Dielectric and piezoelectric properties of Pb(Ni1/3Nb2/3)O3–PbTiO3–PbZrO3 ceramics modified with bismuth and zinc substitutions

The dielectric and piezoelectric properties of the (Pb_0.985Bi_0.01)(Ni_1/4Zn_1/12Nb_2/3)_x- (Zr_σTi_1-σ)_1-xO₃ piezoelectric ceramic system (0.2 ≤ x ≤ 0.7, 0.1 ≤ σ ≤ 0.9) were systematically investigated. The results showed that, after poling, the dielectric constant, ε ₃₃ ^T , increased for the tetragonal compositions but decreased for the rhombohedral compositions. Furthermore, high values of ε ₃₃ ^T and piezoelectric modulus, d ₃₁ were found for the compositions along the extension of the morphotropic phase boundary. The highest values of the planar electromechanical coupling factor, K _p, and the piezoelectric modulus, d ₃₁, were found to be 0.70 and − 274 × 10^-12 C N^-1, respectively. The Curie temperature, remanent polarization, coercive field and the lattice constants of the a and c axes in relation to the Pb(Ni_1/3Nb_2/3)O₃ content and the Zr/Zr + Ti ratio were also determined. This revised version was published online in November 2006 with corrections to the Cover Date.     

红外加热胶接技术

提出了红外加热胶接的思想，并对红外加热胶接技术作了简单阐述。介绍了一种红外加热胶接矿用阻燃、防腐、橡塑风筒布的装置。     

AUTO CAD图形数据库剖析

本文对ＡＵＴＯ ＣＡＤ图形数据库进行了剖析，分析了系统的图形数据结构，阐述了图形数据库的查询，修改及其应用，以便进一步研究和开发ＡＵＴＯ ＣＡＤ图形系统。     

秦山核电厂安全壳对主蒸汽管道破裂事故的响应

一、概述核电厂安全壳是防止事故后放射性物质大量释放到坏境的最后一道屏障,是保护公众免受超剂量放射性照射的关键设施。人们对安全壳的重要性虽已认识有年,但得到明显事实验证的却是近年发生的美国三哩岛事故和苏联切尔诺贝利灾害性核事故。由表1可知,安全壳的有无对公众的影响是截然不同的。     

原始组织及加热方式对Al-5.8wt%Cu合金熔化行为的影响

利用DSC分析手段，研究了具有3种不同凝固组织的Al-5.8wt%合金在7种不同加热方式下的熔化开始温度和熔化热，发现凝固组织中存在的非平衡共晶在加热过程中大部分扩散溶解，溶入基体，剩余部分参与共晶熔化，其熔化开始温度与组织状态无关，随加热速度的增大略有升高，溶解部分的体积分散与组织状态和加热方式有关，随加热时间和非平衡相表面积的增大而增大。     

电脉冲快速退火对铁基非晶合金性能的影响

采用大电流交流脉冲对非晶Ｆｅ７８Ｂ１３Ｓｉ９合金进行了去应力退火。初步探讨了电脉冲加热对加热速率和该合金内应力释放、退火脆化以及最终软磁性影响的基本规律。结果表明：电脉冲加热可以得到远高于常规退火的加热速率，选择合适工艺参数可使非晶合金内应力释放９０％，软磁性（Ｈ＿ｃ和Ｂ＿ｓ）达常规退火后的９５％以上，与此同时使合金的延性（断裂应变ε＿ｆ）维持在０．９以上，从而有望实现非晶合金磁性与延性的合理配合。     

Asymptotic and robust stability of T‐S fuzzy genetic regulatory networks with time‐varying delays

In this paper, we propose and investigate a new general model of fuzzy genetic regulatory networks described by the Takagi–Sugeno (T‐S) fuzzy model with time‐varying delays. By using a Lyapunov functional approach and linear matrix inequality (LMI) techniques, the stability criteria for the delayed fuzzy genetic regulatory networks are expressed as a set of LMIs, which can be solved numerically by LMI toolbox in Matlab. Two fuzzy genetic network example are given to verify the effectiveness and applicability of the proposed approach. Copyright © 2011 John Wiley & Sons, Ltd.     

添加WC对镍基合金激光熔敷层硬度及腐蚀磨损行为的影响

探讨了添加ＷＣ的镍基合金Ｇ１１２激光熔敷层的性能，结果表明，添加２０％ＷＣ的激光熔敷层的硬度ＨＶ０．２比末添加的提高近一倍，在酸性介质中的耐蚀性有所降低，但腐蚀磨损性能却得到大改善，其腐蚀磨损机制在低冲击速度下，由犁削磨损，坑穴腐蚀及应力腐蚀变为犁削磨损为主，在高冲击速度下，两者的腐蚀磨损机制趋于一致，均为犁削磨损为主，伴以抗穴腐蚀及应力腐蚀。     

井下地磁定位的瞬间强噪声扰动规律研究

地下工程空间点位地磁扰动变化规律是地磁应急定位的基础研究之一.为了研究井下工程监测目标瞬间地磁扰动的特点与规律,选取井下6个水平巷道为试验区,开展了运输车通行和罐笼升降磁扰动时间、扰动距离和扰动噪声大小的监测和匹配定位试验.发现运输车通行和罐笼提升都会对附近点位产生瞬间磁噪声扰动,主要强噪声扰动时间一般在10 s以内,扰动数值约几百至上千纳特.这些瞬间磁扰动会直接影响地磁匹配结果精度.运用中值滤波或小波去噪的方法对匹配数据进行预处理,可以减弱匹配数据中的瞬间强噪声,提高匹配结果的精度.