Structural Characterization of Different Asphaltenes of Kuwaiti Origin

Asphaltenes obtained by precipitation from crude Kuwaiti oils have been analyzed by proton magnetic resonance (¹H-NMR), carbon-13 nuclear magnetic resonance (¹³C-NMR) and Infrared (IR) spectral techniques. The molecular weight and elemental analysis were also determined. These combined analytical data were used for the characterization of these Kuwaiti oils. The asphaltenes molecular weights range from approximately 4200-6500 with an H/C ratio of 0.91-1.1 with an average 45-71% aromatic carbons. The average side chain length was of 4-6 carbons. It can also be concluded that the asphaltenes under investigation contain 5-9 sets of condensed aromatic rings joined together by bridges of alkyl chains or other hetero atoms and the average number of each of these sets of condensed aromatic rings is nearly 7. There are a number of alicyclic rings and condensed alicyclic rings in asphaltene. The IR spectra showed main molecular groups including OH, NH, SH, C=O and aliphatic and aromatic C-H's.     

An experimental study of a cross-flow type plate heat exchanger for dehumidification/cooling

The thermal and dehumidification behaviour of a standard cross-flow type plate heat exchanger, intended for use as a dehumidifier/cooler, has been investigated both experimentally and numerically. Three sets of experiments have been carried out where air is blown into the primary and secondary sides of the exchanger, while water and liquid desiccant were being sprayed in a counter flow arrangement. The first set represents the indirect evaporative cooling of the primary stream by the secondary air stream. The second set is with liquid desiccant only and no indirect evaporative cooling. In the third set of experiments the primary air stream is indirectly evaporatively cooled by the secondary air stream and dehumidified by the liquid desiccant sprayed into the primary side of the exchanger. The above experiments indicate that the heat exchanger performs well when used with liquid desiccant. Furthermore, for an exchanger angle of 45°, there is an optimum value of air mass flow rate at which the effectiveness and dehumidification efficiency of the plate heat exchanger are maxima. To investigate the effect of the ambient air conditions on the PHE performance, further experiments were carried out using a heater element and a humidifier. The results show that under laboratory conditions the exchanger effectiveness and dehumidification efficiency increase with increasing primary air inlet temperature and humidity ratio. The experimental results were used to validate a computer model developed for the cross-flow type plate heat exchanger/dehumidifier. Comparison indicates that the numerical results are in good agreement with the experiments.     

Harmonic and intermodulation performance in an R-LED series network

Analytical expressions are obtained for predicting the harmonic and intermodulation performance of R-LED series networks. These expressions are in terms of the ordinary Bessel functions with arguments depenedent on the modulation index.     

Mechanical characterization and modeling stress relaxation behavior of acrylic–polyurethane-based graft-interpenetrating polymer networks

The stress relaxation behavior of acrylic–polyurethane (PU)-based graft-interpenetrating polymer networks (IPNs) was characterized via dynamic mechanical analysis (DMA) and modeled using finite element method (FEM) analysis. Stress relaxation of glassy IPN specimens was experimentally studied under flexural testing, while rubbery IPN specimens were tested in tension. The effects of varying the styrene content in the acrylic copolymer phase, compatibility of the two phases in IPNs, and changing the concentration of acrylic copolymer and PU were studied. A higher percentage of styrene content resulted in higher homogeneity of IPN specimens, and decrease in initial modulus for acrylic copolymer specimens. Additionally, glassy IPN specimens with 90% styrene shows resistance to relaxation as high as acrylic copolymer samples. Experimental results were used to develop a numerical model to study stress relaxation response of specimens. While polymer systems have been studied computationally, numerical modeling of IPN systems is still in its infancy. A three-dimensional FEM model was developed using the Generalized Maxwell model and four-term Prony series constants, which were extracted from the stress relaxation experiments. With four terms in the Prony series, a good match was observed between experimental observations and results from the FEM model.     

Preparation and characterization of poly(vinyl alcohol)/gum tragacanth/cellulose nanocomposite film

The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film.     

On ℤ2ℤ2[u]-additive codes

In this paper, a new class of additive codes which is referred to as ?₂ ?₂[u]-additive codes is introduced. This is a generalization towards another direction of recently introduced ?₂ ?₄-additive codes [J. Borges, C. Fernández-Córdoba, J. Pujol, J. Rif´a, and M. Villanueva, ?₂ ?₄-linear codes: Generator matrices and duality, Designs Codes Cryptogr. 54(2) (2010), pp. 167–179]. ?₂ ?₄-additive codes have shown to provide a promising class of codes with their algebraic structure and applications such as steganography. The standard generator matrices are established and by introducing orthogonality the parity-check matrices are also obtained. A MacWilliams-type identity that relates the weight enumerator of a code with its dual is proved. Furthermore, a Gray map that maps these codes to binary codes is defined and some examples of optimal codes which are the binary Gray images of ?₂ ?₂[u]-additive codes are presented.     

Cross level semantic similarity: an evaluation framework for universal measures of similarity

Semantic similarity has typically been measured across items of approximately similar sizes. As a result, similarity measures have largely ignored the fact that different types of linguistic item can potentially have similar or even identical meanings, and therefore are designed to compare only one type of linguistic item. Furthermore, nearly all current similarity benchmarks within NLP contain pairs of approximately the same size, such as word or sentence pairs, preventing the evaluation of methods that are capable of comparing different sized items. To address this, we introduce a new semantic evaluation called cross-level semantic similarity (CLSS), which measures the degree to which the meaning of a larger linguistic item, such as a paragraph, is captured by a smaller item, such as a sentence. Our pilot CLSS task was presented as part of SemEval-2014, which attracted 19 teams who submitted 38 systems. CLSS data contains a rich mixture of pairs, spanning from paragraphs to word senses to fully evaluate similarity measures that are capable of comparing items of any type. Furthermore, data sources were drawn from diverse corpora beyond just newswire, including domain-specific texts and social media. We describe the annotation process and its challenges, including a comparison with crowdsourcing, and identify the factors that make the dataset a rigorous assessment of a method’s quality. Furthermore, we examine in detail the systems participating in the SemEval task to identify the common factors associated with high performance and which aspects proved difficult to all systems. Our findings demonstrate that CLSS poses a significant challenge for similarity methods and provides clear directions for future work on universal similarity methods that can compare any pair of items.     

Random resampling algorithms for addressing the imbalanced dataset classes in insider threat detection

International Journal of Information Security - Cybersecurity threats can be perpetrated by insiders or outsiders. The threats that could be carried out by insiders are far more serious due to...     

Hybrid image steganography method using Lempel Ziv Welch and genetic algorithms for hiding confidential data

Multidimensional Systems and Signal Processing - Digital images are commonly used in steganography due to the popularity of digital image transfer and exchange through the Internet. However, the...     

Estimation of magnitude and time duration of temporary overvoltages using ANN in transmission lines during power system restoration

In most countries, the main step in the process of power system restoration, following a complete/partial blackout, is energization of primary restorative transmission lines. Artificial neural network (ANN) is employed for performing a nonlinear input–output mapping in this work, in order to estimate the temporary overvoltages (TOVs) due to transmission lines energization. In the proposed methodology, Levenberg–Marquardt second order method is used to train the multilayer perceptron. Proposed ANN is trained with equivalent circuit parameters of the network as input parameters, trained ANN has therefore satisfactory generalization capability. Both single and three-phase line energizations are analyzed. The simulated results for 39-bus New England test system, indicate that the proposed technique can estimate the peak values and duration of switching overvoltages with acceptable accuracy.