Analytical formulae for calculating stresses in unidirectional/cross-ply unbalanced laminates

A multilayer theory has been developed for unidirectional/cross-ply unbalanced laminates subjected to surface shear tractions, using the assumption of plane strain. The analytical solution for the stress field in the laminate is obtained and it is shown that the stresses in each layer are in good agreement with the results of a three-dimensional finite element analysis. Approximate formulae for the analytical stresses are also derived for a laminate subjected to an offset distributed force at one end. The accuracy of this solution is shown by comparison with a three-dimensional finite element analysis.     

Electrosprayed and selenized Cu/In metal particle films

Nano-particulate copper and indium metal layers of 1-2 μm have been deposited by non-vacuum techniques such as doctor blade, screen printing and electrospray using alcoholic suspension pastes. Electrospray showed a high efficiency of material usage and yielded the most uniform morphology. The metal precursor layers were subjected to a thermal treatment (500-600 °C) in selenium vapor to convert the porous metal layers into CuInSe₂ compound layers. The chemical conversion, investigated by X-ray diffraction, showed the presence of the In₂O₃ impurity phase in the precursor as well as in the selenized layers.     

Stabilization techniques for spectral methods

We introduce a stabilized treatment of spectral methods. The condition number of the spectral systems is highly improved. Elliptic and biharmonic problems are considered. Suitable interpolants in the case of inhomogeneous Dirichlet boundary conditions are presented. For a direct solver the improvements with respect to rounding error propagation are numerically demonstrated.     

The use of quantitative bacteriologic assessment of bone

A new sub-class of binding protein-dependent transporter with specificity for a broad range of polar amino acids has been identified by sequence comparison, in Rhizobium leguminosarum, Rhodobacter capsulatus, Escherichia coli and Pseudomonas fluorescens. Southern blotting and PCR analysis has shown that transporters from this new sub-class are widely distributed in Gram-negative bacteria, including, in addition to the above, Citrobacter freundii, Erwinia carotovorum and Rhizobium meliloti. ABC transporters of polar amino acids can be divided into two groups: those with narrow solute specificity and the newly identified sub-class with broad solute specificity. The binding and inner membrane proteins from transporters with a broad solute specificity are larger by approximately 30% than those with a narrow solute specificity. Multiple alignment of the inner membrane proteins from all sequenced polar amino acid transporters indicates there is an N-terminal conserved region that may be involved in solute specificity. A conserved arginine or lysine at residue 30 of this region is changed to glutamate in arginine transporters. Residue 53 also has a strong correlation with the charge on the transported solute, with basic amino acid transporters replacing an aliphatic amino acid at this position with a negatively charged amino acid. The general amino acid permease from R. leguminosarum, which will transport aliphatic as well as basic and acidic amino acids, juxtaposes two prolines at residues 52 and 53 of the N-terminal conserved region.     

Phase I trial of inhaled natural interleukin 2 for treatment of pulmonary malignancy: toxicity, pharmacokinetics, and biological effects

Safety, local and systemic immunomodulation, and tumor response to treatment with aerosolized natural interleukin 2 (nIL-2) applied five times a day were studied in a Phase I trial in 16 patients with pulmonary malignancies refractory to conventional therapy. The toxicity of inhaled nIL-2 was different from that observed after systemic administration. Reversible airway irritation causing a nonproductive cough represented the dose-limiting toxicity. Mild to moderate reduction of the vital capacity and forced expiratory volume (FEV1) with minor effects on relative FEV1, peak expiratory flow, airway resistance, and PaO2 was experienced by individual patients. In 14 patients suffering from pulmonary metastases due to renal cell cancer, one durable complete response, one partial response, and one mixed response were observed. Inhalation of nIL-2 aerosol resulted in a dose-dependent expansion of pulmonary immunocompetent cells in bronchoalveolar lavage fluid. Posttreatment bronchoalveolar lavage showed an activated lymphocyte phenotype with increased HLA-DR expression. The only systemic biological effect detectable in peripheral blood was a marked increase of soluble interleukin 2 receptor serum levels. We conclude that treatment with aerosolized nIL-2 is an effective means for site-specific immunomodulation and deserves further investigation for the treatment of malignant and inflammatory lung disease.     

