碘量法—原子吸收光度法测金的方法对比

总结了目前金矿矿山企业实际生产过程中金含量的测定方法的种类及简单的测定原理,并具有针对性的介绍了实际生产中常用的两种测定方法—活性炭富集碘量法和活性炭富集原子吸收法。因两种测定方式中前期的试样处理及富集过程较为相似,于是将两种测定方法的原理,操作过程,数据结果对比分析等方面做了较为详细的讨论。对两种方法在实际操作中存在的问题给予分析,具有较高的实际生产指导意义。     

某纯电动车高压关键零部件布置方案研究

以某款A0级纯电动汽车研发为例,介绍高压关键零部件在整车上的布置方案和在布置过程中应当注意的问题,包括动力电池、动力总成、高压配电盒、电机控制器、车载充电机布置方案、电动空调压缩机以及其他关键零部件的合理布置方案,为后期车型开发提供参考.     

印度卫星导航系统发展及现状研究

介绍了印度 GPS 辅助型静地轨道增强导航系统(GAGAN)和印度区域卫星导航系统(IRNSS)的最新研究进展，重点介绍了 IRNSS 系统的体系结构、信号样式和导航电文，分析了 IRNSS 系统的能力，最后介绍了印度导航系统的发展计划。     

Precipitating spinel into precursor glass and its assistance in crystallization

The crystallization phenomena of spinel in CaO-MgO-Al₂O₃-SiO₂-Fe₂O₃ glass have received much attention due to the particular role in preparation of glass-ceramic materials, which represent an effective option to manage hazardous waste. In this study, both preliminary spinel and secondary spinel were precipitated in the precursor glass. The formation of these spinel was meticulously assessed by a combination of X-ray diffractometry and scanning electron microscopy. The structure of the microenvironment in the precursor glass was characterized by Raman spectrums. These advanced techniques highlight the potential for one-step crystallization of the glass. The investigation, which focused on one-step crystallization, demonstrated the growth of pyroxene on spinel accompanying a migration of chromium. The results also show the microstructure of the obtained glass-ceramic was very dependent on the heat-treat temperature. This study not only unambiguously reveals the precipitation mechanisms of spinel but also provides more documentation for one-step crystallization in the glass-ceramics field.     

Sparse non-convex Lp regularization for cone-beam X-ray luminescence computed tomography

Cone-beam X-ray luminescence computed tomography (CB-XLCT) is an attractive hybrid imaging modality, and it has the potential of monitoring the metabolic processes of nanophosphors-based drugs in vivo. However, the XLCT imaging suffers from a severe ill-posed problem. In this work, a sparse nonconvex L_p (0?p?L₁ regularization. Further, an iteratively reweighted split augmented lagrangian shrinkage algorithm (IRW_SALSA-L_p) was proposed to efficiently solve the non-convex L_p (0?p?p-values (1/16, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8) in both 3D digital mouse experiments and in vivo experiments. The results demonstrate that the proposed non-convex methods outperform L₂ and L₁ regularization in accurately recovering sparse targets in CB-XLCT. And among all the non-convex p-values, our L_p(1/4?p?相似文献   

中国首例缓倾铋铜金矿脉--曙光(小西南岔)铜金矿床研究新进展

据现场深入研究，结合多年生产实践，首次系统地描述了小西南岔矿床北山矿段缓倾斜铋铜金支矿脉的地质产状、规模、铜和金品位、自然铋与自然金的交生关系。在此基础上，进一步阐述了缓倾铋铜金矿脉对理论、应用研究及矿山确保铜和金入选品位的重要意义。     

伪码连续波交会对接雷达信号处理机设计

介绍了某伪码连续波交会对接雷达信号处理机设计.在测距中,提出用噪声较小的载波相位△伪距测量值对伪距进行处理,得到高精度测距值.在测角中,提出了一种干涉仪天线阵结构和干涉仪解模糊算法,针对通道载波相位误差可能引起的解模糊错误,又提出了一种纠正方法,仿真显示,在发生解模糊错误的概率高达0.42的情况下,该方法仍然可以识别并纠正所有解模糊错误.实验表明,该信号处理机可以满足空间航天器交会对接的要求.     

工业稳定剂间歇过程计算机控制系统

介绍了1套由AB公司的第5代PLC——RSLogix5000和工业PC组成的工业稳定剂间歇过程计算机控制系统。较详细地介绍系统硬件、软件的构成，ControlNet现场总线网络通信的特点，OPC数据传输的优点。同时阐述了在系统硬件设计上如何保证硬件的安全性和抗干扰问题。运行结果表明。该控制系统具有维护简单、运行可靠性高、抗干扰能力强、传输数据速度快的特点。     

聚合物单管分层注入工艺研究

论述了实行聚合物分注的意义;介绍间歇注入、环形降压槽和细长管同心注入管柱结构、工艺特点及其适应性,提出偏心分压分质注聚工艺的研究思路,利用降压配注器对高渗透层实施低压高黏度注聚,对低渗透层利用降解配注器实施低黏度高压注聚;介绍了降压配注器和降黏配注器的结构以及初步地面试验结果.投球式降压配注器最大压降达到2.4 MPa,黏度损失小于10%,降黏配注器采用电化学催化降黏方式,最大降黏率79%,并且降黏率可以调整.     

晶须取向对SiCw/6061Al复合材料热压缩变形行为的影响

采用SEM 和 Magiscan-2A 图像分析系统研究了晶须取向对SiCw/6061Al复合材料在300℃压缩变形行为的影响.结果表明:晶须取向影响着晶须折断程度和转动角度; 随着晶须取向角的增加,晶须转动和折断行为所导致的软化效果下降.同时晶须取向也影响复合材料的热压缩应力-应变曲线的形状.在热压缩变形过程中,晶须取向角为0°和30°的复合材料表现出明显应变软化现象, 晶须取向角为45°的复合材料无明显软化现象.晶须取向角为90℃的复合材料表现出应变硬化现象.