用JSP技术实现XML方案

介绍了网络应用中的XML、JSP及其二者相结合的技术，讨论了在JSP中使用XML数据源的方法和如何使用JSP生成XML数据格式。     

助剂对Pd/树脂醚化催化剂催化性能的影响 Ⅰ.铝助剂的影响

研究了不同助剂对Ｐｄ／树脂醚化催化剂在临氢条件下对催化裂化汽油Ｃ５馏份与甲醇和Ｈ２反应的催化性能的影响。结果表明，在Ｐｄ／树脂醚化催化剂中引入Ｚｒ、Ｔｉ、Ｂ、Ｓｎ和Ａｌ等助剂后，都能改善催化剂的醚化、双键异构和二烯烃选择性加氢活性，其中以Ａｌ、Ｓｎ为最好。Ａｌ助剂的体积质量和负载方式对Ｐｄ－Ａｌ／树脂醚化催化剂的活性有影响。ＢＥＴ方法和Ｘ－射线荧光光谱分析（ＸＦＳＡ）表明，Ａｌ助剂对Ｐｄ－Ａｌ／树脂醚化催化剂的表面积、孔结构和Ｐｄ离子交换量影响较小。     

我国核工业废放射源安全管理

废放射源易于在管理上失去控制，从而酿成事故，对人类和环境造成危害。本文分析了我国废放射源产生的原因，介绍了我国核工业废放射源的现状与安全管理的技术路线和策略，提出了当前所面临的主要问题。     

Structural trends and dielectric properties of Bi-based pyrochlores

The crystal structure and dielectric properties of Bi-based pyrochlore ceramics with formula Bi_1.5ZnM_1.5O₇ (M=Nb, Ta or Sb) were investigated. The three composition ceramics crystallize in the same pyrochlore structure, but the lattice parameters decrease with decreasing B-site ionic radius. Raman spectra analyses were performed to look for short-range structural differences and indicate that the Ta and Sb incorporation into B-site induce the A-site cations array to be more disordered. Ta or Sb replacing Nb lead to smaller dielectric constant and higher temperature coefficient values. The common characteristics for the three compositions are that they have rather low dielectric loss and high resistivity. The dielectric behavior with temperature for BZS and BZT samples were more flat than that of the BZN ceramics. Dielectric abnormal behavior at high temperature for all samples is typically associated with losses by conduction.     

DCS在30m~3聚合釜控制中的应用

介绍了电化厂聚合技改后的聚合釜温度控制方案,CS3000DCS在控制中的应用。实现了从进料、升温、恒温、直至反应结束的全过程自动控制,在操作站实现了动态工程流程图、控制分组、历史趋势等显示功能,可变参数在权限范围内的下载及报表打印等功能。     

聚酯新型催化剂乙二醇锑的工业应用

介绍了国产新型催化剂惭二醇锑在洛阳石油化工总厂聚酯装置上的使用情况，结果表明：乙二醇锑催化剂活性高、易溶解；以乙二醇锑催化剂合成的聚酯产品质量稳定，纺丝时的加工性能明显得到改善。     

Zn-Al系二元相图的研究

利用高温X射线衍射法（XRD）、示差扫描量热分析法（DSC）、热膨胀法（PRD）等方法重新测定Zn-Al二元体系相图。在XRD曲线图中β（ZnAl）相的存在，表明存在β（ZnAl）固溶单相区；DSC曲线图表明在274～279℃范围内存在共析相变反应；PRD曲线图表明在340℃不存在相变反应。综合XRD、DSC和PRD结果，绘制了部分Zn-Al二元体系相图，为高铝锌基合金的实际相变应用提供参考。     

Continuous production of structured phospholipids in a packed bed reactor with lipase from <Emphasis Type="Italic">Thermomyces lanuginosa</Emphasis>

The possibilities of producing structured phospholipids between soybean phospholipids and caprylic acid by lipase-catalyzed acidolysis were examined in continuous packedbed enzyme reactors. Acidolysis reactions were performed in both a solvent system and a solvent-free system with the commercially immobilized lipase from Thermomyces lanuginosa (Lipozyme TL IM) as catalyst. In the packed bed reactors, different parameters for the lipase-catalyzed acidolysis were elucidated, such as solvent ratio (solvent system), temperature, substrate ratio, residence time, water content, and operation stability. The water content was observed to be very crucial for the acidolysis reaction in packed bed reactors. If no water was added to the substrate during reactions under the solvent-free system, very low incorporation corporation of caprylic acid was observed. In both solvent and solvent-free systems, acyl incorporation was favored by a high substrate ratio between acyl donor and phospholipids, a longer residence time, and a higher reaction temperature. Under certain conditions, the incorporation of around 30% caprylic acid can be obtained in continuous operation with hexane as the solvent. Presented at the 95th American Oil Chemists' Society Annual Meeting and Expo in Cincinnati, Ohio, May 10, 2004.     

Lymphatic transport in rats of interesterified oils containing conjugated linoleic acids

In this study we examined the lymphatic transport in rats of FA after administration of interesterified oils containing CLA, with emphasis on the location of CLA and octanoic acid in the TAG. The oils were produced by enzymatic interesterification. Eight oils with different structures or FA profiles were examined in this study: MCM, CMC, OCO, and COC, where M was expected to be octanoic acid and O oleic acid. In group 1, C was CLA as a mixture of the two CLA isomers c9, t11 or t10, c12, and in group 2, C was mainly the isomer t10, c12. Rats were subjected to cannulation of the mesenteric lymph duct, and the following day they were intragastrically administered one of the oils and lymph samples were collected for 24 h. The lymphatic transport of total FA from 0 to 8 h in group 1 was significantly (P < 0.05) higher for the OCO-1 and the COC-1 oils than for the CMC-1 oil. Similarly, in group 2 the transport was higher for the OCO-2 oil than for the CMC-2 oil. The recovery of both of the CLA isomers examined was similar (50-70%) and independent of the isomer, oil structure, and FA profile, whereas more octanoic acid was recovered from the CMC oils than from the MCM oils. The results indicated that the FA profiles and the position of octanoic acid had only a minor influence on the absorption of CLA.     

粒径均匀的氧化铟粉末的研制

以金属铟，硫酸，氨水为原料，通过工艺条件的选择，制备出过滤性良好的氢氧化铟沉淀物。该沉淀物经过干燥，煅烧不需将氧化物粉碎就可以得到粉末状氧化铟。最佳工艺条件为：反应液中铟离子初始浓度调节在70g/L以下，碱添加量为铟含量的3－4倍；沉淀反应温度控制在90℃以上。