Mobile positioning using wireless networks: possibilities and fundamental limitations based on available wireless network measurements

Positioning in wireless networks is mainly used for safety, gaming, and commercial services. It is expected to increase in popularity when emergency call services become mandatory as well as with the advent of more advanced location-based services and mobile gaming. In this article, we discuss and illustrate the possibilities and fundamental limitations associated with mobile positioning based on available wireless network measurements. The possibilities include a sensor fusion approach and model-based filtering, while the fundamental limitations provide hard bounds on the accuracy of position estimates, given the information in the measurements in the most favorable situation. The focus of this article is to illustrate the relation between performance requirements, such as those stated by the Federal Communications Commission (FCC), and the available measurements. Specific issues on accuracy limitation in each measurement, such as synchronization and multipath problems, are briefly commented upon. A geometrical example, as well as a realistic example adopted from a cell planning tool, are used for illustration.     

Suppression of MHC class II expression by human class II trans-activator constructs lacking the N-terminal domain

The class II trans-activator (CIITA) is a bi- or multi-functional domain protein which plays a critical role in the expression of MHC class II genes. We report that removal of the N-terminal 151 amino acids, encompassing all of the acidic domain but leaving intact the proline/serine/threonine-rich domain, results in a mutant protein with potent suppressive properties for MHC class II expression. HeLa cells stably or transiently transfected with mutant CIITA constructs showed up to 99% suppression of MHC class II antigen induction by IFN-gamma and marked suppression of HLA-DRA mRNA expression. Transient transfection of a B lymphoma line resulted in up to 89% reduction of constitutive MHC class II expression within 5 days and suppression of HLA-DRA mRNA synthesis.     

Biapenem versus imipenem/cilastatin in the treatment of complicated intra-abdominal infections: report from a Swedish Study Group

The objective of this study is to describe usual medical management and costs associated with recurrent respiratory infections in subjects with chronic obstructive bronchitis in France. A prospective survey was performed in Autumn 1994 on a national sample of private practice pulmonologists (N = 71). Two hundred forty-four patients, presenting at least one infection of the lower respiratory tract, were included. Bronchitis was the most frequent acute exacerbation observed (94%). Pneumonia concerned 9% of the patients. Biological tests, X-rays and pulmonary function tests were prescribed for, respectively, 59, 65 and 45% of the patients. Following the visit, 15 patients were hospitalized (6%). The direct medical cost per acute exacerbation was estimated 3,289 francs (1994 value) of which 60% were hospital-related. An average 10.4 day sick-leave was prescribed to 21% of patients in employment. For those patients, this sick-leave was associated to an extra-cost of 1,264-1,876 francs for Social Security and of 0-2,553 francs out of pocket per episode varying according to their Benefit Regimen.     

Eight-year exploration of shrinkage in high-performance concrete

In this paper, an experimental and analytical exploration on the effect of water-binder ratio (w/b), silica fume and age on autogenous, carbonation, drying and total shrinkage of high-performance concrete (HPC) is outlined. Eight types of HPC were studied. Carbonation, internal relative humidity (RH) and strength were studied on specimens from the same batch of HPC that was used in the studies of shrinkage. The results indicate fairly good correlation between carbonation, shrinkage, w/b and RH. The type and amount of silica fume affected shrinkage.     

Roll force,torque, lever arm coefficient,and strain distribution in edge rolling

Due to the growing importance of width control in strip and plate mills, edge rolling is currently an im-portant process in hot rolling mills. Research in edge rolling has been carried out, and in the present ar-ticle, models for roll force, torque, and lever arm coefficient are derived using the upper bound method. A simple, kinematically admissible deformation zone and velocity field, independent of friction in the roll gap, is proposed, and the energy dissipation rate is derived. The formula for energy dissipation rate has, in practice, no limitation because all edge rolling geometries are safely in the area where the formula is valid. Roll force and torque are derived by means of two independent integrals. Thus, the lever arm coef-ficient is evaluated from the expressions for roll force and torque using conventional rolling theory. Roll-ing trials report good agreement with theory. Measured roll forces are similar to calculated forces. Furthermore, the shape of the dogbone that arises during edge rolling is in fairly good agreement with the calculated dogbone shape. Deviations are due to the deviation from ideally plastic material in the ex-periments. Also, the strain distribution over the dogbone is similar to the proposed deformation zone. Thus, a new formula has been developed to a stage that it can be implemented in width control systems for edge rolling stands in hot strip and plate mills.     

DECOUPLER DESIGN AND CONTROL SYSTEM TUNING BY INA FOR DISTILLATION COMPOSITION CONTROL†

Six distillation column models have been used in studies of the usefulness of the Inverse Nyquist Array (INA) method for design of dual composition control for distillation. Five of the column models are experimental, one describing an industrial column, the others four pilot plants. One column model is obtained by modeling from first principles.

The control strategies investigated and compared are multiloop SISO, 2-way decoupling and l-way decoupling. The control variables are the standard ones, i.e. reflux flow and boilup.

In most of the cases INA has been found to be a useful tool for design of the loops and for comparison of the different control approaches. INA has also been found to be useful for simultaneous tuning of the decouplers and the feedback controllers.

For 2-way decoupling the criterion to minimize interaction at the critical frequency for each primary feedback loop has been found useful in most, but not all, cases. The scheme can be designed by pure gains in the decouplers and there is no reason to introduce dynamics into the decouplers—the systems studied are already sufficiently rich in dynamics.

INA has been found to be a suitable vehicle for the choice between the two possible l-way decoupling schemes.

With the design approach taken, l-way decoupling has been found to provide considerably better control quality than 2-way decoupling in two of the six systems, the differences in control quality being small in the other cases.

The effect of model mismatching on the results, caused e.g. by process nonlinearities, is discussed and simple rules to decrease the parameter sensitivity for 2-way decoupling schemes are given. When model mismatching is considered, the advantage of l-way decoupling over 2-way decoupling seems to increase.

One deficiency of the INA design as used in this paper is that it does not single out the design which is to be preferred on the grounds of robustness.     

Relationship between the attenuation of downwelling irradiance at 490 nm with the attenuation of PAR (400 nm-700 nm) in the Baltic Sea

The vertical attenuation coefficient of diffuse downwelling irradiance at 490 nm (K_d 490) is a parameter that we routinely derive from SeaWiFS images of the Baltic Sea. Here, through model simulations, we examine the relationship between K_d(490), and the vertical attenuation coefficient of PAR (K_d PAR), as this later coefficient determines the light available for aquatic photosynthesis. A simple semi-analytical model is used to predict K_d(490) and K_d(PAR), as a function of the concentrations of chlorophyll, colored dissolved organic material (CDOM), suspended inorganic, and suspended organic particulate material. A series of model simulations based on variations in these optically significant constituents over a range realistic for the Baltic Sea, are used to define the relationship between the two attenuation coefficients.

Kd(PAR)=0.6677Kd^0.6763(490).