Mathematical modelling of sound transmission loss performances of different coloured surfaces coated with polyurethane-based paint

ABSTRACT

The aim of this study is to investigate the effect of morphologies and the structure of polyurethane-based coatings created by different colour pigments, on sound transmission loss properties. To achieve this goal, coatings were created in different concentrations of 5%, 7% and 9% with red, green, orange and yellow pigments. The coatings were applied on glass surfaces and the sound transmission loss was measured by an experimental arrangement containing a microphone and a decibel meter. The effect of surface tension energy, surface roughness, reflection percentages and concentration of pigments were found to be negligible on the sound transmission loss, whereas the LAB colour codes have a determining effect. In the scope of this study, a new method and mathematical model were created to help measure the sound transmission loss on a surface, in which sound signal was carried with a laser beam via a system created in the laboratory.     

An architectural counterpoint in Universal Everything: Fluid Bodies exhibition

ABSTRACT

This exhibition review focuses on the quest for weaving boundaries between body-form-space-and material relationship using immersive technologies. Emerging as an architectural counterpoint, Universal Everything: Fluid Bodies exhibition held in Borusan Contemporary focuses on how we perceive the motion and form in relation to it, as well as fusing senses of kinaesthetic and synaesthetic through a data driven and motion-based visual representation. Through these algorithms, the exhibition displays how neuroarchitecture reminds us of the senses of perception. The architectural counterpoint, intention as an interaction and encounter of the body with ‘the machine’ as the ‘voyeur body’ and how this observational dialogue becomes a research methodology in understanding the nature of movement in space through digital tools.     

Solvent modification effect on the physical and chemical extraction of acetic acid

Combined use of inert diluents with polar modifiers enables former to be utilized for the recovery of polar value-added chemicals. The results show that polarities of both solvent and modifier are critical for efficient separations. Thus, K_D values with 1-octanol were higher than those with 1-decanol; however, those with xylene were superior to those with hexane and toluene. Increasing the amine concentrations increased the K_D values, in contrast to the trends with pH and temperature. About 33%, 79% and 67% of acetic acid was recovered using 25% (v/v) Alamine 336 in xylene, 1-octanol and 30% 1-octanol-modified xylene, respectively. Therefore, solvent modification positively affects the extraction power of inert diluents for acetic acid recovery.     

Efficient manganese decorated cobalt based catalysts for hydrogenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) biofuel

2,5-dimethylfuran (DMF) is a promising compound in the production of biofuel with high-quality properties. In this study, it is aimed to develop new efficient catalysts to synthesize DMF from 5-hydroxymethylfurfural (HMF). Co, Mn/Co, and Ru/Co catalysts were prepared using the NaBH₄ reduction method. The catalysts were subjected to activity tests for the hydrogenation of HMF to DMF by changing the reaction parameters, such as temperature and time. Mn/Co catalysts prepared from metal precursors at various molar ratios of Mn/Co were found to be effective in hydrogenation reactions of HMF to DMF. A 91.8% DMF yield was achieved in the presence of a Mn/Co (50/50) catalyst without noble metal at 180°C for 4 hours. The Brunauer-Emmet-Teller (BET) method, x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), and induction coupled plasma mass spectroscopy (ICP-MS) techniques were used to characterize the efficient Mn/Co catalyst.     

Thermal performance of a solar cooker integrated vacuum-tube collector with heat pipes containing different refrigerants

A solar cooking system using vacuum-tube collectors with heat pipes containing a refrigerant as working fluid has been fabricated, and its performance has been analysed experimentally. The experiments were conducted during clear days in July and August of 2002 in Elazı , Turkey under similar meteorological conditions for three refrigerants and water. Detailed temperature distributions and their time dependences were measured. The maximum temperature obtained in a pot containing 7 l of edible oil was 175 °C. Also, the cooker was successfully used to cook several foods. The cooking processes were performed with the cooker in 27–70 min periods.     

Temperature distributions in boreholes of a vertical ground-coupled heat pump system

The objective of this study is to show the temperature distribution development in the borehole of the ground-coupled heat pump systems (GCHPs) with time. The time interval for the study is 48 h. The vertical GCHP system using R-22 as refrigerant has a three single U-tube ground heat exchanger (GHE) made of polyethylene pipe with a 40 mm outside diameter. The GHE was placed in a vertical borehole (VB) with 30 (VB1), 60 (VB2) and 90 (VB3) m depths and 150 mm diameters. The experimental results were obtained in cooling and heating seasons of 2006–2007. A two-dimensional finite element model (FEM) was developed to simulate temperature distribution development in the soil surrounding the GHEs of GCHPs operating in the cooling and the heating modes. The finite element modelling of the GCHP system was performed using the ANSYS code. The FEM incorporated pipes, the grout and the surrounding formation. From the cases studied, this approach appears to be the most promising for estimation the temperature distribution response of GHEs to thermal loading.     

Modeling a ground-coupled heat pump system by a support vector machine

This paper reports on a modeling study of ground coupled heat pump (GCHP) system performance (COP) by using a support vector machine (SVM) method. A GCHP system is a multi-variable system that is hard to model by conventional methods. As regards the SVM, it has a superior capability for generalization, and this capability is independent of the dimensionality of the input data. In this study, a SVM based method was intended to adopt GCHP system for efficient modeling. The Lin-kernel SVM method was quite efficient in modeling purposes and did not require a pre-knowledge about the system. The performance of the proposed methodology was evaluated by using several statistical validation parameters. It is found that the root-mean squared (RMS) value is 0.002722, the coefficient of multiple determinations (R²) value is 0.999999, coefficient of variation (cov) value is 0.077295, and mean error function (MEF) value is 0.507437 for the proposed Lin-kernel SVM method. The optimum parameters of the SVM method were determined by using a greedy search algorithm. This search algorithm was effective for obtaining the optimum parameters.The simulation results show that the SVM is a good method for prediction of the COP of the GCHP system. The computation of SVM model is faster compared with other machine learning techniques (artificial neural networks (ANN) and adaptive neuro-fuzzy inference system (ANFIS)); because there are fewer free parameters and only support vectors (only a fraction of all data) are used in the generalization process.     

Photolytic and free‐radical polymerization of cinnamate esters of epoxidized plant oil triglycerides

Epoxidized soybean oil was reacted with cinnamic acid with triphenyl phosphine as a catalyst. Cinnamic acid reacted with 79% of the available epoxy groups, and this yielded cinnamate esters of epoxidized soybean oil (ESOCA). ¹H‐NMR, IR, and mass spectra of the new cinnamate derivatives confirmed the proposed structure. The mass spectra revealed that the average number of cinnamate groups per triglyceride molecule was 3.33. ESOCA could be photopolymerized with UV light. ESOCA could also be homopolymerized into a soft and insoluble polymer by free‐radical initiation and copolymerized with styrene, vinyl acetate, and methyl methacrylate. A mixture of ESOCA with 25 wt % styrene had a viscosity of 410 cP and could be free‐radically polymerized with benzoyl tert‐butyl peroxide at elevated temperatures. Differential scanning calorimetry confirmed the formation of copolymers. The ESOCA homopolymer and its copolymers all showed a first‐order transition by differential scanning calorimetry around ?1.5°C that was attributable to side‐chain relaxations of the triglyceride fatty acids. The styrene copolymer of ESOCA showed a tan δ peak at 66.6°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3882–3888, 2003     

A haar wavelet approximation for two-dimensional time fractional reaction–subdiffusion equation

Engineering with Computers - In this study, we established a wavelet method, based on Haar wavelets and finite difference scheme for two-dimensional time fractional reaction–subdiffusion...