Effects of SiN passivation and high-electric field on AlGaN-GaN HFET degradation

The authors report on the effects of silicon nitride (SiN) surface passivation and high-electric field stress (hot electron stress) on the degradation of undoped AlGaN-GaN power HFETs. Stressed devices demonstrated a decrease in the drain current and maximum transconductance and an increase in the parasitic drain series resistance, gate leakage, and subthreshold current. The unpassivated devices showed more significant degradation than SiN passivated devices. Gate lag phenomenon was observed from unpassivated devices and removed by SiN passivation. However, SiN passivated devices also showed gate lag phenomena after high-electric field stress, which suggests possible changes in surface trap profiles occurred during high-electric field stress test.     

An analytical model for I-V and small-signalcharacteristics of planar-doped HEMTs

An analytical current-voltage (I-V) model for planar-doped HEMTs is developed. This compact model covers the complete range of I-V characteristics, including the current saturation region and parasitic conduction in the electron-supplying layer. Analytical expressions for the small-signal parameters and current-gain cutoff frequency are derived from the I-V model. Modeling results for a 0.1-μm-gate planar-doped AlInAs-GaInAs HEMT show excellent agreement with measured characteristics. Threshold voltages and parasitic conduction in planar-doped and uniformly doped HEMTs are also compared and discussed     

Yeast sequencing reports. Isolation and sequence analysis of a gene from the linear DNA plasmid pPAC1–2 of Pichia acaciae that shows similarity to a killer toxin gene of Kluyveromyces lactis

The toxin-encoding linear plasmid systems found in Pichia acaciae and Kluyveromyces lactis yeasts appear to be quite similar, both in function and structural organization. By Southern hybridization, a linear plasmid of P. acaciae, pPac1–2, was found to hybridize to the second open reading frame (ORF2) of K. lactis plasmid pGKL1, known to encode the α and β subunits of the K. lactis toxin. A 1·7 kbp segment of pPac1–2 DNA was cloned, sequenced and shown to contain four regions of strong homology to four similarly oriented regions of K. lactis ORF2. This 1·7 kbp fragment also contained an ORF of 1473 bp that could encode a protein of ～ 55·8 kDa. Like the α subunit gene of K. lactis ORF2, a very hydrophobic region occurs at the N-terminus, perhaps representing a signal sequence for transport out of the cell. Unlike K. lactis ORF2, however, the encoded polypeptide is much smaller and lacks a recognizable domain common to chitinases. The structure of a toxin that includes the translation product of this P. acaciae ORF would likely be quite different from that of the K. lactis toxin. Analysis of the upstream region of the P. acaciae ORF revealed an upstream conserved sequence identical to that found before ORFs 8 and 9 of pGKL2. A possible hairpin loop structure, as has been described for each of the four K. lactis pGKL1 ORFs, was found just upstream of the presumed start codon. The similarity of the promoter-like elements found in the linear plasmid genes of these diverse yeasts reinforces the idea of the existence of a unique, but highly conserved, expression system for these novel plasmids. The sequence has been deposited in the GenBank data library under Accession Number U02596.     

High-speed modulation of InGaAs-GaAs strained-layer multiple-quantum-well lasers fabricated by chemically assisted ion-beam etching

Graded-index separate-confinement heterostructure (GRINSCH) strained-layer lasers with five In/sub 0.3/Ga/sub 0.7/As quantum wells have been fabricated with cavity lengths from 50 to 400 mu m using chemically assisted ion-beam etching (CAIBE) to form the laser mirrors. The dry-etching process is thermally assisted, which gives a reproducible etching rate. A minimum threshold-current value is observed at a cavity length of 50 mu m, showing that the multiquantum-well design is optimum for short-cavity lasers. A relaxation oscillation frequency of 10 GHz and a -3 dB bandwidth of 15 GHz have been measured on a 200*10 mu m mesa-structure device.<>     

The cloning and expression of human deoxyribonuclease II. A possible role in apoptosis

We have previously implicated deoxyribonuclease II (DNase II) as an endonuclease responsible for DNA digestion during apoptosis. The full-length human cDNA has now been cloned. The cDNA contains an open reading frame of 1078 bases coding for a 40-kDa protein. This protein is 10 kDa larger than commercially supplied enzyme, which has been proteolytically cleaved at an internal aspartate residue. The gene is located at chromosome 19p13.2, and has no significant homology to other human proteins, but has >30% identity to three predicted genes in Caenorhabditis elegans. To determine whether overexpression of DNase II induces apoptosis in Chinese hamster ovary cells, the cDNA was cotransfected with a plasmid encoding green fluorescent protein. Within 24 h, a significant proportion of green fluorescent protein-positive cells contained condensed chromatin, whereas vector-only controls remained viable. Considering that DNase II is normally active only at low pH, it was surprising that transfection induced chromatin condensation. To confirm that transfection was not activating another endonuclease, cells were incubated with the caspase inhibitor benzyloxycarbonyl-Val-Ala-Asp-(O-methyl)-fluoromethylketone; this failed to inhibit chromatin condensation induced by DNase II. These results demonstrate that DNase II acts downstream of caspase activation and that it may be activated by an as yet unknown mechanism to induce DNA digestion during apoptosis.     

