Performance evaluation and effect of biogas circulation rate of a bubble column for biological desulfurization

Biological desulfurization using a bubble column reactor was investigated in a continuous biogas treatment. Rapid biogas circulation between the digester and the bubble column for biological desulfurization was used to stimulate the gas-liquid mass transfer of H(2)S. A positive correlation between the biogas circulation rate and H(2)S removal rate was observed. Moreover, the increase in the circulation rate stimulated the O(2) mass transfer, eventually translating into an increase in sulfate production from the oxidation of H(2)S. Throughout the continuous experiment, the reactor retained sufficient levels of sulfide-oxidizing bacteria. A comparison of the results of the continuous biogas treatment and batch tests suggests that the gas-liquid mass transfer rate of H(2)S was the rate-limiting step in the biological desulfurization in the reactor, indicating that the mass transfer efficiency of H(2)S needs to be improved to enhance the desulfurization performance.     

A FAST METHOD OF RADIATIVE HEAT TRANSFER ANALYSIS BETWEEN ARBITRARY THREE-DIMENSIONAL BODIES COMPOSED OF SPECULAR AND DIFFUSE SURFACES

The radiation element method by ray emission model (REM²) has been improved by using the law of reciprocity for the specular view factor and the incomplete Cholesky conjugate gradient (ICCG) method to reduce computational time. This improved method was applied to analyze the radiative heat transfer between arbitrary three-dimensional bodies composed of specular and diffuse surfaces. The accuracy of the improved method was evaluated by comparing analytical solutions. And the method was used to calculate radiative heat transfer between machine elements and heater panels. CPU time to calculate the radiative exchange for a model composed of 3193 elements was reduced to 1/430 of that by the previous numerical method using a decomposition method.     

Glucosamine Extends the Lifespan of Caenorhabditis elegans via Autophagy Induction

Glucosamine (GlcN) is commonly used as a dietary supplement to promote cartilage health in humans. We previously reported that GlcN could induce autophagy in cultured mammalian cells. Autophagy is known to be involved in the prevention of various diseases and aging. Here, we showed that GlcN extended the lifespan of the nematode Caenorhabditis elegans by inducing autophagy. Autophagy induction by GlcN was demonstrated by western blotting for LGG-1 (an ortholog of mammalian LC3) and by detecting autophagosomal dots in seam cells by fluorescence microscopy. Lifespan assays revealed that GlcN-induced lifespan extension was achieved with at least 5 mM GlcN. A maximum lifespan extension of approximately 30 % was achieved with 20 mM GlcN (p<0.0001). GlcN-induced lifespan extension was not dependent on the longevity genes daf-16 and sir-2.1 but dependent on the autophagy-essential gene atg-18. Therefore, we suggest that oral administration of GlcN could help delay the aging process via autophagy induction.     

Generation of single-walled carbon nanotubes from alcohol and generation mechanism by molecular dynamics simulations

Recent advances in high-purity and high-yield catalytic chemical vapor deposition (CVD) generation of single-walled carbon nanotubes (SWNTs) from alcohol are comprehensively presented and discussed on the basis of results obtained from both experimental and numerical investigations. We have uniquely adopted alcohol as a carbon feedstock, and this has resulted in high-quality, low-temperature synthesis of SWNTs. This technique can produce SWNTs even at a very low temperature of 550 degrees C, which is about 300 degrees C lower than the conventional CVD methods in which methane or acetylene is typically used. We demonstrate the excellence of the proposed alcohol catalytic CVD method for high-yield production of SWNTs when Fe-Co on USY-zeolite powder was used as a catalyst. At optimum CVD conditions, a SWNT yield of more than 40 wt % was achieved over the weight of the catalytic powder within the reaction time of 120 min. In addition to the advantages for mass production, this method is also suitable for the direct synthesis of high-quality SWNTs on Si and quartz substrates when combined with the newly developed liquid-based "dip-coat" technique to mount catalytic metals on the surface of substrates. This method allows easy and costless loading of catalytic metals without the need for any support or underlayer materials that were usually required in previous studies for the generation of a sufficient quantity of SWNTs on an Si surface. Finally, the result of molecular dynamics simulation for the SWNT growth process is presented to obtain a fundamental insight into the initial growth mechanism on the catalytic particles.     

Selective O–H Bond Cleavage in the Radiolysis of Quartz

Cleavage of the O–H bond in quartz was studied by Fourier transform infrared spectroscopy and ESR spectroscopy. When quartz single crystals and fused silica glass are γ-irradiated at 77 K, hydrogen atoms are produced by rupture of O–H bonds. The initial efficiency of O–H bond cleavage in quartz single crystals, i.e. the initial yield of H atoms, was three times as great as that in fused silica glass, although the concentration of O–H bonds in quartz single crystals (70 ppm) is much lower than that in fused silica glass (4000 ppm). The efficiency of O–H bond cleavage in quartz single crystals indicates that energy transfer from the irradiated single crystal to the O–H bonds takes place effectively at 77 K. The efficiency of O–H bond cleavage decreases with increasing γ-ray dose, i.e. with increasing amounts of radiation-induced defects in quartz single crystals. When the radiation-induced defects are removed by annealing the irradiated quartz single crystal at 773 K, the O–H bonds are ruptured again as effectively as for a fresh quartz single crystal. The distance of the energy transfer, estimated by a target model, is ∼15 nm.     

Structurally Diverse Polyamines: Solid‐Phase Synthesis and Interaction with DNA

A versatile solid‐phase approach based on peptide chemistry was used to construct four classes of structurally diverse polyamines with modified backbones: linear, partially constrained, branched, and cyclic. Their effects on DNA duplex stability and structure were examined. The polyamines showed distinct activities, thus highlighting the importance of polyamine backbone structure. Interestingly, the rank order of polyamine ability for DNA compaction was different to that for their effects on circular dichroism and melting temperature, thus indicating that these polyamines have distinct effects on secondary and higher‐order structures of DNA.     

Iodine-initiated,solid-state copolymerization of tetraoxane with 1,3-dioxolane in the presence of methylal. II. Properties of copolymer obtained by beaker-scale copolymerization

In order to elucidate the copolymerization mechanism, the properties of the copolymer obtained by the iodine-initiated copolymerization of the tetraoxane–1,3-dioxolane–methylal system have been studied using gas chromatography, microscopy, scanning electron microscopy, differential scanning calorimetry, and gel permeation chromatography. From the behavior of the thermal stability and gas chromatography of the reaction mixture, it was found that reactivity of 1,3-dioxolane with active center is larger than that of tetraoxane, i.e., more than 90% 1,3-dioxolane is consumed at an early stage of the polymerization. The results obtained by microscopy, DSC, and GPC of the copolymer suggested that the copolymerization proceeds from the surface to the center of the tetraoxane crystal as if it were a core model. It was also suggested that the heterogeniety in copolymer properties can be explained not only by heterogeneous dispersion of 1,3-dioxolane in tetraoxane crystal, but also by the difference of reactivity of 1,3-dioxolane with the active center.     

Fault diagnosis of a power system based on a description of the structure and function of the relay system

Abstract: This paper proposes a method of fault diagnosis of power systems based on a knowledge-based approach. It makes use of information on relays and circuit breakers. The feature of this method is that the relay sequence is represented by a logical circuit. In this circuit the following two relations are represented; a logical relation between inputs and output of a gate and a connective relation between logical gates. These two relations are expressed by production rules in the knowledge base. When the information from relays and circuit breakers is given to the logical circuit, faulty components are pointed out.