A thermal perspective of flash sintering: The effect of AC current ramp rate on microstructure evolution

In flash sintering experiments, the thermal history of the sample is key to understanding the mechanisms underlying densification rate and final properties. By combining robust temperature measurements with current-ramp-rate control, this study examined the effects of the thermal profile on the flash sintering of yttria-stabilized zirconia, with experiments ranging from a few seconds to several hours. The final density was maximized at slower heating rates, although processes slower than a certain threshold led to grain growth. The amount of grain growth observed was comparable to a similar conventional thermal process. The bulk electrical conductivity correlated with the maximum temperature and cooling rate. The only property that exhibited behavior that could not be attributed to solely the thermal profile was the grain boundary conductivity, which was consistently higher than conventional in flash sintered samples. These results suggest that, during flash sintering, athermal electric field effects are relegated to the grain boundary.     

An expert aid to fault diagnosis and trouble-shooting in satellitecommunications

Presents the Satellite Communications Network Expert (SaNE), a knowledge-based aid designed to provide engineering support for fault diagnosis. The SaNE is composed of two elements: a satcom network model, which simulates the structure and functionality of a system based loosely upon a large military satcom network, and a diagnostic component, which uses knowledge- and model-based reasoning techniques to analyse system anomalies and diagnose possible causes for the alarms such networks generate. The development cycle is described, emphasising lessons learnt during development and testing and the advantages and disadvantages of the techniques applied. The goal of the SaNE project is primarily commercial acceptance rather than innovation. The authors illustrate how novel concepts can be implemented in a practical system without compromising this goal     

Autoimmunity caused by disruption of central T cell tolerance. A murine model of drug-induced lupus

A side effect of therapy with procainamide and numerous other medications is a lupus-like syndrome characterized by autoantibodies directed against denatured DNA and the (H2A-H2B)-DNA subunit of chromatin. We tested the possibility that an effect of lupus-inducing drugs on central T cell tolerance underlies these phenomena. Two intrathymic injections of procainamide-hydroxylamine (PAHA), a reactive metabolite of procainamide, resulted in prompt production of IgM antidenatured DNA antibodies in C57BL/6xDBA/2 F1 mice. Subsequently, IgG antichromatin antibodies began to appear in the serum 3 wk after the second injection and were sustained for several months. Specificity, inhibition and blocking studies demonstrated that the PAHA-induced antibodies showed remarkable specificity to the (H2A-H2B)-DNA complex. No evidence for polyclonal B cell activation could be detected based on enumeration of Ig-secreting B cells and serum Ig levels, suggesting that a clonally restricted autoimmune response was induced by intrathymic PAHA. The IgG isotype of the antichromatin antibodies indicated involvement of T cell help, and proliferative responses of splenocytes to oligonucleosomes increased up to 100-fold. As little as 5 microM PAHA led to a 10-fold T cell proliferative response to chromatin in short term organ culture of neonatal thymi. We suggest that PAHA interferes with self-tolerance mechanisms accompanying T cell maturation in the thymus, resulting in the emergence of chromatin-reactive T cells followed by humoral autoimmunity.     

Cure of malignant ascites and generation of protective immunity by monoclonal antibody-targeted activation of a glucuronide prodrug in rats

We examined the in vivo efficacy of targeting beta-glucuronidase (betaG) to activate a glucuronide prodrug (BHAMG) of p-hydroxyaniline mustard (pHAM) at hepatoma ascites in Sprague-Dawley rats. Injection i.p. of 500 microg RH1-betaG, a conjugate formed between recombinant betaG and monoclonal antibody RH1 with specificity for an antigen expressed on AS-30D rat hepatoma cells, into rats bearing AS-30D ascites resulted in the accumulation of 54 microg conjugate per 10(9) tumor cells after 2 hr. Ascites fluid and serum contained 0.53 and 0 microg/ml, respectively, RH1-betaG 2 hr after injection of the conjugate. Conjugate binding to AS-30D cells was heterogeneous and non-saturated, as determined by flow cytometry. BHAMG was less toxic than pHAM to SD rats based on measures of animal mortality, weight loss and hematological toxicity. Treatment of rats bearing established hepatoma ascites with 500 microg RH1-betaG followed 2 hr later with a single i.p. injection of 30 mg/kg BHAMG or 3 i.p. injections of 10 mg/kg BHAMG 2, 3 and 4 hr later resulted in the cure of 6/8 and 8/8 animals, respectively. Treatment with BHAMG or pHAM alone did not produce cures, whereas treatment with a control antibody-betaG conjugate and BHAMG produced significantly greater hematological toxicity compared to treatment with RH1-betaG and BHAMG. All cured rats were completely protected from rechallenge with 2 x 10(7) AS-30D cells, indicating that successful treatment of animals induced protective immunity.     

