Technological and sensorial properties of liquid nitrogen ice cream enriched with protein from brewing waste (trub)

Debittered trub (brewing waste) is an important source of protein source (70.26%). Trub and whey protein were used for 5% protein enrichment of ice cream frozen by liquid nitrogen. Three formulations were elaborated: ice cream standard (ICS), ice cream with whey protein (ICW) and ice cream with trub (ICT). Chemical composition, rheological properties, texture, overrun, melting rate, scanning electron microscopy and a sensorial test were performed. Results showed that ICT presented a higher viscosity, obtained on the upward curve up to 6.76 Pa s⁻¹, consistency index (22.96 (Pa s⁻¹)ⁿ), hysteresis area (140.40 mPa s⁻¹) and hardness (31113.33 g) but a lower melting rate (0.38 g min⁻¹), overrun (13.92%) and sensorial acceptability than the other formulations. The addition of trub debittered for protein enrichment improved ice cream properties and demonstrated that it could be used as a food ingredient.     

A Current-Mode, Dual Slope, Integrated Capacitance-to-Pulse Duration Converter

A capacitance-to-pulse duration converter, specifically designed for interfacing capacitive sensors, is presented. The operating principle is a double slope approach implemented using transconductor-based Miller integrators. The main strengths of the proposed circuit are: 1) intrinsically small sensitivity to temperature; 2) simplicity of trimming offset and gain to correct the sensor parameter spread; and 3) fast wake-up time. The circuit nonidealities are analyzed in order to identify the elements responsible for the residual temperature sensitivity and jitter on the pulse duration. The effectiveness of the method is demonstrated by measurements performed on a prototype, designed and fabricated using the 0.35 mum, 3.3 V Bipolar-CMOS-DMOS process BCD6 of STMicroelectronics.     

In vivo characterization of renal auto-antigens involved in human auto-immune diseases: the case of membranous glomerulonephritis

Renal auto-immune diseases represent a major source of morbidity in humans. For many years the knowledge on mechanisms of auto-immunity involving the kidney has been uniquely based on animal models. However, these findings often could not be readily translated to humans owing to notably difference in antigen expression by human podocytes. One example is Heymann nephritis (HN), the experimental model of human membranous glomerulonephritis (MGN), which is obtained in rats by injecting antibodies against megalin, a protein that is not present in human glomeruli. Human studies could not be done in the past since sequencing required too much material exceeding what obtainable from tissue biopsies in vivo. Research is now on the way to identify auto-antigens and isolate specific auto-antibodies in humans. New technology developments based on tissue microdissection and proteomical analysis have facilitated the recent discoveries, allowing direct analysis of human tissue in vivo. Major advances on the pathogenesis of MGN, the prototype for the formation and glomerular deposition of auto-antibodies, are now in progress. Two independent groups have, in fact, demonstrated the existence of specific IgG(4) against phospholipase A2 receptor, aldose reductase and Mn-superoxide dismutase in glomerular eluates and in plasma of a prominent part of patients with MGN, suggesting a major role of these proteins as auto-antigens in human MGN. This review will focalize these aspects outlining the contribution of proteomics in most recent developments.     

The behavior of the4He viscosity near the superfluid transition

Measurements of the shear viscosity at saturated vapor pressure through the lambda transition indicate a singular behavior of the form |1 – (/)|=A ^x , (where =|1–(T/T )|, with equal values for the critical exponent on both sides of the transition.Work sponsored by Consiglio Nazionale delle Ricerche, Rome (Italy).     

Use of cryogenic machining to improve the adhesion of sphene bioceramic coatings on titanium substrates for dental and orthopaedic applications

Rods of commercially pure titanium were machined using standard oil-based emulsion and cryogenic cooling, and were then coated with sphene (CaTiSiO₅) bioceramic by spray coating using an automatic airbrush. The sphene bioceramic was synthesized in-situ starting from a suspension of polysiloxane that used as SiO₂ precursor, CaCO₃ and TiO₂ nanoparticles. The suspension was deposited on the machined substrates, which were heat treated up to 950?°C in order to promote the formation of sphene ceramic. The produced coated prototypes were characterized to evaluate the effect of the machining conditions on surface roughness and microstructure of the substrate, and thereby their effect on coating adhesion. Nanoindentation tests were employed to determine the hardness and elastic modulus of the coating through its thickness. Results showed that the reduced amount of defects on the surface of the cryo-machined substrates, contributed to increase the hardness, elastic modulus and adhesion strength of the coating-substrate interfaces compared to standard machined samples, therefore improving adhesion of the coating to the underlying substrate.     