Purification and characterization of an endopeptidase from Lactobacillus delbrueckii subsp. bulgaricus B14

An intracellular endopeptidase was purified from cell-free extracts of Lactobacillus delbrueckii subsp. bulgaricus B14 by anion exchange chromatography on DEAE-Sepharose, hydroxyapatite chromatography, second anion exchange chromatography on Mono-Q, and metal-chelating affinity chromatography. The endopeptidase was a monomer with a molecular mass of approximately 70 kDa determined by SDS-PAGE and gel filtration. Various oligopeptides (e.g. Met-enkephalin, bradykinin) were hydrolysed by the endopeptidase. Exopeptidase activity and cleavage of dipeptides or tripeptides was not observed. The K_M value for the cleavage of Metenkephalin was 1.2 mM. Temperature and pH optima were 47 °C and pH 7.7, respectively. The endopeptidase was inhibited by the classical agents for metal-dependent (EDTA) and serine (DFP) enzymes. Activity was increased by Co²⁺ and Mg²⁺, no effect was observed with Ca²⁺. After inhibition with EDTA, enzyme activity could be restored fully by Co²⁺. Activity was inhibited by Zn²⁺, Mn²⁺, Fe²⁺, Cu²⁺, Cd²⁺ and Hg²⁺. The N-terminal sequence of the endopeptidase was determined as: H₂N-Val-Arg-Gly-Gly-Ser-Gly-Asp-Thr-Thr-Val-0H.     

Small thermophotovoltaic prototype systems

In an earlier paper we reported on a small grid-connected thermophotovoltaic (TPV) system consisting of an ytterbia mantle emitter and silicon solar cells with 16% efficiency (under solar irradiance in standard test conditions, STCs). The emitter was heated up using a butane burner with a rated thermal power of 1.35 kW (referring to the lower heating value). This system produced an electrical output of 15 W, which corresponds to a thermal to electric (direct current) conversion efficiency of 1.1%. In the interim, further progress has been made, and significantly higher efficiencies have been achieved. The most important development steps are: (1) the infrared radiation-absorbing water filter between emitter and silicon cells (to protect the cells against overheating and against contact with flue gasses) has been replaced by a suitable glass tube. By doing this, it has been possible to prevent losses of convertible radiation in water. (2) Cell cooling has been significantly improved, in order to reduce cell temperature, and therefore increase conversion efficiency. (3) The shape of the emitter has been changed from spherical to a quasi-cylindrical geometry, in order to obtain a more homogeneous irradiation of the cells. (4) The metallic burner tube, on which the ytterbia emitter was fixed in the initial prototypes, has been replaced by a heat-resistant metallic rod, carrying ceramic discs as emitter holders. This has prevented the oxidation and clogging of the perforated burner tube. (5) Larger reflectors have been used to reduce losses in useful infrared radiation. (6) Smaller cells have been used, to reduce electrical series resistance losses. Applying all these improvements to the basic 1.35 kW prototype, we attained a system efficiency of 1.5%. By using preheated air for combustion (at approximately 370 °C), 1.8% was achieved. In a subsequent step, a photocell generator was constructed, consisting of high-efficiency silicon cells (21% STC efficiency). In this generator, the spaces between the cells were minimized, in order to achieve as high an active cell area as possible, while simultaneously reducing radiation losses. This new system has produced an electrical output of 48 W, corresponding to a system efficiency of 2.4%. This is the highest-ever-reported value in a silicon-cell-based TPV system using ytterbia mantle emitters. An efficiency of 2.8% was achieved by using preheated air (at approximately 500 °C). An electronic control unit (fabricated of components with low power consumption, and including a battery store) was developed, in order to make the TPV system self-powered. This unit controls the magnetic gas supply valve between gas supply cylinder and burner as well as the high-voltage ignition electrodes. Both the control unit’s own power consumption and the battery-charging power are supplied directly by the TPV generator. A small commercial inverter is used to transfer excess power to the 230 V grid.