排序方式: 共有30条查询结果,搜索用时 15 毫秒
1.
Isolation enhancement between tightly spaced compact unidirectional patch‐antennas on multilayer EBG surfaces
下载免费PDF全文
![点击此处可从《国际射频与微波计算机辅助工程杂志》网站下载免费的PDF全文](/ch/ext_images/free.gif)
In this article, ultracompact unidirectional patch antennas are used in different two‐antenna systems for biomedical applications at 5.2 GHz. Multilayer mushroom type electromagnetic bandgap (EBG) structures are designed as slow‐wave medium to reduce the size of the individual patch antennas to 0.1λ0 by 0.18λ0. Various techniques are investigated herein to improve antenna isolation for an enhanced Multiple‐Input Multiple‐Output (MIMO) performance. First, the coupling between 0.3λ0‐spaced antennas is verified to occur dominantly through radiation and near‐field coupling between the patches rather than through substrate‐bound modes. Second, various configurations are proposed to suppress antenna coupling. These approaches include reorientation of the antennas and employment of parasitic radiators between the patches. A novel design is presented in which a unidirectional parasitic slot radiator on an EBG reflector is inserted between the antennas to decouple them. Measurement results confirm efficacy of these approaches in mitigating antenna coupling by more than 11 dB in the operating bandwidth of the antennas. The compact patch antennas maintain efficiency values of higher than 70%. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:30–38, 2015. 相似文献
2.
Afarin Bahrami Zainal Abidin Talib Wan Mahmood Mat Yunus Kasra Behzad Mahnaz M. Abdi Fasih Ud Din 《International journal of molecular sciences》2012,13(11):14917-14928
Polypyrrole (PPy) and polypyrrole-carboxylic functionalized multi wall carbon nanotube composites (PPy/f-MWCNT) were synthesized by in situ chemical oxidative polymerization of pyrrole on the carbon nanotubes (CNTs). The structure of the resulting complex nanotubes was characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The effects of f-MWCNT concentration on the electrical properties of the resulting composites were studied at temperatures between 100 K and 300 K. The Hall mobility and Hall coefficient of PPy and PPy/f-MWCNT composite samples with different concentrations of f-MWCNT were measured using the van der Pauw technique. The mobility decreased slightly with increasing temperature, while the conductivity was dominated by the gradually increasing carrier density. 相似文献
3.
Muhammad Y Bashouti Kasra Sardashti Jürgen Ristein Silke Christiansen 《Nanoscale research letters》2013,8(1):41
Oxidation of silicon nanowires (Si NWs) is an undesirable phenomenon that has a detrimental effect on their electronic properties. To prevent oxidation of Si NWs, a deeper understanding of the oxidation reaction kinetics is necessary. In the current work, we study the oxidation kinetics of hydrogen-terminated Si NWs (H-Si NWs) as the starting surfaces for molecular functionalization of Si surfaces. H-Si NWs of 85-nm average diameter were annealed at various temperatures from 50°C to 400°C, in short-time spans ranging from 5 to 60 min. At high temperatures (T ≥ 200°C), oxidation was found to be dominated by the oxide growth site formation (made up of silicon suboxides) and subsequent silicon oxide self-limitation. Si-Si backbond oxidation and Si-H surface bond propagation dominated the process at lower temperatures (T < 200°C). 相似文献
4.
Kasra Barkeshli 《Journal of Infrared, Millimeter and Terahertz Waves》1992,13(2):171-196
Electromagnetic scattering from a two-dimensional groove recessed in an arbitrarily thick conducting screen is studied. The groove may be empty or loaded with a lossy material which may or may not completely fill the cavity. For the partially loaded groove, the filling material is assumed electrically dense so that the standard impedance boundary condition is applicable at the top surface of the material. Employing a full-wave analysis, integral equations are derived for the tangential components of the electric field over the aperture. It is shown that the equations are identical for both partially loaded and completely loaded (or empty) cases provided that the aperture admittance of the groove is treated as the equivalent admittance of the internal medium looking into the aperture, thus simplifying the integral equations. When the groove is completely filled by a dense material, the formulation reduces to that corresponding to a direct application of the impedance boundary condition over the aperture. 相似文献
5.
Dounya Barrit Peirui Cheng Kasra Darabi Ming‐Chun Tang Detlef‐M. Smilgies Shengzhong Liu Thomas D. Anthopoulos Kui Zhao Aram Amassian 《Advanced functional materials》2020,30(11)
The two‐step conversion process consisting of metal halide deposition followed by conversion to hybrid perovskite has been successfully applied toward producing high‐quality solar cells of the archetypal MAPbI3 hybrid perovskite, but the conversion of other halide perovskites, such as the lower bandgap FAPbI3, is more challenging and tends to be hampered by the formation of hexagonal nonperovskite polymorph of FAPbI3, requiring Cs addition and/or extensive thermal annealing. Here, an efficient room‐temperature conversion route of PbI2 into the α‐FAPbI3 perovskite phase without the use of cesium is demonstrated. Using in situ grazing incidence wide‐angle X‐ray scattering (GIWAXS) and quartz crystal microbalance with dissipation (QCM‐D), the conversion behaviors of the PbI2 precursor from its different states are compared. α‐FAPbI3 forms spontaneously and efficiently at room temperature from P2 (ordered solvated polymorphs with DMF) without hexagonal phase formation and leads to complete conversion after thermal annealing. The average power conversion efficiency (PCE) of the fabricated solar cells is greatly improved from 16.0(±0.32)% (conversion from annealed PbI2) to 17.23(±0.28)% (from solvated PbI2) with a champion device PCE > 18% due to reduction of carrier recombination rate. This work provides new design rules toward the room‐temperature phase transformation and processing of hybrid perovskite films based on FA+ cation without the need for Cs+ or mixed halide formulation. 相似文献
6.
