Reliability and mechanical durability tests of flexible OLED with ALD coating

To improve the reliability and mechanical durability of a flexible organic light‐emitting diode display, the entire flexible display is coated with an aluminum oxide film by atomic layer deposition (ALD). Because the step coverage of ALD is excellent, the AlO_x film was deposited not only on the front and back surfaces but also on the side surfaces of the display. A high‐temperature and high‐humidity preservation test, repetitive bending tests, and a pencil hardness test were conducted on the flexible display with ALD‐AlO_x coating. The display survived 500 h of a 65°C, 95% preservation test, endured a 100,000‐time repetitive bending test with a curvature radius of 4 mm, and was found to have a pencil hardness of 4H.     

Design of a Four-Element, Hollow-Cube Corner Retroreflector for Satellites by use of a Genetic Algorithm

A four-element retroreflector was designed for satellite laser ranging and Earth-satellite-Earth laser long-path absorption measurement of the atmosphere. The retroreflector consists of four symmetrically located corner retroreflectors. Each retroreflector element has curved mirrors and tuned dihedral angles to correct velocity aberrations. A genetic algorithm was employed to optimize dihedral angles of each element and the directions of the four elements. The optimized four-element retroreflector has high reflectance with a reasonably broad angular coverage. It is also shown that the genetic algorithm is effective for optimizing optics with many parameters.     

Sensor Fusion System Using Recurrent Fuzzy Inference

In robotic and manufacturing systems, it is difficult to measure the state of systems accurately because of many uncertain factors and noise, and it is very important to estimate the state of systems. We must measure the phenomena of systems by multiple sensors and estimate the state of systems by acquiring information of sensors. However, we can not acquire all of sensor information synchronically, because each sensor has particular sensor information and measuring time. For estimating the state of systems by multiple sensors, a multi-sensor fusion system fusing various sensory information is needed. In this paper, we propose a Recurrent Fuzzy Inference (RFI) with recurrent inputs and apply it to a multi-sensor fusion system for estimating the state of systems. The membership functions of RFI are expressed by Radial Basis Function (RBF) with insensitive ranges. The shape of the membership functions can be adjusted by a learning algorithm. The learning algorithm is based on the steepest descent method and incremental learning which can add new fuzzy rules. The effectiveness of the multi-sensor fusion system using RFI will be shown through a numerical experiment of moving robot and estimation of surface roughness in grinding process.     

On the electrochemical activation of alkali-treated soft carbon for advanced electrochemical capacitors

The electrochemical activation process of the so-called “alkali-treated soft carbon” (ASC) has been examined in organic electrolyte solutions. SEM observation demonstrated that the edge plane of graphene structure of the ASC particle becomes rough after the activation, and XRD measurements indicated that the average lattice constant of graphene stacking in ASC increases after the activation process. Ex-situ ⁷Li NMR measurements proved that the insertion of cation (Li⁺) into the pore structure of ASC is associated with the activation process in the electrolyte dissolving Li salt. The pore-size distribution determined from N₂-gas adsorption for ASC electrodes before and after the electrochemical activation indicates that the pore structure becomes developed after the electrochemical polarization, especially in the pore-diameter range of 2–10 nm. A schematic model of the activation process has been presented, which includes electrochemical insertion of ions into the inside of the ASC.     

A short‐cut DNA extraction from cod caviar

Caviars represent the most consumed form of fish roe products. Due to high demand, ingredient roes of fish are often susceptible to illegal substitution with those of related fish. This study developed a simple and inexpensive protocol enabling the rapid extraction of DNA of acceptable quality and amount to PCR amplification from both cod caviars and their ingredient pollack roes. The protocol was based on extracting total genomic DNA from eggs using urea and a Chelex 100 chelating resin, and could be completed in less than 15 min. Approximately 8 µg of DNA were reproducibly obtained from single eggs of cod caviars and pollack roes in eight individual experiments, and the quality and amount of DNA were sufficient to serve as template for hundreds of PCR reactions of polymorphic DNA markers for phylogenetic analysis. Being applicable to various caviars, this protocol can be useful to detect illegal substitution among ingredient roes of related fishes in PCR‐based food inspection. Copyright © 2005 Society of Chemical Industry     

Neutron energy dependence of delayed neutron yields and its assessments

Incident neutron energy dependence of delayed neutron yields of uranium and plutonium isotopes is investigated. A summation calculation of decay and fission yield data is employed, and the energy dependence of the latter part is considered in a phenomenological way. Our calculation systematically reproduces the energy dependence of delayed neutron yields by introducing an energy dependence of the most probable charge and the odd–even e?ect. The calculated fission yields are assessed by comparison with JENDL/FPY-2011, delayed neutron activities, and decay heats. Although the fission yields in this work are optimized to delayed neutron yields, the calculated decay heats are in good agreement with the experimental data. Comparison of the fission yields calculated in this work and JENDL/FPY-2011 gave an important insight for the evaluation of the next Japanese evaluated nuclear data library (JENDL) .     

Bacteriophages isolated from activated sludge processes and their polyvalency

In this study, bacteriophages were isolated from activated sludge and their host range was studied. Bacterial isolates were obtained from an activated sludge process treating urban sewage, and bacteriophages were obtained by plaque assay using the bacterial isolates obtained in this study as the host. Out of 15 bacteria isolated, 9 supported plaque formation. The host range test was conducted with a combination of 8 bacteriophage isolates and 9 bacterial isolates. All of the 8 bacteriophages tested were found to form plaques on more than 1 host, and 4 of them formed plaques on both gram-positive and gram-negative bacterial isolates. Three of the 8 bacteriophages failed to form plaques on their original bacterial host. The experimental result indicates that bacteriophages are an active part of the activated sludge microbial ecosystem, having a very close ecological relationship with their host bacteria.     

X-ray absorption fine structure combined with fluorescence spectrometry for monitoring trace amounts of lead adsorption in the environmental conditions

The local structure of trace amounts of lead in an adsorbent matrix that contains a high concentration of iron and magnesium (Mg6Fe2(OH)16(CO3) x 3H2O) was successfully monitored by means of X-ray absorption fine structure spectroscopy combined with fluorescence spectrometry. A eutectic mixture of PbCO3 and Pb(OH)2 coagulated when Pb2+ was adsorbed from a 1.0 ppm aqueous solution, and in contrast, the major species was ion-exchanged Pb2+ in the case of adsorption from a 100 ppb aqueous solution. The difference was ascribed to the balance between the precipitation equilibrium for coagulation and the rate of the ion exchange reaction with surface hydroxyl groups.     

Diffuse biliary tract involvement mimicking primary sclerosing cholangitis in an experimental model of chronic graft-versus-host disease in mice

In a previous study, protein components purified from latex gloves that elicited allergenic reactions were characterized by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), and yielded apparent molecular weights of 14, 22, 30, 34, 46, and 58 kD. These allergenic components were isolated for further characterization by capillary zone electrophoresis and N-terminal amino acid sequence analysis. These components all migrated at approximately 25 and 35 min on capillary zone electrophoresis. Diode array spectral analysis detected indistinguishable characteristics between these two protein peaks. In addition, complex formation of these components with patients' immunoglobulin was demonstrated by capillary zone electrophoresis. Analysis of components separated by SDS-PAGE on a polyvinylidene difluoride membrane showed that the first 13 residues were identical to the sequence of hevein. Based on the criteria of charge-to-mass ratio and N-terminal amino acid sequence, our results suggest that these components of latex proteins are similar in the primary structure.