Analysis of electro‐optical properties of polymer‐stabilized OCB and the application to TFT‐LCDs

Abstract— A 9‐in. full‐color polymer‐stabilized OCB TFT‐LCD with stable bend alignment in the absence of an electric field was developed. The condition of the polymer stabilization, the characteristics of UV‐curable monomers, and their influence on the configurations of the polymer network in the cell were studied. Possible models of the configuration were proposed and their relationship to the electro‐optical properties was analyzed using a novel simulation method considering the distribution of anchoring effects from both alignment surfaces and the polymer network. It was suggested that a good performance such as high contrast ratio and fast response could be expected in the polymer network originating from newly developed monomers composed of multifunctional LC acrylates due to a relatively weak‐anchoring effect and presumably its localization near the alignment surfaces. By using the newly developed monomers under the optimized polymer‐stabilizing process, a high contrast ratio of 250:1 and fast response nearly equal to that of a conventional OCB cell were achieved.     

The Influence of Rapid Annealing Cycles on the Recrystallisation Behaviour of Cold Rolled Ultra Low Carbon and Low Carbon Steel

For ultra low carbon (ULC) and low carbon steel (LC), the influence of heating rate, annealing temperature, and holding time on the recrystallisation behaviour and the resulting grain size was investigated. For ULC smallest grain sizes of about 9 μm were obtained at the lowest heating rate whereas for LC significant smaller grain sizes of about 5 μm were determined at the highest heating rate. Furthermore, the evolution of the grain size distribution with varying heating rate, annealing temperature, and holding time was studied in dependence of the rolling and normal direction. The state of the as‐hot rolled microstructure as well as the precipitation state exert a strong influence on the development of the recrystallised microstructure along the different directions for both steel grades. The inherent prolonged microstructure due to the cold rolling process is still obvious just after recrystallisation. With ongoing annealing and grain growth, the aspect ratio approaches the equiaxed state. This change proceeds faster for the ULC steel grade. With increasing annealing temperature, the bimodal character of the grain size distribution disappears and the distribution becomes more homogeneous.     

Metastatic Voyage of Ovarian Cancer Cells in Ascites with the Assistance of Various Cellular Components

Epithelial ovarian cancer (EOC) is the most lethal gynecologic malignancy and has a unique metastatic route using ascites, known as the transcoelomic root. However, studies on ascites and contained cellular components have not yet been sufficiently clarified. In this review, we focus on the significance of accumulating ascites, contained EOC cells in the form of spheroids, and interaction with non-malignant host cells. To become resistant against anoikis, EOC cells form spheroids in ascites, where epithelial-to-mesenchymal transition stimulated by transforming growth factor-β can be a key pathway. As spheroids form, EOC cells are also gaining the ability to attach and invade the peritoneum to induce intraperitoneal metastasis, as well as resistance to conventional chemotherapy. Recently, accumulating evidence suggests that EOC spheroids in ascites are composed of not only cancer cells, but also non-malignant cells existing with higher abundance than EOC cells in ascites, including macrophages, mesothelial cells, and lymphocytes. Moreover, hetero-cellular spheroids are demonstrated to form more aggregated spheroids and have higher adhesion ability for the mesothelial layer. To improve the poor prognosis, we need to elucidate the mechanisms of spheroid formation and interactions with non-malignant cells in ascites that are a unique tumor microenvironment for EOC.     

Determination of nitroarenes in precipitation collected in Kanazawa, Japan

Eight nitroarenes, 1,3-, 1,6- and 1,8-dinitropyrenes, 1-, 2- and 4-nitropyrenes, 6-nitrochrysene and 2-nitrofluoranthene, in precipitation collected in Kanazawa were determined. The nitroarenes in the precipitation were concentrated onto solid phase extraction cartridges, and identified with high-performance liquid chromatography with chemiluminescence detection. The nitroarene concentrations in the precipitation were in the range 0.016-15 pmol/L, and the nitroarene composition tended to be the same as that in airborne particulates. 1-Nitropyrene in river water and seawater were also determined. 1-nitropyrene concentrations on the days after rain (19-110 fmol/L) were higher than those on the days before rain (4,11 fmol/L). Moreover, 1-nitropyrene concentrations in the river water were much lower than those in the precipitation, but were higher than those in the seawater. These results suggested that the nitroarenes in the precipitation and the river water came from airborne particulates.     