Nilofar Asim Kamaruzzaman Sopian Shideh Ahmadi Kasra Saeedfar M.A. Alghoul Omidreza Saadatian Saleem H. Zaidi 《Renewable & Sustainable Energy Reviews》2012,16(8):5834-5847
The demand for energy of modern society is constantly increasing. The desire for environmental-friendly alternative energy resources with the least dependency on fossil fuels is growing. Solar energy is an important technology for many reasons and is worthy of urgent attention. Indeed, it has experienced rapid growth over the last few years. It is expected to become truly main stream when the breakeven of high performance is achieved and its cost becomes comparable with other energy sources. Various approaches have been proposed to enhance the efficiency of solar cells. This paper reviews some current initiatives and critical issues on the efficiency improvement of solar cells from the material sciences and chemistry perspectives. 相似文献
7.
In real fluidized beds various fluidization regimes may occur simultaneously resulting in quite distinct hydrodynamic characteristics in various regions of the bed. Classical approaches, generally, use a step drag function with a single switching point to distinguish dense and dilute regimes. In the present study, a new integrated hydrodynamic model (drag and viscosity) is developed using a smooth logistic function with two switching points dividing a fluidized bed into three dense, dilute and mixed regimes which is more in accordance with reality. Gas volume fraction at minimum fluidization velocity and particle Geldart’s group are employed to decide switching between dense and dilute drag and viscosity models. A spatiotemporal dynamic algorithm is used to implement the integrated model into the open source CFD package OpenFOAM 2.1.1. Reasonable predictions of various hydrodynamic characteristics in three different experimental data sets demonstrate wide applicability of the new integrated hydrodynamic model to any fluidization regime. 相似文献
8.
Nastaran Faraji W. Mahmood Mat Yunus Alireza Kharazmi Elias Saion Kasra Behzad 《International Journal of Thermophysics》2014,35(1):53-61
CdS nanofluids were prepared by the gamma-radiation method at different radiation doses. The samples were characterized by UV–Vis spectroscopy and transmission electron microscopy. The open cell photoacoustic technique was used to measure the thermal effusivity of the CdS nanocomposites. In this technique a He–Ne laser was used as the excitation source and was operated at 632.8 nm with an output power of 70 mW. The precision and accuracy of this technique were initially established by measuring the thermal effusivity of distilled water and ethylene glycol. The thermal-effusivity values of these two samples were found to be close to the values reported in the literature. The thermal effusivity of CdS nanofluids decreased from (0.453 to 0.268) $\mathrm {W}\cdot \mathrm {S}^{1/2}\cdot \mathrm {cm}^{-2}\cdot \mathrm {K}^{-1}$ with increased dosage of gamma radiation. 相似文献
9.
Kasra Pirzadeh Ali Asghar Ghoreyshi Mostafa Rahimnejad Maedeh Mohammadi 《Korean Journal of Chemical Engineering》2018,35(4):974-983
The electrochemical route is a promising and environmentally friendly technique for fabrication of metal organic frameworks (MOFs) due to mild synthesis condition, short time for crystal growth and ease of scale up. A microstructure Cu3(BTC)2 MOF was synthesized through electrochemical path and successfully employed for CO2 and CH4 adsorption. Characterization and structural investigation of the MOF was carried out by XRD, FE-SEM, TGA, FTIR and BET analyses. The highest amount of carbon dioxide and methane sorption was 26.89 and 6.63 wt%, respectively, at 298 K. The heat of adsorption for CO2 decreased monotonically, while an opposite trend was observed for CH4. The results also revealed that the selectivity of the developed MOF towards CO2 over CH4 enhanced with increase of pressure and composition of carbon dioxide component as predicted by the ideal adsorption solution theory (IAST). The regeneration of as-synthesized MOF was also studied in six consecutive cycles and no considerable reduction in CO2 adsorption capacity was observed. 相似文献
10.
Kowalska P Cheeseman JR Razmkhah K Green B Nafie LA Rodger A 《Analytical chemistry》2012,84(3):1394-1401
This paper reports the development of the new technique of Raman linear difference (RLD) spectroscopy and its application to small molecules: anthracene and nucleotides adenosine-5'-monophosphate, thymidine-5'-monophosphate, guanosine-5'-monophosphate, and cytidine-5'-monophosphate. In this work we also present a new alignment method for Raman spectroscopy where stretched polyethylene films are used as the matrix. Raman spectra using light polarized along the orientation direction and perpendicular to it are reported. The polyethylene (PE) film spectra are consistent with powder samples and films deposited on quartz. RLD spectra determined from the difference of the parallel and perpendicular polarized light Raman spectra are also reported. The equations describing RLD are derived, and RLD spectra of anthracene and thymidine are calculated from these equations using Density Functional Theory and assuming perfect orientation of the samples. Because of the wealth of spectroscopic information in the vibrational spectra of biomolecules together with our ability to calculate spectra as a function of orientation, we conclude that RLD has the potential to provide structural information for biological samples that currently cannot be extracted from any other method. 相似文献