator, catalyst and volume fraction of aqueous phase, solvent polarity and temperature on the rate of polymerisation (Rp) was ascertained. The order with respect to monomer and initiator was found to be unity. The order with respect to catalyst was found to be 0.51. The rate of polymerisation is independent of ionic strength and pH of the medium. However, an increase in the polarity of solvent has slightly increased the Rp value. Based on the results obtained, a suitable kinetic scheme has been proposed to account for the experimental observations and its significance discussed.     

Solar/UV-induced photocatalytic degradation of three commercial textile dyes.

The photocatalytic degradation of three commercial textile dyes with different structure has been investigated using TiO(2) (Degussa P25) photocatalyst in aqueous solution under solar irradiation. Experiments were conducted to optimise various parameters viz. amount of catalyst, concentration of dye, pH and solar light intensity. Degradation of all the dyes were examined by using chemical oxygen demand (COD) method. The degradation efficiency of the three dyes is as follows: Reactive Yellow 17(RY17) > Reactive Red 2(RR2) > Reactive Blue 4 (RB4), respectively. The experimental results indicate that TiO(2) (Degussa P25) is the best catalyst in comparison with other commercial photocatalysts such as, TiO(2) (Merck), ZnO, ZrO(2), WO(3) and CdS. Though the UV irradiation can efficiently degrade the dyes, naturally abundant solar irradiation is also very effective in the mineralisation of dyes. The comparison between thin-film coating and aqueous slurry method reveals that slurry method is more efficient than coating but the problems of leaching and the requirement of separation can be avoided by using coating technique. These observations indicate that all the three dyes could be degraded completely at different time intervals. Hence, it may be a viable technique for the safe disposal of textile wastewater into the water streams.     

Effect of organic dopants on electrodeposition and characteristics of polyaniline under the varying influence of H2SO4 and HClO4 electrolyte media

Electrodeposition of conducting polyaniline (Pani) was made under potentiostatic condition at pH 1.0 in different electrolyte media (H₂SO₄ and HClO₄) in the absence and presence of two organic dopants, disodium salts of naphthalene-1,5-disulphonic acid (NSA) and of catechol-3,5-disulphonic acid (CSA). The rate and yield of Pani deposition were dependent on the acid medium and the dopant employed. NSA in H₂SO₄ caused an increase in rate and yield but CSA decrease when compared to the rate and yield of H₂SO₄ alone. In HClO₄ medium, both the dopants showed a decrease. With regard to DC electrical conductivity, both the dopants exhibited an enhancement in H₂SO₄ medium but NSA a decline in HClO₄. Characterisation of the electrosynthesised polymer samples by various instrumental techniques (cyclic voltammetric: CV, FTIR, UV-Visible: UV-Vis, EPR, XRD, TGA and DTG methods) revealed that between the two acid media, H₂SO₄ was the better one. Further, it enlightened the role of two organic dopants in relation to the acid media. The advantageous role of NSA in H₂SO₄ had origin on its molecular characteristics such as non-polarity, larger π-electron cloud etc., while CSA could not perform such a role because of its easily oxidisable hydroxyl groups. In HClO₄, however, both the dopants could play only an unfavourable role owing to its greater polarity and oxidizing power than H₂SO₄.     

Halogen-free acylation of toluene over FeSBA-1 molecular sieves

Three-dimensional cage type iron substituted mesoporous silica with different iron contents (FeSBA-1) was synthesized in a highly acidic media using cetyltriethylammonium bromide and tetraethylorthosilicate as a template and a silica source, respectively. Acylation of toluene with acetic anhydride (AA) was carried out over FeSBA-1 mesoporous catalysts with different n_Si/n_Fe ratios in the temperature range 80–180 °C for a time-on-stream of 1–6 h under liquid phase conditions. The important factors affecting the conversion and the selectivity of the reaction, such as the reaction temperature, feed ratio, catalyst weight and time-on-stream were studied and the results are discussed in detail. The reaction conditions were optimized and the n_AA/n_Toluene ratio of 2 and catalyst weight of 0.1 g (3.3 wt% of total reaction mixture) were maintained for all catalytic runs. It was found that the catalytic activity is strongly influenced by the amount of tetrahedral iron in the catalysts. Among the catalysts used in the present study, FeSBA-1(36) showed a high toluene conversion and selectivity to p-methylacetophenone (p-MAP) under the optimized reaction conditions. It was also found that the selectivity for p-MAP was always higher than m-MAP and o-MAP for all the catalysts and the activity of the catalysts changes in the following order: FeSBA-1(36) > FeSBA-1(90) > FeSBA-1(120).     

