Present Status of the Nd:YAG Thomson Scattering System Development for Time Evolution Measurement of Plasma Profile on Heliotron J

A new high repetition rate Nd:YAG Thomson scattering system is developed for the Heliotron J helical device.A main purpose of installing the new system is the temporal evolution measurement of a plasma profile for improved confinement physics such as the edge transport barrier (H-mode) or the internal transport barrier of the helical plasma.The system has 25 spatial points with ～10mm resolution.Two high repetition Nd:YAG lasers (>550mJ@ 50Hz) realize the measurement of the time evolution of the plasma profile with ～10ms time intervals.Scattered light is collected by a large concave mirror (D=800 mm,f/2.25) with a solid angle of ～100 mstr and transferred to interference filter polychromators by optical fiber bundles in a staircase form.The signal is amplified by newly designed fast preamplifiers with DC and AC output,which reduces the low frequency background noise.The signals are digitized with a multi-event QDC,fast gated integrators.The data acquisition is performed by a VME-based system operated by the CINOS.     

基于目标模型的遗传算法在走廊辨识中的应用

为了保证移动机器人能够沿着走廊自动行走并具有一定的智能水平，工作环境的辨识就显得至关重要．同时考虑到控制的实时性，提出了一种基于目标模型的模型匹配的走廊辨识方法．利用遗传算法对未处理的灰度图像中的走廊影像进行匹配，从而使移动机器人自动地适应复杂环境，实现了模型对灯光条件变化以及包括干扰物等环境噪声的鲁棒性，并经实际走廊图像试验验证了辨识效果．     

A LRT Control Method Using Sensor Information in Distribution Systems with a Large Amount of PVs and EVs

It is of prime importance to maintain voltage profile within the proper range in distribution systems with a large amount of photovoltaics and electric vehicles (EVs). In particular, there is a possibility that line drop compensation (LDC) logic, which is utilized for the control of load ratio tap transformer (LRT) does not work properly when reverse power flow is included partially. Hence, in this paper, we have developed a new LRT control method based on the sensor information supposing that some section switchgears with sensors are introduced in the future distribution systems. Specifically, the extreme value of voltage profile is estimated by convergence calculation in the section between the section switchgear with sensor and LRT. Moreover, the voltage at the end node can be estimated by LDC method using sensor information of section switchgear. The proposed method was tested using a distribution system model and its effectiveness was shown.     

Simultaneous Oxidization of NOx and SO2 by a New Non-thermal Plasma Reactor Enhanced by Catalyst and Additive

The non-thermal plasma as one of the most promising technologies for removing NOx and SO2 has attrm~ted much attention. In this study, a new plasma reactor combined with catalyst and additive was developed to effectively oxidize and remove NOx and SO2 in the flue gas. The experimental results showed that TiO2 could improve the oxidation efficiency of SO2 in the case of applying plasma while having a negative effect on the oxidation process of NO and NOx. With the addition of NH3, the oxidation rates of NOx, NO and SO2 were slightly increased. However, the effect of adding NH3 on NOx oxidation was negative when the temperature was above 200℃.     

Electrical Properties of Superionic Conducting Glasses in the Pseudobinary System CuI-Cu2MoO4

Cu⁺-ion-conducting glasses were prepared in the pseudo-binary system CuI-Cu₂MoO₄. These glasses have high ionic conductivities at room temperature in the range 10⁻¹ to 10° S·m⁻¹, which are 10 to 20 times greater than those of the Ag⁺-ion-conducting glasses with the same iodide contents in the system AgI-Ag₂MoO₄. The conductivities increase with increasing CuI content. The increase in the conductivity can be explained in terms of a decrease in the activation energy for conduction. The electronic conductivity was measured by the Wagner polarization method and indicates that the transport number of Cu⁺ ions in those glasses is 0.9996 and larger.     

Microstructure of α-AgI-frozen composites in the AgI- Ag2O-B2O3 system after heat treatment

Abstracts are not published in this journal This revised version was published online in November 2006 with corrections to the Cover Date.     

局部硬化区周围的应力应变特性对HAZ断裂行为的影响

从力学的观点出发，将高强钢焊接热影响区粗晶区中硬化组织ＭＡ组元视作局部硬化区（ＬＨＺ）。采用二维有限元数值方法分析了ＬＨＺ周围的应力应变分布。结果表明：ＬＨＺ存在时，ＬＨＺ内部应力升高，ＬＨＺ与基体产生变形差。这意味着ＬＨＺ内部或ＬＨＺ与基体界面容易引发裂纹。最后通过对ＴＭＣＰ钢焊接热影响区微观裂纹的实验观察，验证了本文提出的断裂模型。     

Odor Components of Human Breath After the Ingestion of Grated Raw Garlic

The major odor components of finely grated, raw garlic in the air of the human mouth have been studied. Immediately after garlic ingestion, tests of the mouth air of six subjects revealed two major peaks that were positively identified as being allyl mercaptan and diallyl disulfide; these findings are based on an evaluation of the fragment patterns of a GC-MS analysis and from the actual retention times of these authentic compounds. The allyl mercaptan level was higher than the level of diallyl disulfide, although both compounds smell like garlic. Our results suggest that after garlic ingestion, allyl mercaptan is the major garlic-smelling compound in human mouth air, and diallyl disulfide is secondary.     

Study on a Voltage Estimation of Tap‐Changing Transformer in Consideration of SVC Introduction

Recent years, installation of photovoltaic (PV) system is active by the environmental problem and feed in tariff system. Due to PV's output fluctuation, the static var compensator (SVC) made by power electronics technology is planning to install in distribution system. The SVC is expected for maintain the voltage. But SVC differs in a theory of operation of the existing voltage controller load ratio control transformer (LRT) and step voltage regulator (SVR). Because the SVC operation makes the system impedance changes, the existing voltage controller may not operate effectively. In this study, the intelligent‐control method which used the radial basis function (RBF) network is proposed. This method can reduce the effects of the SVC operation by including the performance characteristics of SVC in the conventional method. An advantage of unnecessary arrangement attention of the SVC setup node and easy cooperation with the existing equipment is obtained by applying this method.     

Preparation and Properties of Quenched Li2O-BaO-Nb2O5 Glasses

Glasses were prepared in the wide variety of compositions in the system Li₂O-BaO-Nb₂O₅, which contains no "glass-former," by the twin-roller quenching technique. The crystallization temperature ranges from 500° to 700°C and increases as Li₂O is replaced by BaO. The dielectric constant increases steeply with temperature, reaching an anomalously large value (10⁴) in glasses which contain a large amount of Li₂O. Such a temperature dependence of dielectric constant is very similar to that of conductivity in each glass, indicating that the dielectric behavior is caused by polarization due to the ionic motion in glass. The conductivity at 500 K ranges from 10⁻¹³ to 10⁻⁵Ω⁻¹·cm⁻¹ and the activation energy for conduction from 120 to 40 kJ/mol. The concentration of Li⁺ ions mainly controls the conductivity and the addition of Ba²⁺ ions slightly lowers it.