Compressive properties of pristine and SiC-Te-added MgB2 powders,green compacts and spark-plasma-sintered bulks

Pristine and (SiC+Te)-added MgB₂ powders, green and spark plasma sintered (SPS) compacts were investigated from the viewpoint of quasi-static and dynamic (Split-Hopkinson Pressure Bar, SHPB) compressive mechanical properties The amount of the additive (SiC+Te) was selected to be the optimum one for maximization of the superconducting functional parameters. Pristine and added MgB₂ show very similar compressive parameters (tan δ, fracture strength, Vickers hardness, others) and fragment size in the SHPB test. However, for the bulk SPSed samples the ratio of intergranular to transgranular fracturing changes, the first one being stronger in the added sample. This is reflected in the quasi-static K_IC that is higher for the added sample. Despite this result, sintered samples are brittle and have roughly similar fragmentation behavior as for brittle engineering ceramics. In the fragmentation process, the composite nature of our samples should be considered with a special focus on MgB₂ blocks (colonies) that show the major contribution to fracturing. The Glenn-Chudnovsky model of fracturing under dynamic load provides the closest values to our experimental fragment size data.     

Tensile fracture and failure behavior of technical flax fibers

The apparent tensile strength of technical flax fibers was determined in single‐fiber tests at various clamping lengths (20, 40, and 80 mm) and the outcome was compared with literature data. It was demonstrated that the strength of flax at each clamping length obeyed the two‐parameter Weibull model. The failure mode and sequence were studied in situ (i.e., during loading) by SEM and acoustic emission (AE). The failure sequence (axial splitting of the technical fiber along its elementary constituents, radial cracking of the elementary fibers, multiple fracture of the elementary fibers) concluded reflected the hierarchical build‐up of the flax bast fibers. To the above failure events AE amplitude ranges were assigned. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3638–3645, 2003     

Midbrain raphe cell firing and hippocampal theta rhythm in urethane-anaesthetized rats

This study aimed to examine the functional coupling between midbrain raphe and the septohippocampal system at the level of neuronal firing. Raphe unit activity and hippocampal EEG were simultaneously recorded in urethane-anaesthetized rats and their relationship was examined in the frequency domain. Subsets of presumably non-serotonergic neurones in both the dorsal and median raphe nuclei fired rhythmically in synchrony with hippocampal theta activity. Theta cells in the median raphe showed higher coherence than those in dorsal raphe and formed a more homogeneous group of cells, according to their firing rates. Since the raphe-septal serotonergic system is known to desynchronize the hippocampal EEG, activation of a subset of nonserotonergic cells during theta in this nucleus indicates a feedback from the limbic circuitry on the ascending raphe control of forebrain activity.     

Metallic Nanoparticles in Heterogeneous Catalysis

Catalysis Letters - Heterogeneous catalysis is a chemical process achieved at solid–gas or solid–liquid interfaces. Many factors including the particle size, shape and metal-support...     

The role of adsorbate overlayers in thiophene hydrodesulfurization over molybdenum and rhenium single crystals

Thiophene hydrodesulfurization (HDS) has been investigated over model single crystal catalysts of molybdenum and rhenium. Thiophene HDS is a structure sensitive reaction over rhenium and a structure insensitive reaction over molybdenum. Adsorbed sulfur decreases the activity of both Re(0001) and Mo(100) surfaces while adsorbed carbon has distinctly different effects on the catalytic properties of the two metals. Carbon overlayers deactivate the Re(0001) surface but have no effect on the HDS activity of the Mo(100) surface. Radiotracer³⁵S and¹⁴C studies indicate that HDS occurs on an adsorbate overlayer on molybdenum comprised primarily of carbon. HDS over rhenium, on the other hand, occurs on the bare metal surface. This appears to be responsible for the observed differences in the influence of surface structure on HDS activity.     

Melt‐compounded natural rubber nanocomposites with pristine and organophilic layered silicates of natural and synthetic origin

Composites based on natural rubber (NR) and containing organophilic and pristine layered silicates of natural and synthetic origin were produced by melt compounding and sulfur curing. The curing, thermomechanical, and mechanical properties of the mixes, which contained 10 phr (parts per hundred parts of rubber) silicates, were determined. The dispersion of the silicates was studied by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Organophilic clays accelerated the sulfur curing of NR, which was believed to occur because of a complexation reaction in which the amine groups of the clay intercalants participated. The property improvements caused by the fillers were ranked as follows: organophilic clays > pristine synthetic layered silicate (sodium fluorohectorite) > pristine natural clay (purified sodium bentonite) > precipitated nonlayered silica (used as a reference). This was attributed to partial intercalation of the organophilic clay by NR on the basis of XRD and TEM results and to the high aspect ratio of the fluorohectorite. Apart from intercalation, severe confinement (i.e., the collapse of the interlayer distance) of the organoclays was observed. This peculiar feature was traced to the formation of a zinc coordination complex, which extracted the amine intercalant of the organoclays, thus causing the collapse of the layers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 813–819, 2004     