Lateral Inhomogeneity in the Electronic Structure of a Conjugated Poly(3‐hexylthiophene) Thin Film

How annealing influences the morphology of a highly regioregular poly(3‐hexylthiophene) (RR‐P3HT) film at the substrate interface as well as the lateral inhomogeneity in the electronic structure of the film are elucidated. Whereas previous studies have reported that high‐molecular‐weight (MW) RR‐P3HT films tend to show low crystallinity even after annealing, it is found that high‐MW RR‐P3HT does show high crystallinity after annealing at high temperature for a long time. Photoemission electron microscopy (PEEM), X‐ray photoemission spectroscopy, and ultraviolet photoemission spectroscopy results clearly resolve a considerable lateral inhomogeneity in the morphology of RR‐P3HT film, which results in a variation of the electronic structure depending on the local crystallinity. The PEEM results show how annealing facilitates crystal growth in a high‐MW RR‐P3HT film.     

Field evaluation of UHF radio propagation for an ITS safety system in an urban environment

Roadside-to-vehicle and vehicle-to-vehicle communication systems have been proposed as part of ITS development to help achieve vehicle safety and realize more secure road traffic environments. In this article we first introduce several typical applications and their radio range requirements for vehicle safety communication systems to clarify the technical point of view. Then we show some field experiment results in an urban area in Tokyo to investigate and verify the radio propagation characteristics and the quality of communications by using a wireless radio prototype system. Finally, we conclude that the current prototype system has potential to fulfill the radio range requirements of vehicle safety communications, but there are still lots of issues that need to be addressed.     

Development of thermoelectric module based on dense Ca3Co4O9 and Zn0.98Al0.02O legs

Ca₃Co₄O₉ (p-type) and Zn_0.98Al_0.02O (n-type) pellets were prepared by conventional sintering (CS) and Spark Plasma sintering (SPS) starting from the oxides. The best p-type sample was SPS Ca₃Co₄O₉ obtained from pre-sintered pellets, with electrical conductivity σ = 144 S/cm and Seebeck coefficient S = 172 μV/K at 800 °C, while thermal conductivity κ = 2.00 W/m×K and figure of merit ZT = 0.23. The best n-type sample was CS Zn_0.98Al_0.02O showing σ = 83 S/cm and S = ?268 μV/K at 800 °C, while = 5.03 W/m×K and ZT = 0.127. The output power of a module based on SPS Ca₃Co₄O₉ and CS Zn_0.98Al_0.02O legs was 2.26 mW (with T = 500 °C, ΔT = 248 °C).     

Catalytic graphitization of an amorphous carbon film under focused electron beam irradiation due to the presence of sputtered nickel metal particles

Electron beam irradiation of Ni particles (diameter: ∼500 nm) in a transmission electron microscope (TEM) formed small secondary particles, which moved randomly on an amorphous carbon film. Catalytic graphitization occurred along the path traced by the moving particles. It is generally well known that heat treatment is needed to produce catalytic graphitization of an amorphous carbon. However, we rapidly produced catalytic graphitization in the presence of sputtered Ni particles by focused electron beam irradiation in the TEM although no external heating was employed.     

Nitroarene concentrations and direct-acting mutagenicity of diesel exhaust particulates fractionated by silica-gel column chromatography

Diesel exhaust particulates were extracted with benzene-ethanol (3:1, v/v) and separated into five fractions by silica-gel column chromatography. Direct-acting mutagenic activity was assayed by the Ames test using the Salmonella typhimurium YG1024 strain. The total activity of five fractions was about four times greater than that of the crude extract, suggesting that the activities in the fractions were suppressed in the crude extract. Strong activity was observed in fraction 4 which was eluted with dichloromethane (61.5% of the total activity) and fraction 5 which was eluted with ethanol (35.3%). Nitropolycyclic aromatic hydrocarbons (NPAHs) were determined by high-performance liquid chromatography with chemiluminescence detection. They were found mainly in fraction 4, although one NPAH was in fraction 3 which was eluted with n-hexane-dichloromethane (3:1, v/v). Based on these results, 53.1% of the activity in fraction 4 was attributed to NPAHs. The contribution of 1-nitropyrene and 1,3-, 1,6- and 1,8-dinitropyrenes was great and that of the other NPAHs was small. The mutagenic compound in fraction 5 was not identified. Fractions 1 and 2, which were eluted with n-hexane, and fraction 3 suppressed the activity of fraction 4. Polycyclic aromatic hydrocarbons in fractions 2 and 3 were considered as possible suppressors of NPAHs.