Partial congenital defect of the left pericardium: angiographic diagnosis and treatment by thoracoscopic pericardiectomy: case report

Twenty-six patients with an intracardiac myxoma underwent surgical resection at our institution from 1977 through 1992. Left atrial myxoma was diagnosed in 22 patients, left ventricular in 1, right atrial in 2, and right ventricular in 1. Six patients were asymptomatic; preoperative symptoms included dyspnea, arrhythmias, embolic episodes, and syncope. The diagnosis was established with transthoracic echocardiography in all cases but one. Surgery was performed in all cases with the aid of cardiopulmonary bypass with moderate hypothermia and cold crystalloid cardioplegia. One patient with a left ventricular myxoma died in a comatose state during the immediate postoperative period. Long-term clinical and echocardiographic evaluation was performed in 19 patients; results were excellent (all the patients were in New York Heart Association functional class I or II), and no recurrences were documented. The clinical characteristics, diagnostic methods, and surgical approach are presented and discussed.     

Influence of interfacial microcracks on the elastic properties of composites

A model is established to quantify the influence of interfacial microcracks on the elastic properties of a particulate composite using a combination of theoretical and finite element analysis. A unique way to construct physical models which could accommodate both crack size and crack density is proposed. Based on energy principles, the influence of a dilute concentration of interfacial microcracks is first studied. The case of a finite concentration of microcracks is solved subsequently by combining the dilute concentration solutions and the differential scheme. Both cases agreed well with existing composite theories for the limiting condition of complete decohesion. The final model predicts the effective elastic properties as functions of both crack size and microcrack density.     

On upgrading the numerics in combustion chemistry codes

A method of updating and reusing legacy FORTRAN codes for combustion simulations is presented using the DAEPACK software package. The procedure is demonstrated on two codes that come with the CHEMKIN-II package, CONP and SENKIN, for the constant-pressure batch reactor simulation. Using DAEPACK generated code, analytical derivative calculations, sparsity pattern information, and hidden discontinuity information can be obtained for the models of interest. This information can be easily integrated with different solvers giving the modeler great flexibility in selecting the best solution procedure. Using the generated code, the CONP code was connected to three different solvers, and the SENKIN code was connected to two different solvers. The effect of model formulation, analytical derivatives, sparsity, and sensitivity equation solution method were analyzed for three large kinetic mechanisms for methane, acetylene, and n-heptane. For the n-heptane model, with 544 species and 2446 reactions, a factor of 10-speed improvement over the original solution procedure was found using analytical derivatives and sparse linear algebra. For sensitivity calculations, for a small number of parameters, a factor of 55 improvement over the original solution procedure was found for the n-heptane problem. Upon closer examination of results, no one method is found to always be superior to other methods, and selection of the appropriate solution procedure requires an examination of the specific kinetic mechanism, which is easily conducted using DAEPACK generated code.     

Analysis of polar compound classes in SRC-II liquids: Comparison of non-aqueous titrametric,i.r. spectrometric and h.p.l.c. methods

Results for various types of polar compounds in SRC-11 coal-derived liquids and other fuels were obtained by one or more of the three analytical methods: non-aqueous titration, i.r. spectroscopy and h.p.l.c. Practical aspects as well as precision, accuracy and assumptions necessary for effective application of each of the methods are discussed. H.p.l.c. is applicable to the widest variety of compound types, is the most rapid, most sensitive and shows the best promise for increased development and improvement. Application and development of these techniques is a logical step toward improving process monitoring, catalyst development, toxicological screening and general fuel analysis.     

ELECTRICALLY CONDUCTING GLASSES*

Glasses containing lead, bismuth, or antimony oxides or combinations of these become conducting after several hours’ reduction in hydrogen. The electronic surface conductivity is both stable and reproducible. The magnitude of the conductivity depends on the nature and amounts of the reducible oxides, the temperatures at which reduction is carried out, and the electrical influence of the nonreduced portions of the glasses.