Successful melting and Mg treatment were conducted using a vortex unit which produced spheroidal graphite (SG) Fe ingots having a percentage carbon equivalent (%CE) ranging from 3.782 to 5.240. Microstructure examination revealed graphite nodules embedded in a white matrix (unetched condition). The variation of %CE proved to have a pronounced effect on the nodule characteristics. The nodule count showed a maximum value at %CE of 4.613. For metal-mould ingots it reached a value of 1584 nodules mm–2, while for sand-mould ingots it reached a value of 970 nodules mm–2. Nodule size was found to be inversely proportional to the nodule count for both sand- and metal-mould ingots. The nodularity of all ingots was, in general, higher than 95%. The density of SG Fe was found to decrease gradually (at %CE=3.782) from 7242 to 6969 kg m–3. The modulus of elasticity (E) showed a boat-like curve having minimum values of 189 and 192 GPa for the sand and metal moulds, respectively. 相似文献
To examine the mechanisms of CD4 reconstitution in an adult population, lymphocyte repopulation was assessed following dose-intense chemotherapy in 25 breast cancer patients, ages 33 to 69 years. Chemotherapy resulted in a greater than 60% reduction in total CD4 T cells and, in particular, a greater than 90% loss of the CD45RA+ CD4 cells. CD4 recovery was protracted, achieving less than 50% of pretreatment levels after 12 to 14 months. Two facets of the CD4 recovery were notable. First, generation of CD45RA+ CD4 cells played only a minor role in the first year, suggesting that thymic production was not the main route of CD4 regeneration. Indeed, recovery of CD45RA+ CD4 cell levels remained limited in half of the patients even after 2 years. Second, expansion of the mature peripheral CD4 cells (CD45RO+) remaining after chemotherapy was the main source of early CD4 repopulation, peaking at 3 to 6 months postchemotherapy. This expansion was limited in duration, however, and was followed by a secondary decline, such that the total CD45RO+ CD4 levels at 9 to 12 months were lower than at 6 months. When stimulated by mitogens, an increased susceptibility to apoptosis was observed in postchemotherapy CD4 cells as compared with those from normal donors. The elevated expression of markers such as HLA-DR during chemotherapy and for several months postchemotherapy is consistent with the presence of an activated T-cell population. CD4 apoptotic frequency correlated with the frequency of HLA-DR expression on T cells. Thus, CD4 recovery is constrained in adults by a limited thymic regenerative capacity and by an increased susceptibility to apoptosis within the expanding peripheral CD4 population. 相似文献
The present work discusses the optimal placement of sensors in truss structures in order to obtain best possible information regarding the distortions of the structure. The estimation goal is to reconstruct the deformed shape of the structure, at the controlled degrees of freedom, from the sensor readings. A basic assumption is that the structure is subjected to a parametric disturbance field. We distinguish between disturbances which cause uniform or arbitrary distortions of the structure, and disturbances which cause structured distortions. Uniform distortions can be construed as white noise, that is, distortions which have no characteristics. Structured distortions are chromatic, they have some characteristics which can be helpful in estimating the shape. Although the disturbance in either case is random it is assumed that its magnitude is confined to a hyper sphere. The estimator is based on the least squares method, hence the estimated shape is the one with least RMS displacement for the given sensor readings. To evaluate the performance of each set of sensors a measure is derived based on the concept of the worst case distortion. The measure is the largest possible error between the estimated and the actual displacements, at the CDOF. For small number of sensors all possible arrangements can be generated and compared. Larger trusses with a moderate number of sensors generate prohibitively large number of possible configurations, hence heuristic search techniques are employed. The theory has been applied to 2D and 3D flexible trusses. Results show that for reasonable shape estimation a relatively large number of sensors is needed. It is also shown that when using sensors which measure mainly the distortions of the controlled degrees of freedom, significant improvements in the shape estimation can be obtained. 相似文献
In the era of Industry 4.0, the ease of access to precise measurements in real-time and the existence of machine-learning (ML) techniques will play a vital role in building practical tools to isolate inefficiencies in energy-intensive processes. This paper aims at developing an abnormal event diagnosis (AED) tool based on ML techniques for monitoring the operation of industrial processes. This tool makes it easier for operators to accomplish their tasks and to make quick and accurate decisions to ensure highly efficient processes. One of the most popular ML techniques for AED is the multivariate statistical control (MSC) method; it only requires the dataset of the normal operating conditions (NOC) to detect and identify the variables that contribute to abnormal events (AEs). Despite the popularity of MSC, it is challenging to select the appropriate method for detecting and isolating all possible abnormalities a complex industrial process can experience. To address this limitation and improve efficiency, we have developed a generic methodology that integrates different ML techniques into a unified multiagent based approach, the selected ML techniques are supposed to be built using only the normal operating condition. For the sake of demonstration, we chose a combination of two ML methods: principal component analysis and k-nearest neighbors (k-NN). The k-NN was integrated into the proposed multiagent to take into account the nonlinearity and multimodality that frequently occur in industrial processes. In addition, we modified a k-NN method proposed in the literature to reduce computation time during real-time detection and isolation. Finally, the proposed methodology was successfully validated to monitor the energy efficiency of a reboiler located in a thermomechanical pulp mill.
Surface modification of titania nanoparticles was achieved by coating them with ultrathin alumina films using atomic layer deposition. The coating process was performed in a fluidized bed reactor at low pressure and under mechanical vibration. Films were deposited using self-limiting, sequential surface reactions of trimethylaluminum and water. The composition of alumina-coated particles was verified using infrared spectroscopy. The deposited films had an average growth rate of 0.2 nm/coating cycle and were highly uniform and conformal as demonstrated by transmission electron microscopy and X-ray spectroscopy. Deposited alumina films were amorphous as verified through X-ray diffraction and high-resolution electron microscopy. The coating process did not promote particle sintering as validated via particle size and surface area analysis. 相似文献
Multimedia Tools and Applications - Recently, a new image encryption-scheme for embedded systems based on continuous third-order hyperbolic sine chaotic system, has been proposed. The... 相似文献
Artificial Life and Robotics - Although the design of the reward function in reinforcement learning is important, it is difficult to design a system that can adapt to a variety of environments and... 相似文献
Nanoparticles of copper/cuprous oxide (Cu/Cu2 O) were successfully synthesised by a green chemistry route. The synthesis process was carried out using an extract of Stachys lavandulifolia as both reducing and capping agents with a facile procedure. The nanoparticles were characterised by different techniques including X‐ray diffraction, indicating that the synthesised sample comprised both copper and cuprous oxide entity. The nanoparticles had a mean size of 80 nm and represented an impressive bactericidal effect on Pseudomonas aeruginosa.Inspec keywords: copper, copper compounds, nanoparticles, nanofabrication, nanomedicine, antibacterial activity, X‐ray diffractionOther keywords: nanoparticles synthesis, Stachys lavandulifolia, antibacterial activity, green chemistry route, reducing agents, capping agents, X‐ray diffraction, bactericidal effect, Pseudomonas aeruginosa, Cu‐Cu2 O相似文献