Effects of Substrate Temperatures on the Structure and UV-shielding Properties of TiO_2-CeO_2 Films Deposited on Glass by Radio-frequency Magnetron Sputtering

1Introduction Theultravioletrays(UV)insunlight(-4%)cantransmitintoroomthroughcommonfloatglass,theUVcanmakethematerialsintheroom,eg,paper,furni ture,textilefabricandplastics,becoloredanddeterio rated.ShieldingfromUVirradiationisofinterestinmanyfields.Formu…     

钛酸钡基铁电材料的介电非线性研究

通过A位或B位掺杂改性得到的钛酸钡基铁电材料,在外加直流偏置电场作用下,具有介电常数非线性可调的优异介电性能,可以广泛地应用于压控可调陶瓷电容器和微波可调器件领域。针对钛酸钡基铁电材料的介电非线性特性,讨论了BaTiO_3基铁电材料分别在铁电相、顺电相以及相转变温度场附近的介电非线性机理和相关理论;结合笔者近年来有关介电非线性研究的实验结果和相关文献报道,综述了不同A位离子(如Sr~(2-)和Ca~(2-)等)或B位离子(如Zr~(4 )和Sn~(4-)等)掺杂的BaTiO_3基铁电材料体系的介电非线性研究现状,分别对不同物质形态(陶瓷块体、薄膜和厚膜)的BaTiO_3基铁电材料的介电非线性研究及其应用进行了对比分析;并对钛酸钡基铁电材料今后的发展趋势和研究方向进行了展望。     

基于单片机和组态软件的电子节气门控制系统

针对电子节气门的控制,以ATMEG16L单片机为核心,设计了电子节气门控制系统,并通过MCGS组态软件与单片机之间的通信,显示控制结果。实验表明利用单片机完成的控制系统可以满足控制要求。     

Improved visible transparency of SIO<Subscript>2</Subscript>/ZNO:AL /CEO<Subscript>2</Subscript>-TIO<Subscript>2</Subscript>/SIO<Subscript>2</Subscript> multilayer films with high UV absorption and infrared reflection rate

New visible transparent, UV absorption, and high infrared reflection properties have been realized by depositing multilayer SiO₂/ZnO: Al/CeO₂-TiO₂/SiO₂ films onto glass substrates at low temperature by radio frequency magnetron sputtering. Optimum thickness of SiO₂, ZnO: Al (ZAO) and CeO₂-TiO₂ (CTO) films were designed with the aid of thin film design software. The degree of antireflection can be controlled by adjusting the thickness and refractive index. The outer SiO₂ film can diminish the interference coloring and increase the transparency; the inner SiO₂ film improves the adhesion of the coating on the glass substrate and prevents Ca²⁺, Na⁺ in the glass substrate from entering the ZAO film. The average transmittance in the visible light range increases by nearly 18%-20%, as compared to double layer ZAO/CTO films. And the films display high infrared reflection rate of above 75% in the wavelength range of 10-25 μm and good UV absorption (> 98%) properties. These systems are easy to produce on a large scale at low cost and exhibit high mechanical and chemical durability. The triple functional films with high UV absorption, antireflective and high infrared reflection rate will adapt to application in flat panel display and architectural coating glass, automotive glass, with diminishing light pollution as well as decreasing eye fatigue and increasing comfort.     

Effects of PSMA and experimental conditions on the morphologies of BaCO3 whiskers

BaCO3 whiskers exhibiting different morphologies were fabricated by a simple precipitation reaction of barium ch/oride with sodium carbonate in the absence and presence of poly-（styrene-alt-maleic acid） （PSMA） as a crystal growth modifier at room temperature. The as-prepared products were characterized by scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, and X-ray diffraction （XRD）. The influences of experimental parameters on the size and morphology of BaCO3 whiskers were investigated and discussed. It was found that the as-prepared BaCO3 whiskers are single crystals with diameter ranging from 100 to 300 run, and grow along the crystallographic a-axis or [100] direction. BaCO3 whiskers with different morphologies, such as branching and dendritic structure, can be obtained depending on the experimental conditions. With increasing PSMA concentration, the diameter of BaCO3 whiskers decreases.     