An automatic procedure for the synthesis and optimization of very low-frequency Gm–C integrators

Fully integrated low frequency filters are critical cells that should be carefully designed in order to avoid excessive area occupation. In this work we propose an automatic procedure capable of optimizing the design of G_m?CC integrators, which constitute the basis of a wide class of G_m?CC filters. The optimization target is minimizing the cell area with constraints on input range and low frequency noise. Lower and upper bounds can be fixed to most quantities and design parameters in order to avoid solutions that are not compatible with the physical limitations of the process. The program has been developed within the MATLAB^? platform, exploiting the optimization toolbox. The effect of several important design parameters on the optimization of low frequency integrators has been investigated using the proposed routine. The strong interaction between noise and low frequency constraints has been demonstrated, showing the impressive impact of strict noise specifications on the occupied area. The actual effectiveness of parameters such as the current division factor or approaches such as flicker noise rejection by means of chopper modulation has been investigated. Examples of integrator synthesis, performed using the proposed procedure configured with the parameters of a commercial CMOS process, are presented. The consistence between the characteristics of the cells and the initial specifications has been checked using electrical simulations showing a maximum discrepancy with the initial specifications of nearly 80%. A semi-manual method to refine the synthesized cells and improve the accuracy is proposed.     

A voltage controlled CMOS current divider with linear characteristic

A compact voltage controlled CMOS current divider is presented. Differently from previous implementations, exploiting the MOSFET translinear characteristics in subthreshold region, the proposed circuit is based on devices operating from moderate to strong inversion. An input current linearity range of nearly a decade is obtained by compensating for the deviations from the ideal drain current square-law approximation through an original empirical approach. The circuit is suitable for use as a building block in analog multipliers and for transconductor continuous tuning. The effectiveness of the proposed configuration is demonstrated by means of electrical simulations, performed on a prototype designed with a commercial process. The robustness of the linearization algorithm with respect to temperature variations is proven.     

Ductile fracture prediction in cold forging process chains

The paper presents a new approach for the prediction of ductile fracture occurrence in multi-stage cold forging process chains. The approach combines the fracture criterion proposed by Xue and Wierzbicky with a linear damage accumulation law. Thanks to this feature, the approach is capable of predicting both the location where the failure events occur under the action of external loading and the time they take to be generated. An application to the multi-stage cold forging of a C35 Torx-type socket screw carried out on a double-blow header is presented and results of predictions are compared with experimental observations.     

A closed-loop mass flow controller based on static solid-state devices

A mass flow controller, based on an integrated flow sensor and a thermally actuated solid state regulator, is presented. The sensor is a miniaturized differential calorimeter obtained by postprocessing a silicon chip fabricated by a standard microelectronic process. The regulator consists in a microchannel etched into the surface of a silicon substrate and sealed with a glass plate, joined to the silicon die using anodic bonding. Flow regulation is achieved by varying the channel temperature by means of a chromium resistor. The two devices are connected in closed-loop through a low noise-low offset electronic circuit. Experimental data, demonstrating the effectiveness of the flow controller, are presented. Limitations of the proposed approach and possible improvements are discussed.     

Disruption of seven hypothetical aryl alcohol dehydrogenase genes from Saccharomyces cerevisiae and construction of a multiple knock-out strain

By in silicio analysis, we have discovered that there are seven open reading frames (ORFs) in Saccharomyces cerevisiae whose protein products show a high degree of amino acid sequence similarity to the aryl alcohol dehydrogenase (AAD) of the lignin-degrading fungus Phanerochaete chrysosporium. Yeast cultures grown to stationary phase display a significant aryl alcohol dehydrogenase activity by degrading aromatic aldehydes to the corresponding alcohols. To study the biochemical and the biological role of each of the AAD genes, a series of mutant strains carrying deletion of one or more of the AAD-coding sequences was constructed by PCR-mediated gene replacement, using the readily selectable marker kanMX. The correct targeting of the PCR-generated disruption cassette into the genomic locus was verified by analytical PCR and by pulse-field gel electrophoresis (PFGE) followed by Southern blot analysis. Double, triple and quadruple mutant strains were obtained by classical genetic methods, while the construction of the quintuple, sextuple and septuple mutants was achieved by using the marker URA3 from Kluyveromyces lactis, HIS3 from Schizosaccharomyces pombe and TRP1 from S. cerevisiae. None of the knock-out strains revealed any mutant phenotype when tested for the degradation of aromatic aldehydes using both spectrophotometry and high performance liquid chromatography (HPLC). Specific tests for changes in the ergosterol and phospholipids profiles did not reveal any mutant phenotype and mating and sporulation efficiencies were not affected in the septuple deletant. Compared to the wild-type strain, the septuple deletant showed an increased resistance to the anisaldehyde, but there is a possibility that the nutritional markers used for gene replacement are causing this effect.