Effects of hygrothermally decomposed polyurethane on the curing and mechanical properties of carbon black‐filled epoxidized natural rubber vulcanizates

Hygrothermally decomposed polyurethane (HD‐PUR) was mixed up to 20 phr in epoxidized natural rubber (with 50 mol % epoxidation; ENR50) recipes, and the curing and mechanical behaviors were studied. Mechanical testing of the ENR50/HD‐PUR vulcanizates determined the tensile, tear, compression‐set, hardness, abrasion, hysteresis, and resilience properties. No significant changes were observed in the tensile properties with the incorporation of HD‐PUR. The ENR50 compounds showed an increase in compression set with increasing HD‐PUR content. Rubbers cured by a semi‐efficient vulcanization system gave the best overall performance. A further improvement in curing and mechanical properties was achieved by the carbon black grade N330 being replaced with a more active grade (N375). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2265–2276, 2002     

Toughening of vinylester–urethane hybrid resins through functionalized polymers

Liquid nitrile rubber, hyperbranched polyester, and core/shell rubber particles of various functionality, namely, vinyl, carboxyl, and epoxy, were added up to 20 wt % to a bisphenol‐A‐based vinylester–urethane hybrid (VEUH) resin to improve its toughness. The toughness was characterized by the fracture toughness (K_c) and energy (G_c) determined on compact tensile (CT) specimens at ambient temperature. Toughness improvement in VEUH was mostly achieved when the modifiers reacted with the secondary hydroxyl groups of the bismethacryloxy vinyl ester resin and with the isocyanate of the polyisocyanate compound, instead of participating in the free‐radical crosslinking via styrene copolymerization. Thus, incorporation of carboxyl‐terminated liquid nitrile rubber (CTBN) yielded the highest toughness upgrade with at least a 20 wt % modifier content. It was, however, accompanied by a reduction in both the stiffness and glass transition temperature (T_g) of the VEUH resin. Albeit functionalized (epoxy and vinyl, respectively) hyperbranched polymers were less efficient toughness modifiers than was CTBN, they showed no adverse effect on the stiffness and T_g. Use of core/shell modifiers did not result in toughness improvement. The above changes in the toughness response were traced to the morphology assessed by dynamic mechanical thermal analysis (DMTA) and fractographic inspection of the fracture surface of broken CT specimens. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 672–680, 2002; DOI 10.1002/app.10392     

Toughness response of vinylester/epoxy‐based thermosets of interpenetrating network structure as a function of the epoxy resin formulation: Effects of the cyclohexylene linkage

Vinylester/epoxy (VE/EP)‐based thermosets of interpenetrating network (IPN) structures were produced by using a VE resin (bismethacryloxy derivative of a bisphenol A–type EP resin) with aliphatic (Al‐EP) and cycloaliphatic (Cal‐EP) EP resins. Curing of the EP resins occurred either with an aliphatic (Al‐Am) or cycloaliphatic diamine compound (Cal‐Am). Dynamic mechanical thermal analysis (DMTA) and atomic force microscopy (AFM) suggested the presence of an interpenetrating network (IPN) in the resulting thermosets. Fracture toughness (K_c) and fracture energy (G_c) were used as the toughness characterization parameters of the linear elastic fracture mechanics. Unexpectedly high K_c and G_c data were found for the systems containing cyclohexylene units in the EP network, such as VE/Al‐EP+Cal‐Am and VE/Cal‐EP+Al‐Am. This was attributed to the beneficial effects of the conformational changes of the cyclohexylene linkages (chair/boat), which were closely analogous to those in some thermoplastic copolyesters. The failure mode of the VE/EP thermoset combinations was studied in scanning electron microscopy (SEM) and discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2124–2131, 2003     

Relationship between Creativity, Imitation, and Cultural Diversity

There are both benefits and drawbacks to cultural diversity. It can lead to friction and exacerbate differences. However, as with biological diversity, cultural diversity is valuable in times of upheaval; if a previously effective solution no longer works, it is good to have alternatives available. What factors give rise to cultural diversity? This paper describes a preliminary investigation of this question using a computational model of cultural evolution. The model is composed of neural network based agents that evolve fitter ideas for actions by (1) inventing new ideas through modification of existing ones, and (2) imitating neighbors'' ideas. Numerical simulations indicate that the diversity of ideas in a population is positively correlated with both the proportion of creators to imitators in the population, and the rate at which creators create. This is the case for both minimum and peak diversity of actions over the duration of a run.