Web上多层Client/Server数据库系统的设计与实现

文章探讨了当今处于Internet技术前沿的可用的远程数据库编程技术,并分析了Web上多层Client／Server数据库系统的原理和结构.提出了一种Web上多层Client／Server数据库系统的解决方案,详述了系统实现的具体方法,以及开发过程中所要解决的关键问题,并实现了主讲教师优秀教案远程参考系统.     

Two-step anodization of maltilayer TiO2 nanotube and its photocatalytic activity under UV light

A double-layer TiO2 nanotube arrays were formed by two-step anodization of Ti foils in different electrolytes. First, Ti in 0.5 wt% HF was anodized to form thin nanotube layer. Afterwards a second anodization was conducted in a formamide based electrolyte, which allowed the second layer of nanotube growing directly underneath the first one. From FESEM investigation we found that the thickness of second layer corresponded to the anodization time, the increasing of which would lead to the excessive etching on the first layer. The first layer protected the lower one from fluoride corrosion during anodization process. The double layer TiO2 nanotube arrays showed no benefit to photodegradation effect in methyl orange degradation experiments.     

Effect of heat-treatment on crystalline phase and UV absorption of 60CeO2-40TiO2 thin films by magnetron sputtering

60CeO2-40TiO2 thin films were deposited on soda-lime silicate glass substrates by R.F. magnetron sputtering. The effects of heat-treatment on the UV-absorption of the thin films were studied on the 60CeO2-40TiO2 thin film with the largest UV cut-off wavelength. The sample films with CeO2:TiO2=60:40 were heated at 773 K, 873 K, 973 K for 30 min. These films are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy and spectrometer (XPS). XRD analysis proves that the addition of TiO2 to CeO2 changed the crystalline state of CeO2. But the UV absorption effect of CeO2-TiO2 films with CeO2 crystallite phase is inferior to that of the amorphous phase CeO2-TiO2 films. XPS analysis also indicates that the amorphous phase CeO2-TiO2 films have the most Ce3+ content in these films. Amorphous phase and crystalline phase of the CeO2-TiO2 films have different effects on UV absorption of the thin films.     

Operation speed limited by the electric properties of?the?photorefractive spatial light modulator

With excellent photo-electric and electro-optical effects, the photorefractive spatial light modulators can work as optically addressed modulators in optical information processing systems and parallel optical computing systems. The photo-induced current pulses of the photorefractive spatial light modulator observed in the experiments are analyzed to conclude the characteristics, and to find the relationship between the properties of the current pulse and the structural parameters. Furthermore, the origin of the photo-induced current pulse is analyzed, and the methods to improve the operation speed of the spatial light modulators are proposed. The research results will be significant for extending the applications of the photorefractive spatial light modulators, and pushing ahead the research of all-optical modulation materials and devices for optical supercomputing.     

The Influence of Annealing Temperature on the Structure and Properties of TiO2 Films Prepared by Sputtering

The TiO₂ films were prepared on slides by dc reactive magnetron sputtering, then the samples were annealed at 300°C, 350°C, 400°C, 450°C, 500°C and 550°C, respectively. X-ray diffraction (XRD) was used to obtain the TiO₂ film crystalline structure; X-ray photoelectron spectroscopy (XPS) was used to study the film surface stoichiometries; surface morphologies were studied by scanning electron microscopy (SEM); the contact angle was tested to indicate the TiO₂ film wettability; and the photocatalytic activity testing was conducted to evaluate the photocatalysis properties. The photocatalytic activity and contact angle testing results were correlated with the crystallinity, surface morphologies and surface ·OH concentration of TiO₂ films. The samples with a higher polycrystalline anatase structure, rough surface and high ·OH concentration displayed a better photoinduced hydrophilicity and a stronger photocatalysis. Funded by the National “863” Project Foundation (No. 2003LG0034)