Vapor-Phase Isopropylation of Phenol over Fe-Containing Al-MCM-41 Molecular Sieves

Al-MCM-41 and Fe-containing MCM-41 molecular sieves are hydrothermally synthesized. The low-angle XRD analysis shows that iron incorporation in Al-MCM-41 retains the hexagonal structure of MCM-41. The higher d-spacing values of Fe-Al-MCM-41 catalysts than those of Al-MCM-41 indicate the incorporation of iron into the framework. The mesoporous nature of the materials was confirmed by nitrogen adsorption isotherms. Electron paramagnetic resonance (EPR) and diffuse reflectance spectra (DRS) techniques confirm the tetrahedral coordination of iron into the Al-MCM-41 framework. Acidity of the synthesized catalysts was analyzed by both TPD of ammonia and pyridine-adsorbed FT-IR spectroscopy. The acidity measurements indicate that iron incorporation increases both Lewis and Brønsted acidity of the catalysts. Vapor-phase isopropylation of phenol with the new'alkylating agent isopropyl acetate was carried over the H-forms of the above catalysts. The phenol to isopropyl acetate ratio of 1?:?2 and the phenol space velocity of 1.1 h^-1 were found to be the optimum conditions for better phenol conversion and para isomer (4-isopropyl phenol) selectivity. On comparison, the Fe-incorporated Al-MCM-41 catalysts show significantly higher phenol conversion and selectivity toward the important product 4-isopropyl phenol (4-IPP) may be due to stronger Brønsted acid sites generated by the strengthening effect of nearby Lewis acid sites. Further, the undesired and dialkylated products selectivity are found to be lower over Fe-incorporated Al-MCM-41 than pure Al-MCM-41 catalysts.     

Measurement of AC conductivity and dielectric properties of flexible conductive styrene–butadiene rubber‐carbon black composites

Flexible conductive polymer composites were prepared using styrene–butadiene rubber (SBR) as a matrix and conductive carbon black as filler. The filler loading was varied from 10 to 60 phr. The effect of frequency, filler loading, temperature, and applied pressure on the AC conductivity, permittivity, and loss factor of the composites was studied. The AC conductivity of low and high loaded composites was found to be frequency dependent and independent respectively. The permittivity and the loss factor were continuously decreasing with increasing frequency. The increase in filler loading increased the AC conductivity, dielectric constant, and loss factor of the composites. Increase in temperature imposed increase in conductivity and permittivity of the composites. With increasing applied pressure the properties showed exponential increase. The effect of time under a constant compressive stress was studied and dielectric relaxation times were evaluated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 986–995, 2007     

Evaluation of realtime people tracking for indoor environments using ubiquitous motion sensors and limited wireless network infrastructure

We present the development and evaluation of a realtime indoor localisation system for tracking people. Our aim was to track a person’s indoor position using dead-reckoning, while limiting position error without depending on extensive wireless network infrastructure. The Indoor People Tracker used wearable motion sensors, a floor-plan map and a limited wireless sensor network for proximity ranging. We evaluated how the position accuracy of the Indoor People Tracker was affected by floor-plan map features, wireless proximity range and motion information. The advantage of the Indoor People Tracker was found; it was able to achieve accurate position resolution with minimal error, while not depending on wireless proximity.     

Association Rule Mining Frequent-Pattern-Based Intrusion Detection in Network

In the network security system, intrusion detection plays a significant role. The network security system detects the malicious actions in the network and also conforms the availability, integrity and confidentiality of data information resources. Intrusion identification system can easily detect the false positive alerts. If large number of false positive alerts are created then it makes intrusion detection system as difficult to differentiate the false positive alerts from genuine attacks. Many research works have been done. The issues in the existing algorithms are more memory space and need more time to execute the transactions of records. This paper proposes a novel framework of network security Intrusion Detection System (IDS) using Modified Frequent Pattern (MFP-Tree) via K-means algorithm. The accuracy rate of Modified Frequent Pattern Tree (MFPT)-K means method in finding the various attacks are Normal 94.89%, for DoS based attack 98.34%, for User to Root (U2R) attacks got 96.73%, Remote to Local (R2L) got 95.89% and Probe attack got 92.67% and is optimal when it is compared with other existing algorithms of K-Means and APRIORI.     

Non‐fragile reliable control synthesis of the sugarcane borer

This study considers the problem of non‐fragile reliable control synthesis for mathematical model of interaction between the sugarcane borer (Diatraea saccharalis) and its egg parasitoid Trichogramma galloi. In particular, the control could be substituted by periodic releases of a small population of natural enemies and hence it is important to propose the time‐varying controller in sugarcane borer. The main aim of this study is to design a state feedback non‐fragile (time‐varying) reliable controller such that the states of the sugarcane borer system reach the equilibrium point within the desired period. A novel approach is proposed to deal with the uncertain matrices which appear in non‐fragile reliable control. Finally, simulations based on sugarcane borer systems are conducted to illustrate the advantages and effectiveness of the proposed design technique. The result reveals that the proposed non‐fragile control provides good performance in spite of periodic releases of a small population of natural enemies occurs.Inspec keywords: microorganisms, plant diseases, biology computing, state feedback, biocontrol, control system synthesisOther keywords: nonfragile reliable control synthesis, sugarcane borer, mathematical model, Diatraea saccharalis, egg parasitoid, Trichogramma galloi, periodic releases, natural enemies, state feedback nonfragile time‐varying reliable controller, equilibrium point, design technique