SORPTION EQUILIBRIUM OF COPPER BY PARTIALLY-COAGULATED CALCIUM ALGINATE GEL

The sorption equilibrium of dissolved copper by spherical partially-coagulated gels of calcium alginate was investigated in this work. The gels were formed by dispensing a viscous algin (food grade sodium alginate from kelp) solution with a multi-tip dispenser into 0.05 M CaCl₂ solution in a loop fluidized bed reactor. The resultant semi-rigid spherical gels were then transferred to another reactor operated batch wise to absorb dissolved copper at low concentrations (10-40 ppm). When the concentration of the inert neutral salt NaNO₃, added to the reactor fluid was 0.01 M, the amount of copper absorbed was found to be substantially higher than that at 0.1 MNaN0₃. The conventional Langmuir's model based on the concentration of copper in solution yielded different values of conditional stability constant at different ionic strengths in the reactor fluid. However, by defining the copper-binding stability constant on the basis of copper activity in the gel phase with the competition from calcium for metal binding sites taken into account, a unique copper-binding stability constant and a unique calcium-binding stability constant were obtained. The numerical procedure for estimating the activity of copper in the gel fluid was modified from Jang et al. Water Research, 1990, in press).     

Usability principles and best practices for the user interface design of complex 3D architectural design and engineering tools

This study proposes usability principles for the user interfaces (UI) design of complex 3D parametric architectural design and engineering tools. Numerous usability principles have been developed for generic desktop or web applications. The authors tried to apply existing usability principles as guidelines for evaluating complex 3D design and engineering applications. However, the principles were too generic and high-level to be useful as design or evaluation guidelines. The authors, all with more than 10 or 30 years of experience with various CAD systems, selected and reviewed 10 state-of-the-art 3D parametric design and engineering applications and captured what they thought were best practices, as screenshots and videos. The collected best practices were reviewed through a series of discussion sessions. During the discussion sessions, UI design principles underlying the collected best practices were characterized in the line of existing UI principles. Based on the best practices and the derived common UI principles, a new set of refined and detailed UI principles were proposed for improving and evaluating 3D parametric engineering design tools in the future.     

Seasonal trend analysis of image time series

A procedure is introduced for the analysis of seasonal trends in time series of Earth observation imagery. Called Seasonal Trend Analysis (STA), the procedure is based on an initial stage of harmonic analysis of each year in the series to extract the annual and semi‐annual harmonics. Trends in the parameters of these harmonics over years are then analysed using a robust median‐slope procedure. Finally, images of these trends are used to create colour composites highlighting the amplitudes and phases of seasonality trends. The technique specifically rejects high‐frequency sub‐annual noise and is robust to short‐term interannual variability up to a period of 29% of the length of the series. It is, thus, a very effective procedure for focusing on the general nature of longer‐term trends in seasonality.     

New WS9326A Derivatives and One New Annimycin Derivative with Antimalarial Activity are Produced by Streptomyces asterosporus DSM 41452 and Its Mutant

In this study, we report that Streptomyces asterosporus DSM 41452 is a producer of new molecules related to the nonribosomal cyclodepsipeptide WS9326A and the polyketide annimycin. S. asterosporus DSM 41452 is shown to produce six cyclodepsipeptides and peptides, WS9326A to G. Notably, the compounds WS9326F and WS9326G have not been described before. The genome of S. asterosporus DSM 41452 was sequenced, and a putative WS9326A gene cluster was identified. Gene‐deletion experiments confirmed that this cluster was responsible for the biosynthesis of WS9326A to G. Additionally, a gene‐deletion experiment demonstrated that sas16 encoding a cytochrome P450 monooxygenase was involved in the synthesis of the novel (E)‐2,3‐dehydrotyrosine residue found in WS9326A and its derivatives. An insertion mutation within the putative annimycin gene cluster led to the production of a new annimycin derivative, annimycin B, which exhibited modest inhibitory activity against Plasmodium falciparum.     

Supercritical CO<Subscript>2</Subscript>-assisted,silicone-modified wood for enhanced fire resistance

A composite fabrication method is reported that incorporates silicones into bulk aspen substrates and subsequently crosslinks the additives in situ. This process utilizes supercritical CO₂, a non-toxic and easily recoverable solvent, as a transport and reaction medium resulting in aspen composites that have been uniformly infused with silicone. Flexure properties of aspen–silicone composites were determined to be indistinguishable from those of aspen. However, after thermal degradation, the residual flexure properties of the composite char were significantly improved compared to the virgin aspen char. Energy release rate, total energy released, and char yield of aspen and aspen–silicone composites were measured and a significant improvement in all three of these fire-resistance parameters was observed after the incorporation of silicone. Samples were also exposed to a controlled thermo-oxidative environment under an applied stress to measure lifetimes of each sample at given temperatures and stress levels. This data were subjected to an Arrhenius analysis and show a good linear correlation. Composite systems demonstrate significantly longer lifetimes than virgin aspen and the slopes of all lines are nearly identical, suggesting that no change in the chemical degradation mechanism has occurred.