Evaluation of Surface Residual Stresses in Friction Stir Welds Due to Laser and Shot Peening

The effects of laser, and shot peening on the residual stresses in friction stir welds (FSW) has been investigated. The surface residual stresses were measured at five different locations across the weld in order to produce an adequate residual stress profile. The residual stresses before and after sectioning the coupon from the welded plate were also measured, and the effect of coupon size on the residual stress relaxation was determined and characterized. Measurements indicate that residual stresses were not uniform along the welded plate, and large variation in stress magnitude could be exhibited at various locations along the FSW plate. Sectioning resulted in significant residual stress relaxation in the longitudinal direction attributed to the large change in dimensions in this direction. Overall, laser and shot peening resulted in a significant reduction in tensile residual stresses at the surface of the specimens.     

Comprehensibility of UML-based software product line specifications

Software Product Line Engineering (SPLE) deals with developing artifacts that capture the common and variable aspects of software product families. Domain models are one kind of such artifacts. Being developed in early stages, domain models need to specify commonality and variability and guide the reuse of the artifacts in particular software products. Although different modeling methods have been proposed to manage and support these activities, the assessment of these methods is still in an inceptive stage. In this work, we examined the comprehensibility of domain models specified in ADOM, a UML-based SPLE method. In particular, we conducted a controlled experiment in which 116 undergraduate students were required to answer comprehension questions regarding a domain model that was equipped with explicit reuse guidance and/or variability specification. We found that explicit specification of reuse guidance within the domain model helped understand the model, whereas explicit specification of variability increased comprehensibility only to a limited extent. Explicit specification of both reuse guidance and variability often provided intermediate results, namely, results that were better than specification of variability without reuse guidance, but worse than specification of reuse guidance without variability. All these results were perceived in different UML diagram types, namely, use case, class, and sequence diagrams and for different commonality-, variability-, and reuse-related aspects.     

Aerosols sampling using a new cryogenic instrument

A new cryogenic instrument was designed for the trapping of aerosols such as cigarette mainstream smoke at low temperature. The technique enabled the trapping of the mainstream smoke of a single cigarette and the particulate and vapor phases were trapped simultaneously. 2R4F reference cigarettes were smoked under International Standard Organization (ISO) regime and trapped at low temperature using the cryogenic instrument. After trapping, the mainstream smoke of the 2R4F reference cigarette was diluted with a solvent and selected smoke components could be quantified using gas-mass spectrometry (GCMS) and high-performance liquid chromatography (HPLC). The capability of the instrument for trapping the mainstream smoke was demonstrated. The feasibility of the procedure for the detection and the quantification of a large range of smoke components including carbonyls, alkaloids and organic volatile compounds (VOC) in the mainstream of a single cigarette was also shown.     

Delineating Boundaries for Imprecise Regions

In geographic information retrieval, queries often name geographic regions that do not have a well-defined boundary, such as “Southern France.” We provide two algorithmic approaches to the problem of computing reasonable boundaries of such regions based on data points that have evidence indicating that they lie either inside or outside the region. Our problem formulation leads to a number of subproblems related to red-blue point separation and minimum-perimeter polygons, many of which we solve algorithmically. We give experimental results from our implementation and a comparison of the two approaches. This research is supported by the EU-IST Project No. IST-2001-35047 (SPIRIT) and by grant WO 758/4-2 of the German Research Foundation (DFG).     

3D Printing Thermally Stable High-Performance Polymers Based on a Dual Curing Mechanism

High-performance polymers are an important class of materials that are used in challenging conditions, such as in aerospace applications. Until now, 3D printing based on stereolithography processes can not be performed due to a lack of suitable materials. There is report on new materials and printing compositions that enable 3D printing of objects having extremely high thermal resistance, with Tg of 283 °C and excellent mechanical properties. The printing is performed by a low-cost Digital Light Processing printer, and the formulation is based on a dual-cure mechanism, photo, and thermal process. The main components are a molecule that has both epoxy and acrylate groups, alkylated melamine that enables a high degree of crosslinking, and a soluble precursor of silica. The resulting objects are made of hybrid materials, in which the silicon is present in the polymeric backbone and partly as silica enforcement particles.