珠江口盆地惠州地区中新统地层岩性圈闭形成条件分析

区域地质背景反映珠江口盆地惠州地区中新统具有形成地层岩性圈闭的条件。研究惠州地区地层岩性圈闭的形成条件、控制因素和分布规律,对于该区油气勘探持续发展有重要意义。建立了惠州地区中新统高精度的层序地层格架,在此基础上分析不同类型层序的构型特点,研究不同类型坡折带的形成机制、分布范围及对沉积体系的控制作用。层序地层边界和坡折带是控制本区地层岩性圈闭形成的重要因素。惠州地区存在3种具有勘探前景的地层岩性圈闭,选择HZ27-3低位体钻探获得成功。     

多功能复合化学剂在蒸汽吞吐中的应用

辽河油田稠油热采以蒸汽吞吐开采为主,随着注汽轮次的不断增加、生产过程中各种工艺措施的不断介入,油藏受热水及其它侵入介质的影响,综合含水逐步上升,油层近井地带污染日益严重,直接影响了采收率,限制了稠油的高效开发.从油藏地质条件变化和伤害机理入手,开发研制出注蒸汽化学辅助技术--多功能复合化学剂.室内试验和现场应用表明,该技术能有效降低原油粘度、疏通油层、降低油水界面张力、改善稠油流动性、增加油层能量、提高采收率,从根本上改善稠油热采效果.     

The crack of harden cement paste observed with multi-technique

The shrinkage of the cement paste with low water-cement ratio at different relative humidity was observed and analyzed with ESEM and deformation map technique. The crack morphology was observed with different magnification with SEM and FESEM, and the formation of the crack was observed with AFM between two C-S-H nano particles. The observation by multi technique at multi scale indicated that the shrinkage was increase with the decrease of the humidity due to the increase of the pressure of the capillary pressure, the morphology of the crack in smaller scale was similar to that in the bigger scale, the smaller crack distributed in the latticework of the bigger ones, and the crack propagated along the gap between two nano particles of C-S-H with weaker bonding.     

基于家庭网络技术的燃气壁挂炉故障监测系统设计

从燃气壁挂炉维修与维护的局限性出发,提出基于家庭网络技术的燃气壁挂炉故障监测系统。该系统保留传统燃气壁挂炉显示面板和控制主板的通讯接口,硬件上串接一个故障跟踪模块。在家庭网络下,故障跟踪模块过滤出燃气壁挂炉的实时状态信息,通过网络上传到远程服务器。远程协助维修员通过上传的实时状态信息,在线给予用户故障剔除方案。本设计实现了燃气壁挂炉的远程维修与维护,为后续的燃气壁挂炉故障诊断风险分析提供了可靠的依据。     

焊接热输入量对15MnVN钢热影响区断裂韧性的影响

采用COD 试验方法测定了15MnVN 钢多道焊四种热输入量焊接热影响区的断裂韧性。详细观察并测定了其微观组织、晶粒尺寸和不同组织的比例。结果表明,热输入量大,增大了热影响区粗晶区的晶粒尺寸,而由后续焊遭热循环作用产生的细晶区面积则减少,从而提高了转变温度。本文分析了多道焊热影响区脆化的原因和热输入量对脆化程度的影响,提出了板厚56mm 的这种合金钢的合适的焊接热输入量。     

高校计算机课程实验教学浅议

实验教学是高校计算机教学的一项重要内容,本文针对当前大学计算机课程实验教学,从课前、课中、课后对教学进行了讨论,提出了一些建议.     

Clustering high dimensional data: A graph-based relaxed optimization approach

There is no doubt that clustering is one of the most studied data mining tasks. Nevertheless, it remains a challenging problem to solve despite the many proposed clustering approaches. Graph-based approaches solve the clustering task as a global optimization problem, while many other works are based on local methods. In this paper, we propose a novel graph-based algorithm “GBR” that relaxes some well-defined method even as improving the accuracy whilst keeping it simple. The primary motivation of our relaxation of the objective is to allow the reformulated objective to find well distributed cluster indicators for complicated data instances. This relaxation results in an analytical solution that avoids the approximated iterative methods that have been adopted in many other graph-based approaches. The experiments on synthetic and real data sets show that our relaxation accomplishes excellent clustering results. Our key contributions are: (1) we provide an analytical solution to solve the global clustering task as opposed to approximated iterative approaches; (2) a very simple implementation using existing optimization packages; (3) an algorithm with relatively less computation time over the number of data instances to cluster than other well defined methods in the literature.     

立式数控车床的工业设计研究

主要阐述了立式数控车床设计的一般原则,主要包括安全性原则、可用性原则和美学原则,并结合实例产品具体说明工业设计原则在立式数控车床设计上的应用。     

MoS2/C纳米复合材料的合成及其电化学性能研究

理论比能量高达2 600 Wh/kg的锂硫电池已经成为锂电池研究热点,然而硫导电性不好、穿梭效应和锂化体积效应较大等问题阻碍了锂硫电池的产业化。将无定型多孔碳材料的高导电性和极性MoS₂的固硫作用相结合改善锂硫电池的电化学性能。所得的S@MoS₂/C在0.05 C和2 C电流密度下的放电比容量分别为1 507和406.3 mAh/g,比S@MoS₂在相同电流密度下的放电比容量（1 400和345.7 mAh/g）更高。在循环性能测试中,S@MoS₂/C容量保持率为46.9%,要高于S@MoS₂（39.1%）。因此,MoS₂/C复合材料作为硫载体可以显著改善锂硫电池性能。     

Preparation and dielectric properties of La doped NBCCTO ceramics

Journal of Electroceramics - CaCu3Ti4O12 ceramics have great dielectric constant, excellent temperature stability and good frequency stability. However, due to high dielectric loss, its practical...